summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-06-18Merge tag 'ti-v2020.10-next' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next - DM conversion for OMAP4, OMAP5 platforms. - Other minor fixes for Nokia RX51, am33, am57, am654.
2020-06-16omap5: uevm: convert to device modelTero Kristo
Convert omap5 uevm board to device model. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap5: Copy device tree from linux 5.7.yTero Kristo
Copy all the device tree files required for omap5 uevm support from mainline Linux. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap4: sdp: convert to device modelPeter Ujfalusi
Convert omap4 sdp to device model. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap4: Copy device tree from Linux 5.7.y for SDP4430Peter Ujfalusi
Copy all device tree files required for omap4 sdp4430 support from mainline Linux. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap4: panda: convert to device modelTero Kristo
Convert omap4 panda to device model. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap4: Copy device tree from Linux 5.7.yTero Kristo
Copy all device tree files required for omap4 panda support from mainline Linux. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-13mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPLFaiz Abbas
Cleanup this driver to use dt in U-boot and static platdata in SPL. This requires the following steps: 1. Move all platdata assignment from probe() to ofdata_to_platdata(). This function is only called in U-boot. 2. Replicate all the platdata assignment being done in ofdata_to_platdata() in the omapl138 board file. This data is used in the SPL case where SPL_OF_CONTROL is not enabled. 3. Remove SPL_OF_CONTROL and related configs from omapl138_lcdk_defconfig This cleanup effectively reverts 3ef94715cc ('mmc: davinci: fix mmc boot in SPL') Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-11dm: uclass: don't assign aliased seq numbersMichael Walle
If there are aliases for an uclass, set the base for the "dynamically" allocated numbers next to the highest alias. Please note, that this might lead to holes in the sequences, depending on the device tree. For example if there is only an alias "ethernet1", the next device seq number would be 2. In particular this fixes a problem with boards which are using ethernet aliases but also might have network add-in cards like the E1000. If the board is started with the add-in card and depending on the order of the drivers, the E1000 might occupy the first ethernet device and mess up all the hardware addresses, because the devices are now shifted by one. Also adapt the test cases to the new handling and add test cases checking the holes in the seq numbers. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com> Tested-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Michal Simek <michal.simek@xilinx.com> [on zcu102-revA]
2020-06-11usb: provide a device tree node to USB devicesMichael Walle
It is possible to specify a device tree node for an USB device. This is useful if you have a static USB setup and want to use aliases which point to these nodes, like on the Raspberry Pi. The nodes are matched against their hub port number, the compatible strings are not matched for now. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-09Merge tag 'u-boot-imx-20200609' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.07 ----------------- - mx53: mx53menlo Convert to DM_ETH, fix fail boot - imx8mp_evk: fix boot issue - MX6, display5: fix environment - drop warnings (watchdog) for i.MX8mm i.mx8mp - enable bootaux for i.MX8M Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
2020-06-09Revert "imx: rom api: fix image offset computation"Stefano Babic
This reverts commit 1f63ee656698724bcdc4e711b4ccd267f6bf64ab. As reported by Ye Li on ML: 1. Removing the image_offset will break secondary (redundant) boot support for sd and emmc. 2. When booting from emmc boot partition, the image_offset is 0. But the flash.bin generated by mkimage with imximage-8mp-lpddr4.cfg is for sd. It expects to be burn at 32KB offset. The fit offset 0x60000 has already included the 32KB offset. So when you burn this flash.bin to emmc boot partition at offset 0, the fit offset should subtract the 32KB (0x60000 - 0x8000). Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-06-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug fixes - Add TBI PHY access through MII - DDR: Rework errata workaround for A008109, A008378, 009942
2020-06-08ARM: dts: imx: m53menlo: Convert to DM_ETHMarek Vasut
Convert the board to DM_ETH instead of legacy networking. This requires a minor addition to the DT to satisfy the requirement for specifying a PHY node. No functional change from board user perspective. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2020-06-08ARM: imx: ddr: Add missing PHY resetMarek Vasut
The iMX7D RM 9.2.4.9.3 Power removal flow Table 9-11. Re-enabling power explicitly says both the DDR controller and the PHY must be reset in the correct sequence. Currently the code only resets the controller. This leads to a misbehavior where the system brings the DRAM up after reboot, but the DRAM is unstable. Add the missing reset. The easiest way to trigger this is by triggering WDT without having the WDT assert WDOG_B signal, i.e. mw.w 0x30280000 0x25 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2020-06-08imx: rom api: fix image offset computationSébastien Szymanski
When not booting from FlexSPI, the offset computation is: offset = image_offset + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000; When booting from SD card or eMMC user partition, image_offset is 0x8000. It is useless to add and remove 0x8000. When booting from other device, image_offset is 0 so this computation is wrong. Simplfy this computation to work on all booting devices. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2020-06-08imx: move ATF to the back of the FIT to fix loading over yModemPatrick Wildt
With yModem the FIT Image is only supplied once, so we can only seek forward in the yModem supplied image and never backwards. With the recent changes to the SPL mechanism, including loading U-Boot first, FDT after, then the loadables, we must also reorder the FIT image script to make sure that the loadables are last in the FIT image. Signed-off-by: Patrick Wildt <patrick@blueri.se> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2020-06-08imx: Kconfig: enable IMX_BOOTAUX for i.MX8MPeng Fan
i.MX8M could use imx bootaux to boot m4/m7 core, so let's add it to the dependency list. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-06-08ARM: dts: imxrt1050: indent lcdif node correctlyGiulio Benetti
Accidentally submitted a patch with indentation not correct, let's fix it by indenting wrong lines. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-06-07rockchip: puma: reorganize devicetrees to actually work and match upstreamHeiko Stuebner
So far the puma dts files only just included the main puma dtsi without handling the actual baseboard and rk3399-puma.dtsi was very much detached from the variant in the mainline Linux kernel. Recent changes resulted in a strange situation with nonworking puma boards. Commit ab800e5a6f28 ("arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi") moved the sdram include from rk3399-puma-ddrX.dts to new files rk3399-puma-ddrx-u-boot.dtsi which were never included anywhere though. Commit 167efc2c7a46 ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux") replaced the rk3399-puma.dtsi nearly completely, but in the kernel it definitly depends on a baseboard dts to actually enable peripherals like sd-slot, uarts, etc. So to untagle this and bring the whole thing more in line with mainline Linux, bring the rk3399-puma-haikou.dts over as well, drop the separate DDR-option devicetrees and instead replace them with a puma Kconfig option to select and include the needed DDR variant. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: puma: fix indentation for -u-boot.dtsiHeiko Stuebner
Tabs not spaces, so transform it to the common styling. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulatorHeiko Stuebner
The regulator enable-gpio uses opposite values for the declaration vs. the enable_active_low property, breaking the regulator enablement. Make the usbhost-supply work again by bringing them in sync again. This mimics the upstream Linux change found on: http://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2020-06-07arm64: dts: rk3399-puma: fix gpio levels for gmac reset pinHeiko Stuebner
The gmac reset has opposite values for the gpio declaration and the separate reset-active, bring this in line to make u-boot also find the ethernet-phy. This mimics the upstream Linux commit found on https://lore.kernel.org/r/20200603132836.362519-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: rockpro64: add SPI bootMarcin Juszkiewicz
U-Boot TPL 2020.07-rc3-00121-gab88251130 (Jun 03 2020 - 16:43:42) Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stride 256B stride lpddr4_set_rate: change freq to 400000000 mhz 0, 1 lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2020.07-rc3-00121-gab88251130 (Jun 03 2020 - 16:43:42 +0200) Trying to boot from SPI U-Boot 2020.07-rc3-00121-gab88251130 (Jun 03 2020 - 16:43:42 +0200) SoC: Rockchip rk3399 Reset cause: RST Model: Pine64 RockPro64 v2.1 DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from SPI Flash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial Out: vidconsole Err: vidconsole Model: Pine64 RockPro64 v2.1 Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 => Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07roc-rk3399-pc: Add SPI bootJagan Teki
U-Boot TPL 2020.07-rc3-00090-gd4e919f927-dirty (Jun 01 2020 - 23:45:53) Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride 256B stride lpddr4_set_rate: change freq to 400000000 mhz 0, 1 lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530) Trying to boot from MMC1 NOTICE: BL31: v2.2(release): NOTICE: BL31: Built : 15:05:37, May 12 2020 U-Boot 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530) SoC: Rockchip rk3399 Reset cause: POR Model: Firefly ROC-RK3399-PC Board DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from SPI Flash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Firefly ROC-RK3399-PC Board Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: rk3399-evb: add stdout-path for the boardKever Yang
The 'stdout-path' is missing after dts sync. Fixes: 167efc2c7a ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux") Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: rk3328: add rock-pi-e dts fileb.l.huang
The ROCK-PI-E is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53. Net - Dual ethernet port, 1 X Gbe, 1 X 100M USB - USB 3.0 DC - USB-Type C, 5V 2A Storage - TF card, eMMC Just build idbloader.img and u-boot.itb for Rockpi E board and follow the blow steps to replace the relevant partition. dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
2020-06-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Fixes 7e249bc13aaf: ("riscv: Move all SMP related SBI calls to SBI_v01") Move sbi_probe_extension() out of CONFIG_SBI_V01. - SiFive FU540 support SPL.
2020-06-04Merge tag 'u-boot-atmel-fixes-2020.07-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel fixes for 2020.07 cycle This set includes just two small commits that fix a build warning and add a missing serial node.
2020-06-04ddr: Rework errata A008109, A008378, 009942 workaroundJaiprakash Singh
Move errata A008109, A008378, 009942 workaround implementation from compute_fsl_memctl_config_regs() to fsl_ddr_set_memctl_regs() and add register write after each workaround implementation. Signed-off-by: Jaiprakash Singh <Jaiprakash.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04ddr: fsl: Impl. Erratum A008109Joakim Tjernlund
Impl. erratum as descibed in errata doc. Enable A008109 for T1040 and T1024 Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan v3 to T1024RDBMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the T1024RDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan v3 for T102xMadalin Bucur
Add the QorIQ DPAA 1 Frame Manager v3 device tree nodes for the T102x SoCs. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan to P5040DSMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the P5040DS device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan for P5040Madalin Bucur
The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan to P3041DSMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the P3041DS device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan for P3041Madalin Bucur
The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan to P2041RDBMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the P2041RDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan for P2041Madalin Bucur
The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan interfaces to P4080DSMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager interfaces nodes in the P4080DS device tree. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan for P4080Madalin Bucur
The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan v3 device tree nodesMadalin Bucur
Add the QorIQ DPAA Frame Manager version 3 device tree nodes description. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ DPAA 1 FMan device tree nodesMadalin Bucur
Add the QorIQ DPAA Frame Manager device tree nodes description. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: add QorIQ GPIOsMadalin Bucur
Add the QorIQ GPIO device tree nodes description. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04powerpc: dts: QorIQ: Add node(s) for the platform PLLMadalin Bucur
Add the QorIQ clock control device nodes include files. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01Bin Meng
sbi_probe_extension() is an API defined in SBI v0.2, not v0.1. Fixes 7e249bc13aaf: ("riscv: Move all SMP related SBI calls to SBI_v01") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-06-04riscv: sbi: Remove sbi_spec_versionBin Meng
U-Boot defaults to use SBI v0.2. Howerver there is a global variable sbi_spec_version that stills refers to v0.1. Since it is not used anywhere, let's remove it. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-06-04riscv: sifive: fu540: add SPL configurationPragnesh Patel
Add a support for SPL which will boot from L2 LIM (0x0800_0000) and then SPL will boot U-Boot FIT image (OpenSBI FW_DYNAMIC + u-boot.bin) from MMC boot devices. SPL related code is leveraged from FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04riscv: cpu: fu540: Add support for cpu fu540Pragnesh Patel
Add SiFive fu540 cpu to support RISC-V arch Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linuxPragnesh Patel
This sync has changes required to use GPIO in U-Boot and U-Boot SPL. Sync dts from linux v5.7-rc2 commit: "riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS file" (sha1: 0a91330b2af9f71ceeeed483f92774182b58f6d9) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2024-12-30 20:43:25 +0000