summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2016-01-21rockchip: jerry: Fix the SDRAM timingSimon Glass
There is a minor error in the SDRAM timing. It does not seem to affect anything so far. Fix it just in case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: spl: Drop MMC support code when not neededSimon Glass
When the board does not use MMC SPL this code is a waste of space. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: Tidy up the register-access macrosSimon Glass
These work reasonable well, but there are a few errors: - Brackets should be used to avoid unexpected side-effects - When setting bits, the corresponding upper 16 bits should be set also Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: sdram: Use syscon_get_first_range() where possibleSimon Glass
This is a shortcut to obtaining a register address. Use it where possible, to simplify the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: sdram: Tidy up a few commentsSimon Glass
Fix spaces in two comments in this file. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: Add a simple 'clock' commandSimon Glass
Add a command that displays the PLLs and their current rate. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: Don't skip low-level initSimon Glass
At present the low-level init is skipped on rockchip. Among other things this means that the instruction cache is left disabled. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: video: Add a video-output driverSimon Glass
Some rockchip SoCs include video output (VOP). Add a driver to support this. It can output via a display driver (UCLASS_DISPLAY) and currently HDMI and eDP are supported. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: video: Add a display driver for rockchip eDPSimon Glass
Some Rockchip SoCs support embedded DisplayPort output. Add a display driver for this so that these displays can be used on supported boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: video: Add a display driver for rockchip HDMISimon Glass
Some Rockchip SoCs support HDMI output. Add a display driver for this so that these displays can be used on supported boards. Unfortunately this driver is not fully functional. It cannot reliably read EDID information over HDMI. This seems to be due to the clocks being incorrect - the I2C bus speed appears to be up to 100x slower than the clock settings indicate. The root cause may be in the clock logic. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: Rename the CRU_MODE_CON fieldsSimon Glass
These should match the datasheet naming. Adjust them. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21pwm: rockchip: Add a PWM driver for Rockchip SoCsSimon Glass
Add a simple driver which implements the standard PWM uclass interface. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: jerry: Enable the Chrome OS ECSimon Glass
Turn on the EC and enable the keyboard. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: clk: Make rkclk_get_clk() SoC-specificSimon Glass
The current method assumes that clocks are numbered from 0 and we can determine a clock by its number. It is safer to use an ID in the clock's platform data to avoid the situation where another clock is bound before the one we expect. Move the existing code into rk3036 since it still works there. Add a new implementation for rk3288. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: reset: Use the rk_clr/setreg() interfaceSimon Glass
Use this function in preference to the macro. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: sdram: Use the rk_clr/setreg() interfaceSimon Glass
Use this function in preference to the macro. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: clock: Add a function to find a clock by IDSimon Glass
The current approach of using uclass_get_device() is error-prone. Another clock (for example a fixed-clock) may cause it to break. Add a function that does a proper search. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: jerry: Disable pmic-int-1 setup to avoid a hangSimon Glass
This hangs when activated (by probing the PMIC). Disable it for now until we understand the root cause. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: Use pwrseq for MMC start-up on jerrySimon Glass
This is defined in the device tree in Linux. Copy over the settings so that this can be used instead of hard-coding the reset line. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: Convert the PMU IOMUX registers into an arraySimon Glass
This is easier to deal with when using generic code since it allows us to use a register index instead of naming each register. Adjust it, adding an enum to improve readability. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: Avoid using MMC code when not booting from MMCSimon Glass
This saves some code space in SPL which is useful on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21ARM: bootm: Try to use relocated ramdiskJeffy Chen
After boot_ramdisk_high(), ramdisk would be relocated to initrd_start & initrd_end, so use them instead of rd_start & rd_end. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-21Merge git://git.denx.de/u-boot-dmTom Rini
2016-01-21Merge branch 'master' of git://git.denx.de/u-boot-i2c; branch 'master' of ↵Tom Rini
git://git.denx.de/u-boot-nds32
2016-01-21sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
2016-01-21nds32: Fix compile error.rick
Fix compile error with gcc 4.9.3 Signed-off-by: rick <rick@andestech.com> Cc: Andes <uboot@andestech.com>
2016-01-20dm: video: test: Add tests for the video uclassSimon Glass
Add tests that check that the video console is working correcty. Also check that text output produces the expected result. Test coverage includes character output, wrapping and scrolling. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20dm: video: sandbox: Convert sandbox to use driver model for videoSimon Glass
Now that driver model support is available, convert sandbox over to use it. We can remove a few of the special hooks that sandbox currently has. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20arm: ls1021atwr: Enable driver model lpuart serial driverBin Meng
Convert ls1021atwr_nor_lpuart to driver model support. As a start, enable lpuart serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alison Wang <alison.wang@nxp.com> Tested-by: Alison Wang <alison.wang@nxp.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20arm: ls1021atwr: Split off board device treeBin Meng
Move /chosen node out of the board device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20arm: ls1021atwr: Convert to driver model and enable serial supportBin Meng
Convert ls1021atwr_nor to driver model support. As a start, enable ns16550 serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20arm: dts: dra7-evm: add tick-timer to chosen nodeMugunthan V N
Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20arm: dts: dra72-evm: add tick-timer to chosen nodeMugunthan V N
Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20arm: dts: am335x-evm: add tick-timer to chosen nodeMugunthan V N
Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20arm: dts: am335x-boneblack: add tick-timer to chosen nodeMugunthan V N
Specify which timer to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20arm: dts: am437x-gp-evm: add tick-timer to chosen nodeMugunthan V N
Specify which timer to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20arm: dts: am437x-sk-evm: add tick-timer to chosen nodeMugunthan V N
Specify which timer to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20arm: omap-common: do not build timer when CONFIG_TIMER definedMugunthan V N
To prepare timer driver to DM/DT conversion do not build the exiting timer driver when CONFIG_TIMER is defined. But since omap's SPL doesn't support DM yet so built timer driver only for SPL build when CONFIG_TIMER is defined. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20stm32: move stm32 specific code to mach-stm32Vikas Manocha
This patch moves stm32 sources at one place, with this armv7m now contains only generic stuff. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-01-20armv7: Add missing newline after OMAP die IDLadislav Michl
Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
2016-01-20m68k: M54418TWR: drop board/freescale/m54418twr/config.mkMasahiro Yamada
The board/freescale/m54418twr/config.mk defined TEXT_BASE, which has the same value as CONFIG_SYS_TEXT_BASE. The TEXT_BASE is referenced by two files: - arch/m68k/cpu/mcf5445x/start.S and include/ - include/configs/M54418TWR.h Replace the references with CONFIG_SYS_TEXT_BASE and delete board/freescale/m54418twr/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Angelo Dureghello <angelo at sysam.it>
2016-01-20arm, ubifs: fix gcc5.x compiler warningHeiko Schocher
compiling U-Boot for openrd_base_defconfig with gcc 5.x shows the following warning: CC fs/ubifs/super.o In file included from fs/ubifs/ubifs.h:35:0, from fs/ubifs/super.c:37: fs/ubifs/super.c: In function 'atomic_inc': ./arch/arm/include/asm/atomic.h:55:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ fs/ubifs/super.c: In function 'atomic_dec': ./arch/arm/include/asm/atomic.h:64:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/sb.o [...] CC fs/ubifs/lpt.o In file included from include/linux/bitops.h:123:0, from include/common.h:20, from include/ubi_uboot.h:17, from fs/ubifs/ubifs.h:37, from fs/ubifs/lpt.c:35: fs/ubifs/lpt.c: In function 'test_and_set_bit': ./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/lpt_commit.o In file included from include/linux/bitops.h:123:0, from include/common.h:20, from include/ubi_uboot.h:17, from fs/ubifs/ubifs.h:37, from fs/ubifs/lpt_commit.c:26: fs/ubifs/lpt_commit.c: In function 'test_and_set_bit': ./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/scan.o CC fs/ubifs/lprops.o CC fs/ubifs/tnc.o In file included from include/linux/bitops.h:123:0, from include/common.h:20, from include/ubi_uboot.h:17, from fs/ubifs/ubifs.h:37, from fs/ubifs/tnc.c:30: fs/ubifs/tnc.c: In function 'test_and_set_bit': ./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/tnc_misc.o Fix it. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-01-20ARM: uniphier: remove unneeded if conditionalsMasahiro Yamada
The if block does the same as the else block does. The conditional is not necessary at all. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: move UMC register macros to umc-regs.hMasahiro Yamada
The umc-proxstream2.c defiens the same macros as in umc-regs.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: set active ways to really enable outer cacheMasahiro Yamada
Each way must be unlocked to make it effective. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: fix range invalidate for outer cacheMasahiro Yamada
If invalidate operation is invoked against a cache-unaliged region, the both ends of the region should be flushed, not invalidated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: factor out outer cache sync as a helper functionMasahiro Yamada
Avoid repeating the same code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: refactor outer cache operation slightlyMasahiro Yamada
Improve readability without changing the behavior. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-19armv8: cavium: Add ThunderX 88xx board definitionSergey Temerkhanov
This commit adds basic Cavium ThunderX 88xx board definitions and support. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> [trini: Drop CONFIG_SYS_GENERIC_BOARD define] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19armv8: cavium: Add the device tree for ThunderXSergey Temerkhanov
This commit adds the FDT for the ThunderX family of SoCs Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-28 13:54:31 +0000