summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2016-10-29ARM: uniphier: update DRAM init code for LD11 SoCMasahiro Yamada
Introduce run-time DDR PHY training. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: support DDR PHY parameter dump command for LD11Masahiro Yamada
Add the LD11 SoC data and adjuts the printf() format because this is a 64-bit SoC. Otherwise, 16-digits pointer addresses would break the log format. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: refactor DDR PHY parameter dump commandMasahiro Yamada
Do not hard-code the number of DX blocks because it is a different value for LD11 SoC. Move the macro NR_DATX8_PER_DDRPHY to ddrphy-training.c since it is the last user. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: rework existing DDR PHY code to reuse for LD11 SoCMasahiro Yamada
The DDR PHY register view of LD11 is slightly different from that of LD4/Pro4/sLD8, but it will be possible to share the register macros (and I want to re-use as much code as possible). Change the code in the more flexible form. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: do not run harmful code for USB boot mode of LD11 ES3Masahiro Yamada
The USB boot without the stand-by MPU is available on ES3 or later of LD11 SoC, but the code in this if-conditional block must not be run when booting from USB. Check if the boot device is USB, and skip the code in the case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: enable clocks to MIO/STDMAC on LD11 if USB is enabledMasahiro Yamada
At the moment, the clk driver is not clever enough to automatically enable parent clocks like Linux. Enable the STDMAC clock explicitly if USB is enabled. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: fix DRAM init poll address for LD4, Pro4, sLD8Masahiro Yamada
The status register should be polled. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: rename ddrphy-ld20-regs.h to ddruqphy-regs.hMasahiro Yamada
This PHY might be used for other SoCs in the future. Avoid including the SoC name in the header name. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: update DRAM init code for LD20 SoC (3rd)Masahiro Yamada
- Constify UMC setting data arrays - Merge data arrays *_d0 and *_d1. - Add PHY parameters for LD20 C1 board Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: remove unused board attribute macrosMasahiro Yamada
After SoC evaluation, they turned out unnecessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: enable SSC for more PLLs for LD20 SoCMasahiro Yamada
For Electro-Magnetic Compatibility. Set CPLL, SPLL2, MPLL, VPPLL, GPPLL, DPLL* to SSC rate 1 percent. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: remove unneeded mdelay() in PLL setting functionMasahiro Yamada
This delay is already cared by the callers of this function. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: adjust fdt_file environment handling to latest LinuxMasahiro Yamada
The environment fdt_file is useful to remember the appropriate DTB file name. Adjust it to the recent renaming in the upstream kernel. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-28Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini
2016-10-28ARM: at91/dt: sama5d2: Fix the warning from dtcWenyou Yang
Fix the warning from dtc like, ---8<---- Warning (unit_address_vs_reg): Node /ahb/apb/pmc@f0014000/periph64ck/sdmmc0_hclk has a reg or ranges property, but no unit name --->8---- Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-28arm, at91: add icache supportHeiko Schocher
add at least icache support for at91 based boards. This speeds up NOR flash access on an at91sam9g15 based board from 15.2 seconds reading 8 MiB from a SPI NOR flash to 5.7 seconds. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-10-28ARM: at91: clock: correct PRES offset for at91sam9x5Heiko Schocher
on at91sam9x5 PRES offset is 4 in the PMC master clock register. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Andreas Bießmann <andreas@biessmann.org>
2016-10-28arm: at91: mpddrc: add missing MPDDRC_MD definesHeiko Schocher
add missing MPDDRC_MD defines Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-10-28Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: common/Kconfig configs/dms-ba16_defconfig
2016-10-27drivers/pci/Kconfig: Add PCITom Rini
Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-27ddr: altera: Configuring SDRAM extra cycles timing parametersChin Liang See
To enable configuration of sdr.ctrlcfg.extratime1 register which enable extra clocks for read to write command timing. This is critical to ensure successful LPDDR2 interface Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-10-26arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/DualJagan Teki
i.CoreM6 Quad/Dual modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DQ, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: dts: imx6q: Add pinctrl definesJagan Teki
Add imx6q pinctrl defines support from Linux. Here is the last commit: "ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ" (sha1: d8c765e0d1ddbd5032c2491c82cc9660c2f0e7f2) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: dts: Add devicetree for i.MX6QJagan Teki
Add i.MX6Q dtsi support from Linux. Here is the last commit: "ARM: dts: add gpio-ranges property to iMX GPIO controllers" (sha1: bb728d662bed0fe91b152550e640cb3f6caa972c) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26engicam: icorem6: Add DM_GPIO, DM_MMC supportJagan Teki
Add DM_GPIO, DM_MMC support for u-boot and disable for SPL. Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/SoloJagan Teki
i.CoreM6 DualLite/Solo modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DL, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: dts: imx6dl: Add pinctrl definesJagan Teki
Add imx6dl pinctrl defines support from Linux. Here is the last commit: "ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ" (sha1: d8c765e0d1ddbd5032c2491c82cc9660c2f0e7f2) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: dts: Add devicetree for i.MX6DQLJagan Teki
Add i.MX6DQL dtsi support from Linux. Here is the last commit: "ARM: dts: imx6qdl: Fix SPDIF regression" (sha1: f065e9e4addd75c21bb976bb2558648bf4f61de6) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: dts: Add devicetree for i.MX6DLJagan Teki
Add i.MX6DL dtsi support from Linux. Here is the last commit: "ARM: dts: add gpio-ranges property to iMX GPIO controllers" (sha1: bb728d662bed0fe91b152550e640cb3f6caa972c) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial supportJagan Teki
Boot Log for i.CoreM6 DualLite/Solo Starter Kit: ----------------------------------------------- U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46) Trying to boot from MMC1 U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530) CPU: Freescale i.MX6SOLO rev1.3 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 31C Reset cause: POR DRAM: 256 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device switch to partitions #0, OK mmc0 is current device reading boot.scr ** Unable to read file boot.scr ** reading zImage 6741808 bytes read in 341 ms (18.9 MiB/s) Booting from mmc ... reading imx6dl-icore.dtb 30600 bytes read in 19 ms (1.5 MiB/s) Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a787 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 Boot Log for i.CoreM6 Quad/Dual Starter Kit: -------------------------------------------- U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46) Trying to boot from MMC1 U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530) CPU: Freescale i.MX6Q rev1.2 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 28C Reset cause: POR DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 icorem6qdl> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-24Fix codying style broken by recent libfdt syncMasahiro Yamada
Commit b02e4044ff8e ("libfdt: Bring in upstream stringlist functions") broke codying style in some places especially by inserting an extra whitespace before fdt_stringlist_count(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-24imx-common: compile plugin codePeng Fan
If CONFIG_USE_IMXIMG_PLUGIN is selected, plugin.bin will be generated under board/$(BOARDDIR)/. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-24imx-common: introduce USE_IMXIMG_PLUGIN KconfigPeng Fan
Introduce USE_IMXIMG_PLUGIN Kconfig Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-24imx: mx7: Add plugin supportPeng Fan
Add mx7_plugin.S which calls boot rom setup function, generate the second ivt, and jump back to boot rom. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-24imx: mx6: Add plugin supportPeng Fan
Add mx6_plugin.S which calls boot rom setup function, generate the second ivt, and jump back to boot rom. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Utkarsh Gupta <utkarsh.gupta@nxp.com>
2016-10-19Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2016-10-19 Highlights this time around: - Add run time service (power control) support for PSCI (fixed in v3) - Add efi gop pointer exposure - SMBIOS support for EFI (on ARM) - efi pool memory unmap support (needed for 4.8) - initial x86 efi payload support (fixed up in v2) - various bug fixes Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/tables_csum.h
2016-10-19efi_loader: Rename EFI_RUNTIME_{TEXT, DATA} to __efi_runtime{, _data}Alexander Graf
Compiler attributes are more commonly __foo style tags rather than big upper case eye sores like EFI_RUNTIME_TEXT. Simon Glass felt quite strongly about this, so this patch converts our existing defines over to more eye friendly ones. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19x86: efi: Add EFI loader support for x86Simon Glass
Add the required pieces to support the EFI loader on x86. Since U-Boot only builds for 32-bit on x86, only a 32-bit EFI application is supported. If a 64-bit kernel must be booted, U-Boot supports this directly using FIT (see doc/uImage.FIT/kernel.its). U-Boot can act as a payload for both 32-bit and 64-bit EFI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-19efi: Use asmlinkage for EFIAPISimon Glass
This is required for x86 and is also correct for ARM (since it is empty). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-19cpu: Add get_vendor callbackAlexander Graf
The CPU udevice already has a few callbacks to retreive information about the currently running CPUs. This patch adds a new get_vendor() call that returns the vendor of the main CPUs. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-19cpu: Add DMTF id and family fieldsAlexander Graf
For SMBIOS tables we need to know the CPU family as well as CPU IDs. This patches allocates some space for them in the cpu device and populates it on x86. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-19smbios: Allow compilation on 64bit systemsAlexander Graf
The SMBIOS generation code passes pointers as u32. That causes the compiler to warn on casts to pointers. This patch moves all address pointers to uintptr_t instead. Technically u32 would be enough for the current SMBIOS2 style tables, but we may want to extend the code to SMBIOS3 in the future which is 64bit address capable. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19x86: Move smbios generation into arch independent directoryAlexander Graf
We will need the SMBIOS generation function on ARM as well going forward, so let's move it into a non arch specific location. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19x86: Move table csum into separate fileAlexander Graf
We need the checksum function without all the other table functionality soon, so let's split it out into its own C file. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-19efi_loader: Add generic PSCI RTSAlexander Graf
Now that we have generic PSCI reset and shutdown support in place, we can advertise those as EFI Run Time Services, allowing efi applications and OSs to reset and shut down systems. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19arm: Provide common PSCI based reset handlerAlexander Graf
Most armv8 systems have PSCI support enabled in EL3, either through ARM Trusted Firmware or other firmware. On these systems, we do not need to implement system reset manually, but can instead rely on higher level firmware to deal with it. The exclude list seems excessive right now, but NXP is working on providing an in-tree PSCI implementation, so that all NXP systems can eventually use PSCI as well. Signed-off-by: Alexander Graf <agraf@suse.de> [agraf: fix meson] Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-18Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2016-10-18x86: Add implementations of setjmp() and longjmp()Simon Glass
Bring in these functions from Linux v4.4. They will be needed for EFI loader support. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-18x86: Move table csum into separate headerAlexander Graf
We need the checksum function without all the other table functionality soon, so let's split it out into its own header file. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-18arm: Add PSCI shutdown functionAlexander Graf
Using PSCI you can not only reset the system, you can also shut it down! This patch exposes a function to do exactly that to whatever code wants to make use of it. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-29 17:58:55 +0000