summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-12-05rockchip: px30: Add support for using UART3 as debug UARTPaul Kocialkowski
Some generic PX30 SoMs found in the wild use UART3 as their debug output instead of UART2 (used for MMC) and UART5. Make it possible to use UART3 as early debug output, with the associated clock and pinmux configuration. Two sets of output pins are supported (M0/M1). Future users should also note that the pinmux default in the dts is to use the M1 pins while the Kconfig option takes M0 as a default. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
2019-12-05rockchip: px30: Rename CONFIG_DEBUG_UART2_CHANNEL to CONFIG_DEBUG_UART_CHANNELPaul Kocialkowski
UART3 also has two sets of pins that can be selected. Rename the config option to a common name, to allow it to be used for both UART2 and UART3. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: px30: Fixup PMUGRF registers layout orderPaul Kocialkowski
According to the PX30 TRM, the iomux registers come first, before the pull and strength control registers. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
2019-12-05rockchip: px5: enable spl-fifo-mode for emmc for px5-evbAndy Yan
We need load some parts of ATF to sram, but rockchip dwmmc controllers can't do dma to non-ddr addresses space, so set the mmc controller into fifo mode in spl. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: rk3308: enable spl-fifo-mode for emmcAndy Yan
We need load some parts of ATF to sram, but rockchip dwmmc controllers can't do dma to non-ddr addresses space, so set the mmc controller into fifo mode in spl. And show my best respect to Heiko's work for this solution. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05Fix typo in macros, "FIRMEWARE" -> "FIRMWARE"Thomas Hebb
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-04cmd: nand/sf: isolate legacy codeMiquel Raynal
The 'sf' command is not supposed to rely on the MTD stack, but both 'sf' and 'nand' commands use helpers located in mtd_uboot.c. Despite their location, these functions do not depend at all on the MTD stack. This file (drivers/mtd/mtd_uboot.c) is only compiled if CONFIG_MTD is selected, which is inconsistent with the current situation. Solve this by moving these three functions (which are only used by the above two commands) out of mtd_uboot.c and put them in a C file only compiled with cmd/sf.c and cmd/nand.c. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Don't export get_part function now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03ARM: MediaTek: add basic support for MT8518 boardsmingming lee
This adds a general board file based on MT8518 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8518 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com> [trini: Migrate env location to defconfig, set ENV_IS_IN_MMC] Signeed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03pinctrl: add driver for MT8518mingming lee
Add Pinctrl driver for MediaTek MT8518 SoC. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03ARM: MediaTek: Add support for MediaTek MT8518 SoCmingming lee
Add support for MediaTek MT8518 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03board: omapl138_lcdk: add the mmc device to SPLBartosz Golaszewski
We don't have full device-tree support in SPL yet - add an appropriate U_BOOT_DEVICE() to the board file. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03mmc: davinci: drop support for ti,dm6441-mmcBartosz Golaszewski
The DM family of DaVinci SoCs is no longer supported. Drop the irrelevant code from the driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03armv7m: cache: add invalidate_icache_all() stubGiulio Benetti
This commit: https://gitlab.denx.de/u-boot/u-boot/commit/d409c962169bd293e39386d0ddfa64d5222a3be4 causes build failure with ICACHE enabled. This is due to missing invalidate_icache_all() stub. Let's add empty invalidate_icache_all() in the case where ICACHE is not enabled. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2019-12-03cosmetic: Fix spelling and whitespace errorsThomas Hebb
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-02Merge branch '2019-12-02-master-imports'Tom Rini
- A large series of clean-ups to reduce common.h contents
2019-12-02common: Move trap_init() out of common.hSimon Glass
Move this function into the init.h header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move board_get_usable_ram_top() out of common.hSimon Glass
Move this function into init.h which seems to be designed for this sort of thing. Also update the header to declare struct global_data so that it can be included without global_data.h being needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move command functions out of common.hSimon Glass
Move these functions into the command.h header file which is a better fit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move enable/disable_interrupts out of common.hSimon Glass
Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move interrupt functions into a new headerSimon Glass
These functions do not use driver model but are fairly widely used in U-Boot. But it is not clear that they will use driver model anytime soon, so we don't want to label them as 'legacy'. Move them to a new irq_func.h header file. Avoid the name 'irq.h' since it is widely used in U-Boot already. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02arm: powerpc: Tidy up code style for interrupt functionsSimon Glass
Remove the unwanted space before the bracket. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move ARM cache operations out of common.hSimon Glass
These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Drop checkicache() and checkdcache()Simon Glass
These are used by only one arch and only within a single file. Drop the declarations from the common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02arm: powerpc: Tidy up code style for cache functionsSimon Glass
Remove the unwanted space before the bracket. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some SMP functions out of common.hSimon Glass
These functions belong in cpu_func.h so move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move checkcpu() out of common.hSimon Glass
This function belongs in cpu_func.h so move it over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some CPU functions out of common.hSimon Glass
These functions belong in cpu_func.h since they do not use driver model. Move them over. Don't bother adding comments since these functions should be deleted. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move mii_init() function out of common.hSimon Glass
This function belongs in mii.h so move it over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move get_ticks() function out of common.hSimon Glass
This function belongs in time.h so move it over and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02arm: pxa: Drop pxa_wait_ticks()Simon Glass
This function has a similar name to the common wait_ticks(). It is only used in one place and seems small enough to drop. Inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some time functions out of common.hSimon Glass
These functions belong in time.h so move them over and add comments. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move serial functions out of common.hSimon Glass
These functions belong in serial.h so move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Move strtomhz() to vsprintf.hSimon Glass
At present this function sits in its own file but it does not really justify it. There are similar string functions in vsprintf.h, so move it there. Also add the missing function comment. Use the vsprintf.h include file explicitly where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02status_led: Tidy up the code styleSimon Glass
There are a few whitespace problems with this code. Tidy them up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Drop CONFIG_SHOW_ACTIVITYSimon Glass
This feature is not enabled by any board. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-02common: Move older CPU functions to their own headerSimon Glass
These should be moved to driver model, but in the meantime, move them out of the common header to help reduce its size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: remove Micronas VCT boards
2019-11-29MIPS: remove Micronas VCT boardsDaniel Schwierzeck
The deadline for migration to CONFIG_DM is v2020.01. The VCT baords would need an almost complete rewrite of all drivers to support driver model. Unless someone has access to the hardware and volunteers to do the migration, the board should be scheduled for removal. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Stefan Roese <sr@denx.de>
2019-11-28Merge git://git.denx.de/u-boot-socfpgaTom Rini
- Assorted Gen5 fixes
2019-11-28Merge tag 'mmc-11-27-2019' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc - fsl_esdhc update and some cleanup in ls1021a/mpc83xx code - mmc tmio sdhi update for hs400
2019-11-28Merge tag 'u-boot-stm32-20191126' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Solve warning for stih410-b2260 - Device tree alignment on v5.4-rc4 for all stm32 boards - Correct the eMMC pin configuration on stm32mp157c-ev1 - Add DFU and SPI-NAND support for stm32mp1 board
2019-11-28Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- powerpc: Fix DM_MMC related build warnings by adding eSDHC device module support for T4240RDB, T2080RDB, T1042D4RDB, T1024RDB, P5040DS, P4080DS, P3041DS, P2041RDB, P2020RDB, P1020RDB platforms
2019-11-27mpc83xx: remove unused clock.hYangbo Lu
The clock.h was to define mxc_get_clock() providing clock value to fsl_esdhc driver. Since fsl_esdhc driver is using global data gd->arch.sdhc_clk directly now, we can remove this file. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27arm: drop eSDHC clock getting in mxc_get_clock() for layerscapeYangbo Lu
Although layerscape platforms reuse mxc_get_clock() of i.MX platforms, eSDHC clock getting do not have to use it. It uses global data gd->arch.sdhc_clk directly in fsl_esdhc driver. Even there are more than one eSDHC controllers on SoC, they use same reference clock. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-26ARM: dts: stm32: update eMMC configuration for stm32mp157c-ev1Patrick Delaunay
Update the sdmmc2 node for eMMC support on eval board stm32mp157c-ev1. - update slew-rate for pin configuration - update "vqmmc-supply" - remove "st,sig-dir" - add mandatory "pinctrl-names" - add "mmc-ddr-3_3v" This patch solve the eMMC detection issue for command "mmc dev 1". Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26ARM: dts: stm32: DT alignment with kernel v5.4-rc4Patrick Delaunay
Device tree and binding alignment with kernel v5.4-rc4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2025-01-01 06:28:26 +0000