summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-02-10Merge tag 'u-boot-imx-20200210' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx - Convert to DM: - bx50v3, mx53ppd, novena, mx6sabresd - Fixes for Xea Board - Toradex im8m Verdin - Cleanup (warp7, mx6sxsabresd) Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/648131788
2020-02-10riscv: Remove unnecessary instructionSean Anderson
The add instruction on risc-v can have any three sources and targets, so there is no need for an intermediate mov. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-10riscv: Add option to print registers on exceptionSean Anderson
When debugging, it can be helpful to see more information about an unhandled exception. This patch adds an option to view the registers at the time of the trap, similar to the linux output on a kernel panic. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-10riscv: Fix breakage caused by linker relaxationSean Anderson
Due to the two-instruction sequence needed to access arbitrary memory locations, the RISC-V linker aggressively optimises memory accesses and jumps at link-time. This is called "linker relaxation," and is discussed in this SiFive article <https://www.sifive.com/blog/all-aboard-part-3-linker-relaxation-in-riscv-toolchain>. One of the optimizations in place is to assume that the __global_pointer symbol is placed in the gp register. To quote the article: "...The magic __global_pointer$ symbol is defined to point 0x800 bytes past the start of the .sdata section. The 0x800 magic number allows signed 12-bit offsets from __global_pointer$ to address symbols at the start of the .sdata section. The linker assumes that if this symbol is defined, then the gp register contains that value, which it can then use to relax accesses to global symbols within that 12-bit range. The compiler treats the gp register as a constant so it doesn't need to be saved or restored, which means it is generally only written by _start, the ELF entry point." However, U-Boot instead keeps the global data pointer in gp. This causes memory accesses and jumps optimized to use the gp pointer to fail. To fix this problem, we undefine the __global_pointer symbol. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-02-09board: ge: bx50v3: override panelIan Ray
Override the panel compatible string for LCD in U-Boot. Include U-Boot device tree overrides in device-specific device trees so that the panel compatible string is used. Fixes: 8c26739859c6 ("board: ge: bx50v3: sync devicetrees from Linux") Signed-off-by: Ian Ray <ian.ray@ge.com>
2020-02-09board: ge: mx53ppd: enable DM_VIDEOIan Ray
Enable DM_VIDEO for mx53ppd. Enable DM_REGULATOR_FIXED and DM_PWM for the backlight. Remove unused MX53PPD_LCD_POWER. Remove old (incorrect) setup_iomux_lcd. Enable backlight via display enable handler. Use cls command to initiate display in HW agnostic manner. Modify `failbootcmd' to use lcdputs. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: mx53ppd: add i2c eeprom bootcount storageRobert Beckett
Add bootcount node, linking to i2c eeprom "bootcount" partitions for storage. Enable i2c eeprom bootcount backend storage. Enable bootcount command and use it for failbootcmd. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: bx50v3: add i2c eeprom bootcount storageRobert Beckett
Add bootcount node, linking to i2c eeprom "bootcount" partitions for storage. Enable i2c eeprom bootcount backend storage. Enable bootcount command and use it for failbootcmd. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: bx50v3, imx53ppd: use DM I2CRobert Beckett
Remove old (pre-DM) i2c setup code. Enable DM i2c. Convert common code to use DM rtc. Convert common code to read VPD from eeprom partition. Convert the generic i2c PMIC init code to use the new da9063 driver. mx53ppd only: Correct RTC compatible in device tree. Enable MXC DM i2c driver. Define CONFIG_SYS_MALLOC_F_LEN so that DM is available in pre-reloc. Make GPIO banks available during preloc, since initialisation is done in board_early_init_f(). Add gpio_request() calls to satisfy the DM_GPIO compatibility API. Remove unused power configuration. Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Signed-off-by: Ian Ray <ian.ray@ge.com>
2020-02-09board: ge: bx50v3, imx53ppd: add eeprom partitionsRobert Beckett
Add eeprom partitions to device tree. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09ARM: imx: novena: Enable DM ethernetMarek Vasut
Convert to DM ethernet to prevent board removal. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
2020-02-09ARM: imx: novena: Move defconfig bits to arch KconfigMarek Vasut
Just move the defconfig entries which are required into the Novena entry in arch Kconfig, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
2020-02-09mx7dsabre: Fix usbtog probe when use dfu or umsJoris Offouga
Before: => ums 0 mmc 0 UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1dacc00 usb dr_mode not found CTRL+C - Operation aborted => dfu 0 mmc 0 usb dr_mode not found After : => ums 0 mmc 0 UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1dacc00 => dfu 0 mmc 0 Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-02-09arm: dts: imx7s-warp7: Move u-boot specific node in u-boot.dtsiJoris Offouga
These nodes are not in upstream kernel, so move these in u-boot.dtsi Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-02-09arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental ↵Lukasz Majewski
disablement The 'enable-active-high' DTS property configures GPIO so it is active with HIGH state (by default it is low). The 'regulator-boot-on' property indicates that the regulator was enabled in the 'earlier' stage - i.e. bootloader/firmware. In the XEA case the 'fec-3v3' was configured (as a "wrapper" on GPIO0_0) in very early SPL code, so it shouldn't be modified at latter stages. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-02-09board: toradex: Add Verdin iMX8M Mini supportIgor Opaniuk
This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) Normal Boot Trying to boot from MMC1 NOTICE: Configuring TZASC380 NOTICE: RDC off NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty NOTICE: BL31: Built : 01:11:41, Jan 25 2020 NOTICE: sip svc init U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Reset cause: POR DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-09arm: dts: imx8mm-pinfunc: sync latest linux-next pin func headerMarcel Ziswiler
Synchronise with latest linux-next kernel pin func header file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-07board: presidio-asic: Add basic G3 engr. development board supportAlex Nemirovsky
Add basic Presidio G3 engineering board support Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07gpio: do not include <asm/arch/gpio.h> for Cortina CAxxxx SoCsJason Li
The Cortina CAxxxx GPIO driver maintains DM_GPIO support across different CPU ISA in the CAxxxx Soc Family; Not just ARM. Therefore, it is not desirable to split out and maintain separete gpio header file for each CPU architecture. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jason Li <jason.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07mpc8xx: Expose show_regs()Tom Rini
To match the other PowerPC platforms the function show_regs() must not be marked static but instead be an exposed global function. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Christophe Leroy <christophe.leroy@c-s.fr>
2020-02-07arm: dts: mediatek: add ethernet and sgmii dts node for mt7622MarkLee
This patch add eth and sgmii dts node for mt7622 to support ethernet Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
2020-02-07x86: coral: Add I2C and TPM device-tree definitionsSimon Glass
Add nodes to the device tree for Cr50 and other available I2C ports. Also enable the ACPI interrupt driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: Add support for ACPI general-purpose eventsSimon Glass
ACPI GPEs are used to signal interrupts from peripherals that are accessed via ACPI. In U-Boot these are modelled as interrupts using a separate interrupt controller. Configuration is via the device tree. Add a simple driver for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: irq: Add support for requesting interruptsSimon Glass
At present driver model supports the IRQ uclass but there is no way to request a particular interrupt for a driver. Add a mechanism, similar to clock and reset, to read the interrupts required by a device from the device tree and to request those interrupts. U-Boot itself does not have interrupt-driven handlers, so just provide a means to read and clear an interrupt. This can be useful to handle peripherals which must use an interrupt to determine when data is available, for example. Bring over the basic binding file as well, from Linux v5.4. Note that the older binding is not supported in U-Boot; the newer 'special form' must be used. Add a simple test of the new functionality. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: itss: Add of-platdata supportSimon Glass
Allow this driver to be used in TPL by setting up the interrupt type correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: Give each driver an IRQ typeSimon Glass
Add an IRQ type to each driver and use irq_first_device_type() to find and probe the correct one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: irq: Add support for interrupt controller typesSimon Glass
There can be different types of interrupt controllers in a system and some drivers may need to distinguish between these. In general this can be handled using the device tree by adding the interrupt information to device nodes. However on x86 devices we have interrupt controllers which are not tied to any particular device and not really used in U-Boot. These still need to be inited, so a convenient method is to give each controller a type and allow a particular controller type to be probed. Add support for this in sandbox along with a test. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: remove the new bland line at EOF of test/dm/irq.c] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: apl: Drop the I2C config in FSP-SSimon Glass
This config is not actually used here and in U-Boot it seems better to set this using the device tree for each individual controller. The monolithic config of the FSP-S is only necessary if the FSP is actually configuring something, but here it is not. The FSP-S does enable/disable the various I2C ports. It might be nice to handle this using the okay/disabled property of each port, but that can be considered later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: apl: Use the clock driverSimon Glass
Enable the Intel clock driver and modify coral's device tree to use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: Move P2SB from Apollo Lake to a more generic locationWolfgang Wallner
The Primary to Sideband Bridge (P2SB) is not specific to Apollo Lake, so move its driver to a common location within arch/x86. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-06Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Gen 5 and Watchdog fixes
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05sandbox: Support changing the LCD colour depthSimon Glass
Add a new device-tree property to control the colour depth. At present we support 16bpp and 32bpp. While we are here, update the code to use livetree. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05sandbox: sdl: Add an option to double the screen sizeSimon Glass
On high-DPI displays U-Boot's LCD window can look very small. Add a -K flag to expand it to make things easier to read, while still using the existing resolution internally. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05sandbox: sdl: Move to use SDL2Simon Glass
Sandbox currently uses SDL1.2. SDL2 has been around for quite a while and is widely supported. It has a number of useful features. It seems appropriate to move sandbox over. Update the code to use SDL2 instead of SDL1.2. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sandbox: sdl: Support waiting for audio to completeSimon Glass
At present when audio stops, any in-progress output is cut off. Fix this by waiting for output to finish. Also use booleans for the boolean variables. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sandbox: sdl: Improve error handlingSimon Glass
A few errors are not checked. Fix these and use my preferred spelling for init. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sandbox: Add comments to the sdl structSimon Glass
Add comments for each struct member. Drop frequency since it is not used. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sound: Add a new stop_play() methodSimon Glass
At present there is no positive indication that U-Boot has finished sending sound data. This means that it is not possible to power down an audio codec, for example. Add a new method that is called once all sound data has been sent. Add a new method for this, called when the sound_play() call is done. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sandbox: Add a new header for the system malloc()Simon Glass
Some files use U-Boot headers but still need to access the system malloc(). Allow this by creating a new asm/malloc.h which can be used so long as U-Boot's malloc.h has not been included. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sandbox: Ensure that long-options array is terminatedSimon Glass
The last member of this array is supposed to be all zeroes according to the getopt_long() man page. Fix the function to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sandbox: Drop os_realloc()Simon Glass
Due to recent changes this function is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sandbox: Drop use of special os_malloc() where possibleSimon Glass
Some sandbox files are not built with U-Boot headers, so with the renamed malloc functions there is now no need to use the special os_... allocation functions to access the system routines. Instead we can just call them directly. Update the affected files accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sandbox: Rename 'free' variableSimon Glass
This name conflicts with our desire to #define free() to something else on sandbox. Rename it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05sandbox: Sort the help optionsSimon Glass
At present options are presented in essentially random order. It is easier to browse them if they are sorted into alphabetical order. Adjust the help function to handle this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05cli: Make the sandbox board_run_command the defaultSean Anderson
If CONFIG_CMDLINE=n, common/cli.c calls board_run_command. This fails to link on most architectures. However, the sandbox architecture has an implementation which we can use. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-02-05dm: core: Add ofnode_get_chosen_prop()Simon Glass
Add a function to read a property from the chosen node, providing access to its length. Update ofnode_get_chosen_string() to make use of it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Rename ofnode_get_chosen_prop()Simon Glass
This function is actually intended to read a string rather than a property. All of its current callers use it that way. Also there is no way to return the length of the property from this function. Rename it to better indicate its purpose, using ofnode_read as the prefix since this matches most other functions. Also add some tests which are missing for these functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes on ls1012a, ls1021a, ls1028ardb platforms Integrate fspi for ls1028a, add DM-I2C support, update secure boot header offset
generated by cgit (git 2.34.1) at 2024-12-28 10:26:01 +0000