summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-12-09arm: dts: armada-cp110-*dtsi: add xmdio nodesNevo Hed
Based on upstream-linux See https://github.com/torvalds/linux/commit/f66b2aff. However made the XSMI register window 0x16 (22) bytes per my reading of the functional spec. Similar commits in Marvels own repo bump it to 0x200 (512) bytes but I did not see the reasoning for that. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/4d932b4. Also added device-name attributes to prevent ambiguity in the `mdio` command. Signed-off-by: Nevo Hed <nhed+github@starry.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxidGrygorii Strashko
The AM654 SoC doesn't allow to disabling RGMII TX internal delay in CPSW2G MAC. Hence, change CPSW2G interface mode to "rgmii-rxid" - RGMII with internal RX delay provided by the PHY, the MAC will add an TX delay in this case. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09net: Always build the string_to_enetaddr() helperJoe Hershberger
Part of the env cleanup moved this out of the environment code and into the net code. However, this helper is sometimes needed even when the net stack isn't included. Move the helper to lib/net_utils.c like it's similarly-purposed string_to_ip(). Also rename the moved function to similar naming. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Ondrej Jirman <megous@megous.com>
2019-12-08x86: simplify ljmp to 32-bit codeMasahiro Yamada
You can directly specify the label as the operand for ljmp. This commit saves 4-byte code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fixed the gas warning] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-08x86: use data32 directive instead of macro for operand-size prefixMasahiro Yamada
This file defines 'a32' and 'o32' macros to avoid magic numbers of operand/address-size prefixing. GAS supports 'data32' and 'addr32' for that purpose. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-06Merge tag 'u-boot-rockchip-20191206' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rockchip pwm driver update to support all the SoCs - RK3308 GMAC and pinctrl support - More UART interface support on PX30 and pmugrf reg fix - Fixup on misc for eth_addr/serial# - Other updates on variant SoCs
2019-12-06arm: rockchip: rk3308: Initialize the iomux configurationDavid Wu
When we want to use plus pinctrl feature, we need to enable them at spl. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06pwm: rk_pwm: Make PWM driver to support all Rockchip SocsDavid Wu
This PWM driver can be used to support pwm functions for on all Rockchip Socs. The previous chips than RK3288 did not support polarity, and register layout was different from the RK3288 PWM. The RK3288 keep the current functions. RK3328 and the chips after it, which can support hardware lock, configure duty, period and polarity at next same period, to prevent the intermediate temporary state. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06dts: rk3308: Enable ethernet function supported for Firefly ROC_RK3308_CCDavid Wu
The Firefly ROC_RK3308_CC use ref_clock of input mode, and rmii pins of m1 group. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06arm: dts: Add mac node for rk3308 at dtsi levelDavid Wu
The rk3308 only support RMII mode, and if it is output clock mode, better to use ref_clk pin with drive strength 12ma. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: misc: protect serial# from getting overwrittenHeiko Stuebner
serial# is one of the vendor properties and thus protected from being overwritten if already set. If env_set is called anyway this result in some nasty warnings, so check for presence before trying that. In the same direction check for the presence of cpuid# and compare it to the actual hardware and emit a warning if they don't match. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: misc: don't fail if eth_addr already setHeiko Stuebner
rockchip_setup_macaddr() runs from an initcall, so returning an error code will make that initcall fail thus breaking the boot process. And if an ethernet address is already set this is definitly not a cause for that, so just return success in that case. Fixes: 04825384999f ("rockchip: rk3399: derive ethaddr from cpuid"); Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: px30: Add support for using UART3 as debug UARTPaul Kocialkowski
Some generic PX30 SoMs found in the wild use UART3 as their debug output instead of UART2 (used for MMC) and UART5. Make it possible to use UART3 as early debug output, with the associated clock and pinmux configuration. Two sets of output pins are supported (M0/M1). Future users should also note that the pinmux default in the dts is to use the M1 pins while the Kconfig option takes M0 as a default. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
2019-12-05rockchip: px30: Rename CONFIG_DEBUG_UART2_CHANNEL to CONFIG_DEBUG_UART_CHANNELPaul Kocialkowski
UART3 also has two sets of pins that can be selected. Rename the config option to a common name, to allow it to be used for both UART2 and UART3. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: px30: Fixup PMUGRF registers layout orderPaul Kocialkowski
According to the PX30 TRM, the iomux registers come first, before the pull and strength control registers. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
2019-12-05rockchip: px5: enable spl-fifo-mode for emmc for px5-evbAndy Yan
We need load some parts of ATF to sram, but rockchip dwmmc controllers can't do dma to non-ddr addresses space, so set the mmc controller into fifo mode in spl. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: rk3308: enable spl-fifo-mode for emmcAndy Yan
We need load some parts of ATF to sram, but rockchip dwmmc controllers can't do dma to non-ddr addresses space, so set the mmc controller into fifo mode in spl. And show my best respect to Heiko's work for this solution. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05Fix typo in macros, "FIRMEWARE" -> "FIRMWARE"Thomas Hebb
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-04cmd: nand/sf: isolate legacy codeMiquel Raynal
The 'sf' command is not supposed to rely on the MTD stack, but both 'sf' and 'nand' commands use helpers located in mtd_uboot.c. Despite their location, these functions do not depend at all on the MTD stack. This file (drivers/mtd/mtd_uboot.c) is only compiled if CONFIG_MTD is selected, which is inconsistent with the current situation. Solve this by moving these three functions (which are only used by the above two commands) out of mtd_uboot.c and put them in a C file only compiled with cmd/sf.c and cmd/nand.c. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Don't export get_part function now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03ARM: MediaTek: add basic support for MT8518 boardsmingming lee
This adds a general board file based on MT8518 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8518 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com> [trini: Migrate env location to defconfig, set ENV_IS_IN_MMC] Signeed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03pinctrl: add driver for MT8518mingming lee
Add Pinctrl driver for MediaTek MT8518 SoC. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03ARM: MediaTek: Add support for MediaTek MT8518 SoCmingming lee
Add support for MediaTek MT8518 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03board: omapl138_lcdk: add the mmc device to SPLBartosz Golaszewski
We don't have full device-tree support in SPL yet - add an appropriate U_BOOT_DEVICE() to the board file. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03mmc: davinci: drop support for ti,dm6441-mmcBartosz Golaszewski
The DM family of DaVinci SoCs is no longer supported. Drop the irrelevant code from the driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03armv7m: cache: add invalidate_icache_all() stubGiulio Benetti
This commit: https://gitlab.denx.de/u-boot/u-boot/commit/d409c962169bd293e39386d0ddfa64d5222a3be4 causes build failure with ICACHE enabled. This is due to missing invalidate_icache_all() stub. Let's add empty invalidate_icache_all() in the case where ICACHE is not enabled. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2019-12-03cosmetic: Fix spelling and whitespace errorsThomas Hebb
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-02Merge branch '2019-12-02-master-imports'Tom Rini
- A large series of clean-ups to reduce common.h contents
2019-12-02common: Move trap_init() out of common.hSimon Glass
Move this function into the init.h header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move board_get_usable_ram_top() out of common.hSimon Glass
Move this function into init.h which seems to be designed for this sort of thing. Also update the header to declare struct global_data so that it can be included without global_data.h being needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move command functions out of common.hSimon Glass
Move these functions into the command.h header file which is a better fit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move enable/disable_interrupts out of common.hSimon Glass
Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move interrupt functions into a new headerSimon Glass
These functions do not use driver model but are fairly widely used in U-Boot. But it is not clear that they will use driver model anytime soon, so we don't want to label them as 'legacy'. Move them to a new irq_func.h header file. Avoid the name 'irq.h' since it is widely used in U-Boot already. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02arm: powerpc: Tidy up code style for interrupt functionsSimon Glass
Remove the unwanted space before the bracket. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move ARM cache operations out of common.hSimon Glass
These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Drop checkicache() and checkdcache()Simon Glass
These are used by only one arch and only within a single file. Drop the declarations from the common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02arm: powerpc: Tidy up code style for cache functionsSimon Glass
Remove the unwanted space before the bracket. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some SMP functions out of common.hSimon Glass
These functions belong in cpu_func.h so move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move checkcpu() out of common.hSimon Glass
This function belongs in cpu_func.h so move it over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some CPU functions out of common.hSimon Glass
These functions belong in cpu_func.h since they do not use driver model. Move them over. Don't bother adding comments since these functions should be deleted. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move mii_init() function out of common.hSimon Glass
This function belongs in mii.h so move it over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move get_ticks() function out of common.hSimon Glass
This function belongs in time.h so move it over and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02arm: pxa: Drop pxa_wait_ticks()Simon Glass
This function has a similar name to the common wait_ticks(). It is only used in one place and seems small enough to drop. Inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some time functions out of common.hSimon Glass
These functions belong in time.h so move them over and add comments. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move serial functions out of common.hSimon Glass
These functions belong in serial.h so move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Move strtomhz() to vsprintf.hSimon Glass
At present this function sits in its own file but it does not really justify it. There are similar string functions in vsprintf.h, so move it there. Also add the missing function comment. Use the vsprintf.h include file explicitly where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02status_led: Tidy up the code styleSimon Glass
There are a few whitespace problems with this code. Tidy them up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>