summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-08-22arm: sama5d3: fix smc cs related registers offsetBo Shen
the smc cs related registers start at 0x600 and loop with 5 registers so the reserved register should be in at91_smc structure while no in at91_cs structure. So fix it Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22ARM: at91: sama5d3: remove unused definition about PMECC alpha table offsetWu, Josh
Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22ARM: at91: atmel_nand: pmecc driver will select the galois table by sector sizeWu, Josh
Define the galois index table offset in chip head file. So user do not need to set by himself. Driver will set it correctly according to sector_size. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> [rebased on master] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22arm: atmel: add gmac support for sama5d3xek boardBo Shen
add gmac support for sama5d3xek board, the gmac embedded in: - sama5d33, sama5d34, sama5d35 Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-17Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-08-15Add TI816X supportTENART Antoine
Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> [trini: Fix warnings about vtp things in emif4.c, adapt AM43XX] Signed-off-by: Tom Rini <trini@ti.com>
2013-08-15Prepare for TI816X : reuse existing code from TI814XTENART Antoine
Rename some CONFIG_TI814X to a more generic CONFIG_TI81XX Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> [trini: Adapt for CONFIG_OMAP_COMMON changes, AM43XX] Signed-off-by: Tom Rini <trini@ti.com>
2013-08-15arm, da850: enable the correct uart in arch_cpu_init()Heiko Schocher
in arch_cpu_init() uart2 is fix enabled, without reference the setting from CONFIG_SYS_NS16550_COM1. Use the setting from CONFIG_SYS_NS16550_COM1 for enabling the console. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <tom.rini@gmail.com> Cc: Christian Riesch <christian.riesch@omicron.at>
2013-08-15arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in ↵Heiko Schocher
emac_pins_rmii pinmux Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
2013-08-15arm: spl: For Falcon Mode, set a default machid of ~0Tom Rini
With device trees, boards do not always set CONFIG_MACH_TYPE now, so we must not rely on this define being set. The kernel uses ~0 to see if we have a valid machine number or not, so set that as the default, invalid machine, id and only fix if CONFIG_MACH_TYPE is set. Acked-by: Dan Murphy <dmurphy@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Tom Rini <trini@ti.com>
2013-08-15omap: emif: Set initial DDR PHY config firstTaras Kondratiuk
Commit "OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon" (f40107345cbcd6e0d1747eda45e76c4e2a6df0db) changed sequence to set final DDR PHY config register value at the beginning. Looks like it was made by mistake and should be reverted. Signed-off-by: Taras Kondratiuk <taras@ti.com>
2013-08-15ARM: omap24xx: remove remainders of dead boardMasahiro Yamada
Since Commit 7f5eef9 removed OMAP2420H4 support, arm1136/omap24xx has not been used at all. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-08-15ARM: omap3: Implement dpll5 (HSUSB clk) workaround for OMAP36xx/AM/DM37xx ↵Naumann Andreas
according to errata sprz318e. In chapter 'Advisory 2.1 USB Host Clock Drift Causes USB Spec Non-compliance in Certain Configurations' of the TI Errata it is recommended to use certain div/mult values for the DPLL5 clock setup. So far u-boot used the old 34xx values, so I added the errata recommended values specificly for 36xx init only. Also, the FSEL registers exist no longer, so removed them from init. Tested this on a AM3703 board with 19.2MHz oscillator, which previously couldnt lock the dpll5 (kernel complained). As a consequence the EHCI USB port wasnt usable in U-Boot and kernel. With this patch, kernel panics disappear and USB working fine in u-boot and kernel. Signed-off-by: Andreas Naumann <anaumann@ultratronik.de> [trini: Add extern to <asm/arch-omap3/clock.h> Signed-off-by: Tom Rini <trini@ti.com>
2013-08-15ARM: AM43xx: Add build supportLokesh Vutla
Add AM43xx support in the required places Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15ARM: OMAP: Add CONFIG_OMAP_COMMONLokesh Vutla
Adding a new CONFIG_OMAP_COMMON which is included by all boards that needs to build cpu/armv7/omap-common folder. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15ARM: AM43xx: clocks: Add dpll and clock dataLokesh Vutla
Add dpll and clock data for AM43xx Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15ARM: AM43xx: Add header filesLokesh Vutla
Adding the following data: -> Prcm structure -> Base addresses -> Pin mux structure. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15ARM: AM33xx: Move s_init to a common placeHeiko Schocher
s_init has the same outline for all the AM33xx based board. So making it generic. This also helps in addition of new Soc with minimal changes. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2013-08-15ARM: AM33xx: Cleanup clocks layerLokesh Vutla
Cleaning up the clocks layer. This helps in addition of new Soc with minimal changes. This is derived from OMAP4 boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2013-08-15ARM: AM33xx: Cleanup dplls dataLokesh Vutla
Locking sequence for all the dplls is same. In the current code same sequence is done repeatedly for each dpll. Instead have a generic function for locking dplls and pass dpll data to that function. This is derived from OMAP4 boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2013-07-31Merge git://git.denx.de/u-boot-armStefano Babic
Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-07-30am335x_evm: Add support to boot from NOR.Steve Kipisz
NOR requires that s_init be within the first 4KiB of the image so that we can perform the rest of the required pinmuxing to talk with the rest of NOR that we are found on. When NOR_BOOT is set we save our environment in NOR at 512KiB and a redundant copy at 768KiB. We avoid using SPL for this case and u-boot.bin is written directly to the start of NOR. We enclose the DMM-related parts of arch/arm/cpu/armv7/am33xx/emif4.c with TI81xx checks as at this time U-Boot does not discard unused sections in the main build and this code relies on functions specific to (and only provided in) ti81xx-related code. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-07-30am335x_evm: Add support for the NOR module on the memory capeSteve Kipisz
This patch adds support for the NOR module that attaches to the memory cape for a Beaglebone board. This does not add booting support; only support so that you can boot from SD/MMC and see the NOR module so that it can be programmed. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> [trini: Clean up config changes slightly] Signed-off-by: Tom Rini <trini@ti.com>
2013-07-30am33xx: Correct gpmc_cfg->irqstatus/enableTom Rini
Based on our usage of the GPMC, either with NOR or NAND we do not need to be setting the irqstatus or irqenable bits and should clear them like we have historically. Signed-off-by: Tom Rini <trini@ti.com>
2013-07-27imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitorsRobert Winkler
A little background is probably appropriate for this patch. Since "the beginning" of usage of the SABRE Lite and Nitrogen6x boards, DVI detection has been somewhat broken. Some (most) DVI monitors don't produce the "HPD" bit in the PHY_STAT0 register, but do show proper toggling of the RX_SENSE0..3 bits. Creating a new the bit-mask to include all five bits and modifying the 'hdmidet' command and internal detection routines allows these monitors to function properly in U-Boot. A related patch to our kernels allows things to work under Linux: https://github.com/boundarydevices/linux-imx6/commit/7d8752905c118af9063738a533227de0b2f6ecd4 Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2013-07-27mx6: Factor out common HDMI setup codePardeep Kumar Singla
Instead of duplicating HDMI setup code for every mx6 board, factor out the common code Signed-off-by: Pardeep Kumar Singla <b45784@freescale.com> Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
2013-07-26ARM: DRA7xx: Add CPSW support to DRA7xx EVMMugunthan V N
Adding support for CPSW Ethernet support found in DRA7xx EVM Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2013-07-26ARM: DRA7xx: Enable GMAC clock controlMugunthan V N
Enabling CPSW module by enabling GMAC clock control Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2013-07-26ARM: DRA7xx: Lock DPLL_GMACLokesh Vutla
Locking DPLL_GMAC [mugunthanvnm@ti.com:Configure only if CPSW is selected] Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2013-07-26omap3/sys_info: fix printout of OMAP36XX L3 freqencyAndreas Bießmann
The OMAP36xx/OMAP37xx family uses L3 frequency of 200MHz instead of 165MHz used by OMAP34xx/OMAP35xx. Also fix checkpatch warning about alignment. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-07-26arm: omap3: spl: Fix problem with 8bit NAND devicesStefan Roese
Currently in OMAP3 SPL, the GPMC for NAND is configured for 16bit access. This patch adds support for 8bit NAND devices as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com>
2013-07-25Merge branch 'u-boot/master' into u-boot-arm/masterAlbert ARIBAUD
2013-07-25Merge branch 'master' of git://git.denx.de/u-boot-nds32Tom Rini
2013-07-25Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
Conflict over SPDX changes means that one change was effectively dropped as it was fixing typos in a removed hunk of text. Conflicts: arch/mips/cpu/mips64/start.S Signed-off-by: Tom Rini <trini@ti.com>
2013-07-25nds32: Enable FPU if the version of CPU supportedken kuo
Some version of Andes core support FPU coprocessor, if this is the case, and toolchain support FPU instruction set, we should enable it at low level initialization time. Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com> Cc: Macpaul Lin <macpaul@gmail.com>
2013-07-25nds32: Update <asm/io.h> and <asm/setup.h> with SPDX license identifiersTom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-25nds32: Convert Makefiles to use COBJS-y styleken kuo
Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com> Cc: Macpaul Lin <macpaul@gmail.com>
2013-07-25ARM: highbank: avoid bss write in timer_initRob Herring
The timer_init function is called before relocation and writes to bss data were corrupting relocation data. Fix this by removing the call to reset_timer_masked. The initial timer count should be 0 or near 0 anyway, so initializing the variables are not needed. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-07-25ARM: highbank: set timer prescaler to 256Rob Herring
The 150MHz clock rate gives u-boot time functions problems and there's no benefit to a fast clock, so lower the rate. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-07-25ARM: highbank: fix get_tbclk value to timer rateRob Herring
get_tbclk should return the timer's frequency, not CONFIG_SYS_HZ. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-07-25ARM: move interrupt_init to before relocationRob Herring
interrupt_init also sets up the abort stack, but is not setup before relocation. So any aborts during relocation will hang and not print out any useful information. Fix this by moving the interrupt_init to after the stack setup in board_init_f. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-07-24MIPS: mips32/cache.S: use v1 register for indirect function callsGabor Juhos
Synchronize the code with mips64/cache.S, in order to allow further unifications. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-07-24MIPS: mips32/cache.S: store cache line size in t8 registerGabor Juhos
Synchronize the code with mips64/cache.S, in order to allow further unifications. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-07-24MIPS: mips32/cache.S: save return address in t9 registerGabor Juhos
Synchronize the code with mips64/cache.S, in order to allow further unifications. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-07-24MIPS: xburst/start.S: rework relocation info checkGabor Juhos
Make it similar to the code in mips{32,64}/start.S, in order to allow further unifications. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-07-24MIPS: xburst/start.S: use t8 register for dynamic relocationGabor Juhos
Synchronize the code with mips{32,64}/start.S, in order to allow further unifications. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-07-24MIPS: xburst/start.S: save gd in s0 registerGabor Juhos
Synchronize the code with mips{32,64}/start.S, in order to allow further unifications. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-07-24MIPS: xburst/start.S: save relocation offset in s1 registerGabor Juhos
Synchronize the code with mips{32,64}/start.S, in order to allow further unifications. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-07-24MIPS: xburst/start.S: save relocation address in s2 registerGabor Juhos
Synchronize the code with mips{32,64}/start.S, in order to allow further unifications. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-07-24MIPS: mips32/start.S: rework relocation info checkGabor Juhos
Make it similar to the code in mips64/start.S, in order to allow further unifications. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
generated by cgit (git 2.34.1) at 2024-12-29 15:44:48 +0000