summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2018-11-18mips: mt76xx: gardena-smart-gateway: Add LEDs to dtsStefan Roese
Add the available LEDs to the DTS file so that they can be used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Enable watchdog supportStefan Roese
This patch enables and starts the watchdog on the MT7620 platform. Currently the WD timeout is configured to 60 seconds. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> [fixed build error due to missing function prototype arch_misc_init] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Kconfig: Add ethernet and GPIO supportStefan Roese
Imply DM_ETH and DM_GPIO for ARCH_MT7620, as this platform now supports ethernet and GPIO as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Add watchdog DT node to mt7628a.dtsiStefan Roese
Add the watchdog DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Add GPIO DT nodes to mt7628a.dtsiStefan Roese
Add the GPIO DT nodes to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Add ethernet DT node to mt7628a.dtsiStefan Roese
Add the ethernet DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: lowlevel_init.S: Add missing memory controller reset in DDR initStefan Roese
This fixes an issue which has been noticed on the Gardena board, with the watchdog enabled, where the watdchdog reset (after a system hang) did result in reporting of 2.9 GiB and a hang after this. With this patch applied the memory controller is correctly reset and initialized again even after a watchdog reset. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-16armv7r: dts: am654: Add initial supportLokesh Vutla
Add R5 specific dts for am654-evm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: James Doublesin <doublesin@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-16arm: dts: k3: Sync dts from LinuxLokesh Vutla
Sync the k3-am654 specific dts files from Linux next with tag 20181019. This changes are in queue for Linux v4.20-rc1 Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-11-16armv7R: K3: am654: Add support for triggering ddr init from SPLLokesh Vutla
In SPL, DDR should be made available by the end of board_init_f() so that apis in board_init_r() can use ddr. Adding support for triggering DDR initialization from board_init_f(). Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-11-16armv7R: K3: am654: Add support to start ATF from R5 SPLLokesh Vutla
Considering the boot time requirements, Cortex-A core should be able to start immediately after SPL on R5. Add support for the same. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-11-16armv7R: K3: am654: Add support for generating build targetsLokesh Vutla
Update Makefiles to generate: - tiboot3.bin: Image format that can be processed by ROM. Below is the tiboot3.bin image format that is required by ROM: _______________________ | X509 | | Certificate | | ____________________ | | | | | | | u-boot-spl.bin | | | | | | | |___________________| | |_______________________| Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-16armv7R: K3: am654: Enable MPU regionsLokesh Vutla
Enable MPU regions for AM654 evm: - Region0: 0x00000000 - 0xFFFFFFFF: Device memory, not executable - Region1: 0x41c00000 - 0x42400000: Normal, executable, WB, Write alloc - Region2: 0x80000000 - 0xFFFFFFFF: Normal, executable, WB, Write alloc - region3-15: Disabled With this dcache can be enabled either in SPL or U-Boot. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-11-16ram: Introduce K3 AM654 DDR Sub System driverLokesh Vutla
K3 based AM654 devices has DDR memory subsystem that comprises Synopys DDR controller, Synopsis DDR phy and wrapper logic to intergrate these blocks into the device. This DDR subsystem provides an interface to external SDRAM devices. Adding support for the initialization of the external SDRAM devices by configuring the DDRSS registers and using the buitin PHY routines. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: James Doublesin <doublesin@ti.com>
2018-11-16arm: Make arch specific memcpy thumb-safe.Klaus Goger
The current arch implementation of memcpy cannot be called from thumb code, because it does not use bx instructions on return. This patch addresses that. Note, that this patch does not touch the hot loop of memcpy, so performance is not affected. Tested on MXS (arm926ejs) with and without thumb-mode enabled. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
2018-11-16test/py: test pinmux commandPatrice Chotard
Add pinmux test which test the following commands: - pinmux list - pinmux dev - pinmux status Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Mark some tests as sandbox-centric] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-16ARM: DTS: Resync am3517-evm.dts with Linux 4.19Adam Ford
Some minor changes have been made to the AM3517-evm and the underlying am3517.dtsi files. This patch re-sync's the DTS and DTSI files with Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-11-16bcm968580xref: add initial supportPhilippe Reynes
This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-11-16bcm6858: add initial supportPhilippe Reynes
This add the initial support of the broadcom bcm6858 SoC family, only the cpu, dram and uart are supported. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-11-16arm: at91: wdt: Convert watchdog driver to dm/dtPrasanthi Chellakumar
Convert the Watchdog driver for AT91SAM9x processors to support the driver model and device tree. Changes "CONFIG_AT91SAM9_WATCHDOG" to new "CONFIG_WDT_AT91" Kconfig option. Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
2018-11-16ARMv8: SError exception handling in PSCI exception vectorsChee Hong Ang
Allow platform vendors to handle SError interrupt exceptions from ARMv8 PSCI exception vectors by overriding this weak function 'plat_error_handler'. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2018-11-16ARMv8: Add EL3 exception handling for ARMv8's KconfigChee Hong Ang
Kconfig option to allow all External Abort and SError exception taken to EL3. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2018-11-16ARMv8: Enable all asynchronous abort exceptions taken to EL3Chee Hong Ang
Allow EL3 to handle all the External Abort and SError interrupt exception occur in all exception levels. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2018-11-16Merge tag 'pull-14nov18' of git://git.denx.de/u-boot-dmTom Rini
- virtio implementation and supporting patches - DM_FLAG_PRE_RELOC fixes - regmap improvements - minor buildman and sandbox things
2018-11-14Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-11-14cpu: sandbox: Add "u-boot, dm-pre-reloc" for all cpu nodesBin Meng
To support CONFIG_DISPLAY_CPUINFO, add "u-boot,dm-pre-reloc" for all cpu nodes in Sandbox test.dts. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2018-11-14cpu: Add DM_FLAG_PRE_RELOC flag to various cpu driversBin Meng
It turns out commit c0434407b595 broke some boards which have DM CPU driver with CONFIG_DISPLAY_CPUINFO option on. These boards just fail to boot when print_cpuinfo() is called during boot. Fixes: c0434407b595 ("board_f: Use static print_cpuinfo if CONFIG_CPU is active") Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2018-11-14sysreset: Remove DM_FLAG_PRE_RELOC flag in various driversBin Meng
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14arm: stm32mp: Remove DM_FLAG_PRE_RELOC flagBin Meng
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-11-14test: dm: virtio: Add test cases for virtio uclassBin Meng
Now that we have a sandbox virtio transport driver, add some test cases to test virtio uclass driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14arm: qemu: Add a Kconfig in the board directoryBin Meng
This adds a Kconfig file in the board directory, so that some board-specific options can be specified there. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14x86: Implement arch-specific io accessor routinesBin Meng
At present the generic io{read,write}{8,16,32} routines only support MMIO access. With architecture like x86 that has a separate IO space, these routines cannot be used to access I/O ports. Implement x86-specific version to support both PIO and MMIO access, so that drivers for multiple architectures can use these accessors without the need to know whether it's MMIO or PIO. These are ported from Linux kernel lib/iomap.c, with slight changes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14riscv: bootm: Add dm_remove_devices_flags() call to do_bootm_linux()Bin Meng
This adds a call to dm_remove_devices_flags() to do_bootm_linux() so that drivers that have one of the removal flags set (e.g. DM_FLAG_ACTIVE_DMA_REMOVE) in their driver struct, may do some last-stage cleanup before the OS is started. arm and x86 already did such, and we should do the same for riscv. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14mips: Implement {in, out}_{le, be}_{16, 32, 64} and {in, out}_8Mario Six
MIPS is the only architecture currently supported by U-Boot that does not implement any of the in/out register access functions. To have a interface that is useable across architectures, add the functions to the MIPS architecture (implemented using the __raw_write and __raw_read functions). Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14sandbox: Try to start the RAM buffer at a particular addressSimon Glass
Use a starting address of 256MB which should be available. This helps to make sandbox RAM buffers pointers more recognisable. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-14test: regmap: Increase size of syscon0 memoryMario Six
The upcoming changes to the regmap interface will contain a proper check for plausibility when reading/writing from/to a register map. To still have the current tests pass, increase the size of the memory region for the syscon0 device, since one of the tests reads and writes beyond this range. Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14test: dm: core: Add a test case for driver marked with DM_FLAG_PRE_RELOC flagBin Meng
Now that we fixed the pre-relocation driver binding for driver marked with DM_FLAG_PRE_RELOC flag, add a test case to cover that scenario. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14Merge branch 'next'Tom Rini
This brings in the u-boot-net PR from Joe.
2018-11-13sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCDIcenowy Zheng
DE2 SoCs can support LCDs up to 1080p (e.g. A64), and 3MHz step won't let PLL_VIDEO be high enough for them. Use 6MHz step for PLL_VIDEO when using DE2, to satisfy 1080p LCD. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-11-13board: allwinner: sun50i-h6: Add Orangepi Lite2 supportJagan Teki
OrangePi Lite2 is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - AP6356S Wifi/BT - USB 2.0, USB 3.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-13arm64: allwinner: h6: Add common orangepi nodes into dtsiJagan Teki
Based on the information from hardware schematics and orangepi vendor orangepi H6 boards, One Plus and Lite2 shares common nodes like axp805, uart, mmc0 etc. The common differences between them is - One Plus, has Ethernet - Lite2, has Wifi, USB3, CSI port. So, add common orangepi nodes into sun50i-h6-orangepi.dtsi so-that it case use on respective orangepi h6 board dts files. Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-13sunxi: DT: add support for PinebookVasily Khoruzhick
Pinebook is a laptop produced by Pine64, with USB-connected keyboard, USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP bridge from Analogix. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13sun50i: A64: add support for R_I2C controllerVasily Khoruzhick
Allwinner A64 has a I2C controller, which is in the R_ MMIO zone and has two groups of pinmuxes on PL bank, so it's called R_I2C. Add support for this I2C controller and the pinmux which doesn't conflict with RSB. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Vagrant Cascadian <vagrant@debian.org> Acked-by: Jagan Teki <jagan@openedev.com>
2018-11-13mmc: sunxi: add support for automatic delay calibrationVasily Khoruzhick
A64 and H6 support automatic delay calibration and Linux driver uses it instead of hardcoded delays. Add support for it to u-boot driver. Fixes eMMC instability on Pinebook Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Cc: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13sunxi: A64: Add Pine64-LTS boardAndre Przywara
The Pine64 LTS is an updated version of the Pine64, copying the technical updates from the SoPine platform: LPDDR3 DRAM, eMMC socket and soldered SPI flash chip, even the broken SD card detect pin has been copied. Consequently this leads to the .dts (copied from the kernel) just including the SoPine baseboard .dts, and the defconfig being almost identical. Nevertheless the boards deserves a separate config. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13sunxi: H3/H5: Update .dts filesAndre Przywara
Update the .dts/.dtsi files from the Linux sunxi/dt64-for-4.20 tree: commit 679294497be31596e1c9c61507746d72b6b05f26 Author: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz> Date: Wed Sep 26 19:48:24 2018 +0000 arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13sunxi: A64: Re-add syscon to DT nodeAndre Przywara
The sun50i-a64.dtsi changes introduced in Linux v4.19-rc1 changed the compatible name for the syscon controller, dropping the generic "syscon" fallback. Using this new DT node will make the Ethernet driver in every older kernel (or non-Linux kernels) fail to initialise the MAC device. To allow booting distribution kernels (from installer images via UEFI, for instance), re-add the syscon compatible string as a fallback. This works with both older and newer kernels. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13sunxi: A64: Update .dts/.dtsi filesAndre Przywara
Update the .dts/.dtsi file from the Linux sunxi/dt64-for-4.20 tree: commit 679294497be31596e1c9c61507746d72b6b05f26 Author: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz> Date: Wed Sep 26 19:48:24 2018 +0000 arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13sunxi: Imply fitImage supportMarek Vasut
Enable modern fitImage format on sunxi. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Tom Rini <trini@konsulko.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-12imx: mkimage: add size check to the u-boot.imx make targetMarcel Ziswiler
The make macro to check if the binary exceeds the board size limit is taken straight from the root Makefile. Without this and e.g. enabled EFI Vybrid fails booting as the regular size limit check does not take the final u-boot.imx binary size into account which is bigger due to alignment as well as IMX header stuff. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-04 11:12:25 +0000