summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2018-12-10omap: detect the board after DM is availableJean-Jacques Hiblot
In order to use DM_I2C, we need to move the board detection after the early SPL initialization. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10dts: am43x: omap5: Add node for I2C in SPLJean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10am335x: Register the I2C controllers if DM_I2C is used.Jean-Jacques Hiblot
If DM_I2C is used , the I2C controllers must be registered as U_BOOT_DEVICE because OF_CONTROL is not used in the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10i2c: omap24xx_i2c: Use platdata to probe the deviceJean-Jacques Hiblot
This allows the driver to be used without OF_CONTROL. AM335x support DM_SPL but does not use SPL_OF_CONTROL. Enabling DM_I2C in SPL thus requires that the omap I2C can be passed platdata. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10i2c: omap24xx_i2c: Move away from SoC specific headers for reg offsetVignesh R
Move away from SoC specific headers to handle different register layout. Instead use driver data to get appropriate register layouts like in the kernel. While at it, perform some mostly cosmetic alignment/cleanup in the functions being updated. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-09Merge git://git.denx.de/u-boot-marvellTom Rini
- Sync DDR training with Marvell code for Armada 38x by Chris - Misc updates to Armada 38x Helios4 board by Aditya
2018-12-08arm: mvebu: helios4: Reset uSOM onboard phy during board initAditya Prayoga
Similar to Clearfog rev 2.1, GPIO 19 also used to reset onboard ethernet PHY. This patch depend on net: mvneta: Add GPIO configuration support [URL: https://patchwork.ozlabs.org/patch/1007736/] Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-08arm: mvebu: helios4: Enable SPI flash supportAditya Prayoga
Enable SPI flash support under U-Boot and SPL. The ENV size and offset, ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16 To create U-Boot image for SPI flash, user would need to replace * CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI * CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-08arm: mvebu: helios4: Enable I2C and IO ExpanderAditya Prayoga
Enable Marvell I2C driver and I2C IO expander. Set default bus to external I2C bus. Define I2C aliases in device tree so it can be recognized by the driver. Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-07Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- Various axp209 fixes - Fixes for OLinuXino-A20-Lime2 / OLinuXino-A20-Lime2-eMMC
2018-12-07sunxi: pmic_bus: Decrease boot time by not writing duplicate dataOlliver Schinagl
When we clear a pmic_bus bit, we do a read-modify-write operation. We waste some time however, by writing back the exact samea value that was already set in the chip. Let us thus only do the write in case data was changed. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-07arm: dts: am33xx: Sync dts with Linux 4.20.0Felix Brack
This patch synchronizes the am33xx SoC specific files with those from Linux 4.20.0. Hence all board maintainers of am33xx based boards are on the cc list. The main purpose of this patch is to prevent further diverging of the dts files from U-Boot and those from Linux. It aims to set the stage for the synchronization of board specific dts files. Example: I'm the maintainer of the PDU001 board: once this patch is applied successfully I will make changes to the board specific dts file in Linux only and then post a patch with a copy of this exact dts file to U-Boot. This will make U-Boot and Linux remain in sync. The stumbling block of https://patchwork.ozlabs.org/patch/943627 was removed by the patch https://patchwork.ozlabs.org/patch/962428 from Lokesh Vutla (many thanks!). This omap-serial driver allows using the Linux am33xx.dtsi file in U-Boot. Other changes to dts and dtsi files made by this patch are mainly to prevent _new_ warnings during the build process. Especially the warning at pinmux@800 stating 'unnecessary #address-cells/#size-cells without "ranges" or child "reg"' was not removed. This warning is a good example showing the benefit of the synchronization: if it needs to be fixed it will be fixed in Linux and ported back to U-Boot. Buildman reports all 46 am33xx SoC based boards to build fine, with warnings of course. Nevertheless this patch should be tested thoroughly on as many boards as possible to prevent any collateral damage. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07ARM: DTS: da850-evm: Re-sync da850-evm.dts from Linux 4.20Adam Ford
There has been some natural evolution of the device tree, so resync with 4.20 Signed-off-by: Adam Ford <aford173@gmail.com>
2018-12-07ARM: dts: da850-lcdk: Sync from Linux 4.20Adam Ford
Re-synce the device tree files from Linux 4.20 Signed-off-by: Adam Ford <aford173@gmail.com>
2018-12-07ARM: DTS: da850: Sync from Linux 4.20Adam Ford
Re-sync with 4.20 due some some natural evolution. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-12-07ARM: DTS: Resync LogicPD-Torpedo-37xx-devkit with Linux 4.20Adam Ford
Migrate some small device tree fixes from Linux 4.20. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-12-07ARM: DTS: Resync LogicPD SOM-LV with Linux 4.20Adam Ford
There have been a few fixes to the device trees, so this re-syncs the dts/dtsi files with Linux Signed-off-by: Adam Ford <aford173@gmail.com>
2018-12-07ARM: DTS: Resync am3517-evm.dts with Linux 4.20Adam Ford
The DTS file for the AM3517 had the incorrect CD polarity. Resync with the fixed DTS file from Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-12-07gpio: stm32f7: Move STM32_GPIOS_PER_BANK into gpio.hPatrice Chotard
To allow access to this define by other driver, move it into gpio.h Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-07gpio: stm32f7: Add gpio bank holes managementPatrice Chotard
In some STM32 SoC packages, GPIO bank has not always 16 gpios. Several cases can occur, gpio hole can be located at the beginning, middle or end of the gpio bank or a combination of these 3 configurations. For that, gpio bindings offer the gpio-ranges DT property which described the gpio bank mapping. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-07serial: bcm6858: remove driver and switch to bcm6345Álvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-07arm: implement {in, out}_{16, 32} and {clr, set, clrset}bits_{16, 32}Álvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-07arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMCFelix Brack
This patch enables CONFIG_BLK as well as CONFIG_DM_MMC for the PDU001 board. It depends on Patrice Chotard's patch 'power: regulator: denied disable on always-on regulator' which prevents power cycling the vmmc supply. Without this patch the board will not boot as vmmc is unfortunately used by other board components, not just eMMC and micro SD card. Furthermore my patch 'dts: am335x-pdu001: Fix polarity of card detection input' is required to boot from external micro SD card. Without this patch no SD card will be detected and hence booting will fail. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07dts: am335x-pdu001: Fix polarity of card detection inputFelix Brack
When a micro SD card is inserted in the PDU001 card cage, the card detection switch is opened and the corresponding GPIO input is driven by a pull-up. Hence change the active level of the card detection input from low to high. Signed-off-by: Felix Brack <fb@ltec.ch>
2018-12-07test: dma: add dma-uclass testGrygorii Strashko
Add a sandbox DMA driver implementation (provider) and corresponding DM test. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-07ARM: at91: lds: add test for SPL binary size and bss sizeEugen.Hristev@microchip.com
Add test for the SPL binary size and the bss section size. This will throw an error at build time if the SPL sections do not fit in the designated RAM area, thus avoiding oversizing the SPL. Based on original work by Wenyou Yang. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-12-06pinctrl: stm32: make pinctrl use hwspinlockBenjamin Gaignard
Protect configuration registers with a hardware spinlock. If a hwspinlock is defined in the device-tree node used it to be sure that none of the others processors on the SoC could change the configuration at the same time. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06hwspinlock: add stm32 hardware spinlock supportBenjamin Gaignard
Implement hardware spinlock support for STM32MP1. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06dm: Add Hardware Spinlock classBenjamin Gaignard
This is uclass for Hardware Spinlocks. It implements two mandatory operations: lock and unlock and one optional relax operation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06rockchip: rk3399: Add Ficus EE board supportManivannan Sadhasivam
Add board support for Ficus EE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * Gigabit Ethernet * USB 2.0 * MMC Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> [Reworked based on common Rock960 family support] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add Rock960 CE board supportManivannan Sadhasivam
Add board support for Rock960 CE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * USB 2.0 * MMC This commit also adds DDR configuration for LPDDR3-2GiB-1600MHz which is being used on the board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add common Rock960 family from VamrsManivannan Sadhasivam
Rock960 is a family of boards based on Rockchip RK3399 SoC from Vamrs. It consists of Rock960 (Consumer Edition) and Ficus (Enterprise Edition) 96Boards. Below are some of the key differences between both Rock960 and Ficus boards: 1. Different host enable GPIO for USB 2. Different power and reset GPIO for PCI-E 3. No Ethernet port on Rock960 The common board support will be utilized by both boards. The device tree has been organized in such a way that only the properties which differ between both boards are placed in the board specific dts and the reset of the nodes are placed in common dtsi file. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [Added instructions for SD card boot] Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2018-12-06arm: dts: rockchip: add some common pin-settings to rk3399Randy Li
Those pins would be used by many boards. Commit grabbed from Linux: commit b41023282d07b61a53e2c9b9508912b1e7ce7b4f Author: Randy Li <ayaka@soulik.info> Date: Thu Jun 21 21:32:10 2018 +0800 arm64: dts: rockchip: add some common pin-settings to rk3399 Those pins would be used by many boards. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-05Merge tag 'dm-pull-5dec18' of git://git.denx.de/u-boot-dmTom Rini
Minor sandbox enhancements / fixes tpm improvements to clear up v1/v2 support buildman toolchain fixes New serial options to set/get config
2018-12-05Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- Various MTD fixes from Boris - Zap various unused / legacy paths. - pxa3xx NAND update from Miquel Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-05x86: acpi: Generate SPCR tableAndy Shevchenko
Microsoft specifies a SPCR (Serial Port Console Redirection Table) [1]. Let's provide it in U-Boot. [1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05x86: acpi: Add SPCR table descriptionAndy Shevchenko
Add SPCR table description as it provided in Linux kernel. Port subtype for ACPI_DBG2_SERIAL_PORT is used as an interface type in SPCR. Thus, provide a set of definitions to be utilized later. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-05dm: core: add functions to get/remap I/O addresses by nameÁlvaro Fernández Rojas
This functions allow us to get and remap I/O addresses by name, which is useful when there are multiple reg addresses indexed by reg-names property. This is needed in bmips dma/eth patch series, but can also be used on many other drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05sandbox: Use 'extras' to specify 'head' filesSimon Glass
At present sandbox has a start.o in the 'start' target but also includes it in the normal target list. This is not how this is normally handled. It is needed because sandbox does not include the u-boot-init variable in its link rule. Update the rule and move start.o from the normal target list to the 'extras' list. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05sandbox: Zero the ram buffer on startupSimon Glass
At present the RAM buffer is not inited unless it is read from a file, likely produced by an earlier phase of U-Boot. This causes valgrind warnings whenever the RAM buffer is used. Correct this by initing it if needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05sandbox: Check the filename in jump_to_image_no_args()Simon Glass
If the filename is NULL this function currently crashes. Update it to fail gracefully. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05sandbox: Fix up the debug message for the image filenameSimon Glass
This currently prints out the wrong filename. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05riscv: ax25-ae350: Pass dtb address to u-boot with a1 registerRick Chen
ax25-ae350 use CONFIG_OF_BOARD via a2 and CONFIG_SYS_SDRAM_BASE to boot from ram which allow the board to override the fdt address originally. But after this patch riscv: save hart ID and device tree passed by prior boot stage It provide prior_stage_fdt_address which offer a temporary memory address to keep the dtb address passing from loader(gdb) to u-boot with a1. So passing via a2 and CONFIG_SYS_SDRAM_BASE is redundant and can be removed. And it also somehow may corrupted BBL if it was be arranged in CONFIG_SYS_SDRAM_BASE. In board_fdt_blob_setup() When boting from ram: prior_stage_fdt_address will be use to reserved dtb temporarily. When booting from ROM: dtb will be pre-burned in CONFIG_SYS_FDT_BASE, if it is flash base. Or CONFIG_SYS_FDT_BASE maybe a memory map space (NOT RAM or ROM) which is provided by HW. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2018-12-05riscv: Add kconfig option to run U-Boot in S-modeAnup Patel
This patch adds kconfig option RISCV_SMODE to run U-Boot in S-mode. When this opition is enabled we use s<xyz> CSRs instead of m<xyz> CSRs. It is important to note that there is no equivalent S-mode CSR for misa and mhartid CSRs so we expect M-mode runtime firmware (BBL or equivalent) to emulate misa and mhartid CSR read. In-future, we will have more patches to avoid accessing misa and mhartid CSRs from S-mode. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-12-04ARM: rmobile: Set environment variable containing CPU typeMarek Vasut
Set environment variable 'platform' containing the CPU type. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-04ARM: rmobile: Enable MMC extensionsMarek Vasut
Enable extended MMC commands and GPT partition table support. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6Marek Vasut
Synchronize DTs with mainline Linux 4.19.6 , commit 96db90800c06d3fe3fa08eb6222fe201286bb778 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Sync Gen2 DTs with Linux 4.19.6Marek Vasut
Synchronize DTs with mainline Linux 4.19.6 , commit 96db90800c06d3fe3fa08eb6222fe201286bb778 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract i2c6 on M2W PorterMarek Vasut
The i2c6 node is missing in mainline Linux thus far, pull it into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SCIF2 node on E3 EbisuMarek Vasut
The SCIF2 node is not in Linux 4.17 DTs on E3, pull it into U-Boot specific DT extras until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
generated by cgit (git 2.34.1) at 2024-12-23 23:56:55 +0000