summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-01-23MSCC: Add board support for Serval SoC family.Horatiu Vultur
Add board support and configuration for Jaguar2 SoC family. The detection of the board type is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MSCC: Add device tree for Serval pcb106 boardHoratiu Vultur
Add device tree based on evaluation board pcb106. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: add device tree for Serval pcb105 boardHoratiu Vultur
Add device tree based on evaluation board pcb105. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: Add support for Serval SoC family.Horatiu Vultur
As Ocelot, Servalt, Luton and Jaguar2, this family of SoCs are found in Microsemi Switches solution. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MSCC: Add board support for Servalt SoC familyHoratiu Vultur
Add board support, configuration and DTS for Servalt SoC family. Currently there is one board in this family. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: Add support for Servalt SoC family.Horatiu Vultur
As Ocelot, Luton and Jaguar2, this family of SoCs are found in Microsemi Switches solution. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MIPS: mscc: ocelot: Add ethernet nodes for OcelotGregory CLEMENT
Import Ethernet related nodes from Linux Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-22nds32: dts: Fix mmc node compatible stringRick Chen
In the two commits: cf3922dddc44a968685b535f2af195f1e51f4a7b mmc: ftsdc010_mci: Sync compatible with DT mmc node c14e90e8445e7b1c3531b4bdeb778c47bd6570eb riscv: dts: Sync DT with Linux Kernel ftsdc010_mci's compatible has been modified as "andestech,atfsdc010" for RISC-V synchronization. But ae3xx.dts and ag101p.dts which are used for nds32 adp-ae3xx and adp-ag101p platforms did not be modified correctly at that time. It will cause mmc detection failure. Fix it here. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22nds32: Fix boot fail issue when build with elf-mculib.Rick Chen
Add -mcmodel=large can let elf-mculib have the same default behavior just like linux-glibc. And it help to pass U-Boot booting sequence. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22nds32: Generate SW fpu instruction.Rick Chen
Force it to generate SW fup instruction. It help to avoid bugs when running on no-HW-fpu board, but compile with v3f which support HW fpu instruction. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22nds32: Remove gcc unused optionRick Chen
-G0 is an old option, not support now, So remove it. It can help to fix compile error when build with nds32 pre-build toolchain. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-21Merge git://git.denx.de/u-boot-marvellTom Rini
- Sync Armada-38x dts with Linux 4.20 from Chris - Misc changes and enhancements to Turris Mox (v4) from Marek - Reserve PSCI area for Armada 8k from Heinrich - New Allied Telesis x530 board (Armada-385) from Chris - Misc minor changes (defconfig etc)
2019-01-21ARM: mvebu: add support for Allied Telesis x530Chris Packham
This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm64: dts: marvell: armada-ap806: reserve PSCI areaHeinrich Schuchardt
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any attempt to access it from U-Boot leads to an immediate crash. So let's make the same memory reservation as the vendor device tree. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Support 1 GB version of Turris MoxMarek Behún
Use get_ram_size to determine if the RAM size on Turris Mox is 512 MiB or 1 GiB. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: dts: Fix Turris Mox device treeMarek Behún
DTC issues a warning because #address-cells and #size-cells properties are not set in the mdio node. Also add ethernet1 alias. Also add RTC node. Also fix USB3 regulator startup delay time. Also fix PCI Express SERDES speed to 5 GHz (this is only cosmetic, the speed value is not used byt the comphy driver for PCI Express, but should be 5 GHz nonetheless). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Check and configure modulesMarek Behún
Check if Mox modules are connected in supported mode, then configure the MDIO addresses of switch modules. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21ARM: mvebu: sync Armada-38x dts with Linux 4.20Chris Packham
Sync the Armada-38x device tree files with Linux 4.20-rc5. The changes not taken are new compatible strings for the uart and nand flash controller. The nand binding is best updated if/when the mtd/nand infrastructure is updated. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21mpc83xx: Add support for -msingle-pic-baseJoakim Tjernlund
-msingle-pic-base is a new gcc(from 4.6) option for ppc and it reduces the size of my u-boot with about 4 KB. While at it, add -fno-jump-tables too to save a few more bytes. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Mario Six <mario.six@gdsys.cc> Tested-by: Mario Six <mario.six@gdsys.cc> (on MPC8308)
2019-01-19Kconfig: Migrate BOUNCE_BUFFERPhilipp Tomsich
The bounce buffer is used by a few drivers (most of the MMC drivers) to overcome limitations in their respective DMA implementation. This moves the configuration to Kconfig and makes it user-selectable (even though it will be a required feature to make those drivers work): the expected usage is for drivers depending on this to 'select' it unconditionally from their respective Kconfig (see follow-up patches). This commit includes a full migration using moveconfig.py to ensure that each commit compiles. To ensure bisectability we update dependencies of various drivers to now select BOUNCE_BUFFER when needed. [trini: Squash all patches to ensure bisectability] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion] Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion] Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2019-01-18Merge tag 'fsl-qoriq-for-v2019.04-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Add TFA boot flow for more boards Add TFA boot defconfig for ls1088a and ls2088a. Add dts fixup for PCIe endpoint and root complex.
2019-01-18arm: dts: am335x-pdu001: Sync with Linux 5.0-rc2Felix Brack
This patch synchronizes the PDU001 board DTS file with the one used by Linux 5.0-rc2. Signed-off-by: Felix Brack <fb@ltec.ch>
2019-01-18x86: Kconfig: spelling fixesChris Packham
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-18arm: Kconfig: spelling fixesChris Packham
Signed-off-by: Chris Packham <judge.packham@gmail.com>
2019-01-18mach-snapdragon: db410: pinctrl: fix pin countRamon Fried
Pin count in APQ8016 was wrong, fix that. Fixes: ad97051b7ff6 ("mach-snapdragon: Introduce pinctrl driver") Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-18dts: db410: fix indentationRamon Fried
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-17Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: mscc: various enhancements for Luton and Ocelot platforms - MIPS: mscc: added support for Jaguar2 platform - MIPS: optimised SPL linker script - MIPS: bcm6368: fix restart flow issues - MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards - MIPS: mt7688: small fixes and enhancements - mmc: compile-out write support if disabled
2019-01-17armv7: dts: ls1021a: Remove aliases property name warningRajesh Bhagat
Remove aliases property name warning while compilation: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: fsl-layerscape: properly configure qdma ICIDLaurentiu Tudor
The ICIDs for the qdma device are not configured through SCFG but through some registers found in the actual device register block. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1043a: correct the PCIe INTx fixupHou Zhiqiang
On LS1043A rev1.0 there are 4 interrupt pins for INTx, and on rev1.1 there is only 1 for INTx, so the current fixup is inverse of the fact. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1043a: add SVR definitions for 23x23 package siliconHou Zhiqiang
LS1043A/LS1023A 23x23 package silicon has different SVR:VAR_PER. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls2088ardb: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls2088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT - remove EL3 specific erratas for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1088ardb: Add TFABOOT supportPankit Garg
TFABOOT support includes: - ls1088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: fsl-layerscape: fixes for TFABOOT frameworkRajesh Bhagat
Fixes for TFABOOT framework - update eMMC bootsrc to SD_MMC - Increase buffer size for mcinitcmd from 256 to 512 - Fix mcinitcmd and bootcmd for Secure Boot Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-16arm: bootm: fix sp detection at end of address rangeSimon Goldschmidt
This fixes 'arch_lmb_reserve()' for ARM that tries to detect in which DRAM bank 'sp' is in. This code failed if a bank was at the end of physical address range (i.e. size + length overflowed to 0). To fix this, calculate 'bank_end' as 'size + length - 1' so that such banks end at 0xffffffff, not 0. Fixes: 15751403b6 ("ARM: bootm: don't assume sp is in DRAM bank 0") Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2019-01-16mips: mt7688: gardena-smart-gateway: Enable green power LED on startupStefan Roese
Set the correct power-up state (default-state) of the green power LED. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16MSCC: Add board support for Jaguar2 SOC familyHoratiu Vultur
Add board support and configuration for Jaguar2 SOC family. The detection of the board type in this family is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16MSCC: add device tree for Serval2 boardHoratiu Vultur
Add device tree based on evaluation board pcb112. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16MSCC: Add device tree for Jaguar2-48 boardHoratiu Vultur
Add device tree based on evaluation board pcb111. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16MSCC: Add device tree for Jaguar2 boardHoratiu Vultur
Add device tree based on evaluation board pcb110. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16MSCC: Add support for Jaguar2 SOC familyHoratiu Vultur
As the Ocelot and Luton SoCs, this family of SoCs are found in Microsemi Switches solution. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16mips: mscc: DT: Update luton device tree to use fast SPI driverLars Povlsen
Thes patch change the luton base device tree to use the newly added SPI bitbang driver. It also updates the "mscc_luton_defconfig" to use the new driver. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16mips: spi: mscc: Add fast bitbang SPI driverLars Povlsen
This patch add a new SPI driver for MSCC SOCs that does not sport the designware SPI hardware controller. Performance gain: 7.664 seconds vs. 17.633 for 1 Mbyte write. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16MIPS: jz47xx: remove custom u-boot-spl.ldsDaniel Schwierzeck
There is no real difference between the generic variant and the custom variant except that the generic variant is more optimised. This also saves 24 Bytes in the SPL binary. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
2019-01-16MIPS: optimize and fix ELF sectionsDaniel Schwierzeck
Discard ABI related sections which are not required for debugging. Rearrange debug sections similar to Linux. Remove the remaining explicitely specified sections in the unused part because those sections are not created anymore or because the linker puts them by default at the end of the ELF binary. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
2019-01-16mips: ocelot: DT: Enable use of serial gpioLars Povlsen
This enables the use of the MSCC serial GPIO driver on the MSCC VCoreIII 'ocelot' SOC, and add gpio-leds nodes to the pcb123 and pcb120 DT. Signed-off-by: Lars Povlsen <lars.povlsen@microsemi.com>
2019-01-16mips: luton: DT: Enable use of serial gpioLars Povlsen
This enables the use of the MSCC serial GPIO driver, and add gpio-leds nodes to the 'luton' pcb090 and pcb091 DT. Signed-off-by: Lars Povlsen <lars.povlsen@microsemi.com>
2019-01-16mips: mscc: luton+ocelot: Remove board config options, do probingLars Povlsen
As we are moving to multi-dtb and board detection, remove static board config options, and introduce board probing instead. Luton: This add single-binary support for the two MSCC luton-based reference boards - pcb090 and pcb091. The SoC chip ID is used to determine the board type. Ocelot: This add single-binary support for the two MSCC ocelot-based reference boards - pcb120 and pcb123. The PHY ids on specific ports are used to determine the board type. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: luton: DT: Add pcb090Lars Povlsen
This prepares individual device trees for MSCC luton-based reference boards - pcb090 and pcb091. Note: Even though the devices trees are quite common, they will differ significantly in coming patches. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: mscc: Add generic GPIO control utility functionLars Povlsen
The GPIO control function can be used for controlling alternate functions associated with a GPIO. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
generated by cgit (git 2.34.1) at 2024-12-30 21:18:24 +0000