summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2018-10-22imx8: cpu: add function for reading FEC MAC from fuseAnatolij Gustschin
FEC driver requires imx_get_mac_from_fuse(). Add it in preparation for ENETx support. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx8: add arch_cpu_init arch_cpu_init_dmPeng Fan
Add arch_cpu_init(_dm) mainly to open the channel between ACore and SCU. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add mmu and dram related functionsPeng Fan
Add mmu memmap, some memory regions are reserved by M4, Arm Trusted Firmware, so need to get memreg using SCFW API and setup the memmap. Add dram_init, dram_init_banksize, get_effective_memsize functions, according to the memreg. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: implement mmc_get_env_devPeng Fan
Implement mmc_get_env_dev for i.MX8. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add boot device detectionPeng Fan
Add get_boot_device to detect boot device. Add print_bootinfo to print the boot device info. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add basic cpu supportPeng Fan
Add basic cpu support, including cpu revision, cpu type, cpu core detection. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22armv8: add cpu core helper functionsPeng Fan
Add helper functions to identify different armv8 variants. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx: add i.MX8 cpu typePeng Fan
Add i.MX8 cpu type and is_imx8/is_imx8qxp help macros. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP definedPeng Fan
Include i.MX8QXP pin header when CONFIG_IMX8QXP defined, if no SoC macro defined, report error. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add imx-regs header filePeng Fan
Add imx-regs header file to include the register base definition Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx: boot_mode: Add FLEXSPI boot entryPeng Fan
i.MX8 support FLEXSPI boot support. So add FLEXSPI boot entry. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22misc: imx8: add scfw api impementationPeng Fan
Add clk/misc/pad/pm/rm scfw api implementaion for different drivers to invoke. The low level code is using misc_call to invoke imx8_scu driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22arm: global_data: add scu_dev for i.MX8Peng Fan
Add scu_dev for i.MX8, this will be used as a handle to communite with SCU from A35. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22arm: build mach-imx for i.MX8Peng Fan
Build mach-imx for i.MX8 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx: add Kconfig entry for i.MX8QXPPeng Fan
Add Kconfig entry for i.MX8QXP Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add scfw macro definitionPeng Fan
Add SCFW macro definition. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-16arm: mx5: Add M53Menlo boardMarek Vasut
Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-16arm: mx5: Add LDB clock config codeMarek Vasut
Add code to configure PLL4, from which the LDB clock are directly derived. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-16arm: imx: mx5: Make videoskip available on MX5Marek Vasut
The board_video_skip() implementation in imx-common/video.c works on i.MX5x as well, so loosen the SoC filter in Makefile to make it available. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-09ARM: opos6ul: make the board boot againSébastien Szymanski
Commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl") removes the u-boot,dm-spl properties from the imx6ul.dtsi file and breaks the OPOS6UL board. Add the u-boot,dm-spl properties into *-u-boot.dts files to make the board boot again. Fixes: commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-10-09imx: mx7: fix potential overflow in imx_ddr_size()Marcel Ziswiler
The imx_ddr_size() function may overflow as it is possible to kind of over provision the DDR controller. Fix this by capping it to 2 GB which is the maximum allowed size as per reference manual. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-10-07Kconfig: sandbox: enable cmd_avb and dependenciesJens Wiklander
Enables cmd_avb and its dependencies need to run the AVB tests. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> [trini: Disable for sandbox_noblk] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-07sandbox: imply CONFIG_TEE (TEE uclass)Jens Wiklander
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07sandbox: dt: add sandbox_tee nodeJens Wiklander
Adds a sandbox_tee node to enable the sandbox tee driver in all the sandbox dts files. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07arm: dt: hikey: Add optee nodeJens Wiklander
Sync with 14e21cb8f811 ("arm64: dt: hikey: Add optee node" from Linux kernel. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-06mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7Patrice Chotard
This allows to boot all STM32F7 and STM32H7 boards independently of the amount of embedded SDRAM. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-10-06ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 TorpedoAdam Ford
With the device trees doing most of the work of pin-muxing and DM doing much of the peripheral initialization, this creates new defconfig files for each of the Logic PD variants with proper register settings/pin-muxing. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-06ARM: DTS: Add support for Logic PD OMAP35 Torpedo & SOM-LVAdam Ford
The baseboards and SOM's are virtually identical to their DM37 counterparts, but OMAP36/37 and OMAP3 have some minor register differences. With the boards being mostly driven by device trees now, this synchronizes their respective device trees with linux-omap for-next branch destined for 4.20 (or whatever the version after 4.19 will be called) Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06ARM: DTS: Remove unnecessary u-boot.dtsi options from omap3/36xxAdam Ford
With the introduction of the omap serial driver, the need for some of these U-Boot specific modifications is gone. This cleans up this unnneeded stuff. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with KernelAdam Ford
The device tree entries are from linux-omap's for-next branch destined to me put into 4.20 (or whatever the version is after 4.19) Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-05Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-10-05Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2018-10-05Merge tag 'rockchip-for-v2018.11-rc2' of git://git.denx.de/u-boot-rockchipTom Rini
Rockchip-focused changes for v2018.11-rc2: - fixes to rkimage for SPL boot via USB - fixes to make_fit_atf.py, incl. entry-point calculation and python3 compatibility - OP-TEE support for ARMv7-based SoCs - fixes to RGMII/GMII selection on the RK3328 Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-05arc: Add support for IoT development kitAlexey Brodkin
The DesignWare ARC IoT Development Kit is a versatile platform that includes the necessary hardware and software to accelerate software development and debugging of sensor fusion, voice recognition and face detection designs. More information is avaialble here [1] and here [2]. The board is based on real silicon with ARC EM9D-based Data Fusion IP Subsystem. It sports a rich set of I/O including * DW USB OTG * DW MobileStorage (used for micro SD-card) * GPIO * multiple serial interface including DW APB UART * ADC, PWM and eFlash, SRAM and SPI Flash memory * Real-Time Clock (RTC) * Bluetooth module with worldwide regulatory compliance (FCC, IC, CE, ETSI, TELEC) * On-board 9-axis sensor (gyro, accelerometer and compass) Extensible with Arduino, Pmod, mikroBUS connectors and a 2x18 extension header. One of the most interesting features for developers is built-in Digilent USB JTAG probe so only micro-USB cable is needed! [1] https://www.synopsys.com/dw/ipdir.php?ds=arc_iot_development_kit [2] https://www.synopsys.com/dw/doc.php/ds/cc/iot_dev_kit.pdf Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Implement print_cpuinfo()Alexey Brodkin
Once we enable DISPLAY_CPUINFO for ARC we'll see ARC core family and version printed on boot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Add model property to boards .dtsAlexey Brodkin
1. This way we sync with Linux kernel where we have model set for all ARC boards for quite some time, see [1] 2. Once we enable DISPLAY_BOARDINFO for ARC this info will be printed on boot givin some extra data-point about the board [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=618a9cd06dd471ac232f5b27325b24d26eba5571 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Don't pre-define CROSS_COMPILEAlexey Brodkin
Even though arc-linux- prefix is used in ARC prebuilt tools and in Buildroot there're other options like Linux distro cross-tools etc where prefix is different so let's not rely on this default. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-04rockchip: make_fit_atf: make python3 compatibleMian Yousaf Kaukab
Make script python3 compatible. No functional changes intended. Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: make_fit_atf: use elf entry pointMian Yousaf Kaukab
make_fit_atf.py uses physical address of first segment as the entry point to bl31. It is incorrect and causes following abort when bl31_entry() is called: U-Boot SPL board initTrying to boot from MMC1 "Synchronous Abort" handler, esr 0x02000000 elr: 0000000000000000 lr : 00000000ff8c7e8c x 0: 00000000ff8e0000 x 1: 0000000000000000 x 2: 0000000000000000 x 3: 00000000ff8e0180 x 4: 0000000000000000 x 5: 0000000000000000 x 6: 0000000000000030 x 7: 00000000ff8e0188 x 8: 00000000000001e0 x 9: 0000000000000000 x10: 000000000007fcdc x11: 00000000002881b8 x12: 00000000000001a2 x13: 0000000000000198 x14: 000000000007fdcc x15: 00000000002881b8 x16: 00000000003c0724 x17: 00000000003c0718 x18: 000000000007fe80 x19: 00000000ff8e0000 x20: 0000000000200000 x21: 00000000ff8e0000 x22: 0000000000000000 x23: 000000000007fe30 x24: 00000000ff8d1c3c x25: 00000000ff8d5000 x26: 00000000deadbeef x27: 00000000000004a0 x28: 000000000000009c x29: 000000000007fd90 Fix it by using the entry point from the elf header. Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: add fit source file for pack itb with op-teeKever Yang
We package U-Boot and OP-TEE into one itb file for SPL, so that we can support OP-TEE in SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: make_fit_atf: fix warning unit_address_vs_regKever Yang
Patch fix warning: /builddir/BUILD/u-boot-2018.05-rc2/"arch/arm/mach-rockchip/make_fit_atf.py" \ arch/arm/dts/rk3399-firefly.dtb > u-boot.its ./tools/mkimage -f u-boot.its -E u-boot.itb >/dev/null && cat /dev/null u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@2 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@3 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /configurations/config@1 has a unit name, but no reg property make[1]: Leaving directory '/builddir/BUILD/u-boot-2018.05-rc2/builds/firefly-rk3399' Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-03Merge tag 'rockchip-for-v2018.11' of git://git.denx.de/u-boot-rockchipTom Rini
Rockchip changes for 2018.11
2018-10-03arm: socfpga: stratix10: add sgmii in phymode setupOoi, Joyce
Additional sgmii phymode is added in socfpga_phymode_setup() along with a minor fix for maximum number of GMACs. Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
2018-10-03arm: socfpga: Remove unused function socfpga_emac_manage_reset()Ley Foon Tan
Remove code from the reset manager that is never called. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-10-03ARM: rmobile: Enable PHY framework on Gen3Marek Vasut
Enable PHY framework on Gen3, this is required for USB EHCI PHY support. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-03ARM: rmobile: Mark 4-64GiB as DRAM on Gen3Marek Vasut
Mark area 0x1_0000_0000 - 0x10_0000_0000 as DRAM on Gen3 as the chip is capable of addressing that and U-Boot can make use of it. This patch prevents exception when accessing those areas. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-03ARM: dts: rmobile: Reinstate missing i2c6 on PorterMarek Vasut
The I2C6 is used to communicate with the PMIC and it was removed during DT sync with Linux 4.17. Reinstate it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-03riscv: allow native compilationHeinrich Schuchardt
If environment variable CROSS_COMPILE is not set, this indicates native compilation. In this case we should not set an arbitrary value which is not applicable for 64bit anyway. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-03riscv: cosmetic: Reword do_reset() printf message.Rick Chen
The Sentence "reset unsupported yet" is not grammatically correct and should say "reset not supported yet" instead. Suggested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Signed-off-by: Rick Chen <rick@andestech.com>
2018-10-03riscv: Move do_reset() to a common placeBin Meng
We don't have a reset method on any RISC-V board yet. Instead of adding the same 'unsupported' message for each CPU variant it might make more sense to add a generic do_reset function for all CPU variants to lib/, similar to the one for ARM (arch/arm/lib/reset.c). Suggested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
generated by cgit (git 2.34.1) at 2024-12-29 19:23:54 +0000