summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-10-23dm: serial: use Driver Model for UniPhier serial driverMasahiro Yamada
This commit converts UniPhier on-chip serial driver to driver model. Since UniPhier SoCs do not have Device Tree support, some board files should be added under arch/arm/cpu/armv7/uniphier/ph1-*/ directories. (Device Tree support for UniPhier platform is still under way.) Now the base address and master clock frequency are passed from platform data, so CONFIG_SYS_UNIPHIER_SERIAL_BASE* and CONFIG_SYS_UNIPHIER_UART_CLK should be removed. Tested on UniPhier PH1-LD4 ref board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: x86: Convert coreboot serial to use driver modelSimon Glass
This makes use of the existing device tree node to use driver model for the serial console. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: x86: dts: Add additional info to the serial port nodeSimon Glass
Add more information so that U-Boot can find the address of the serial port. Also fix the reg-shift value. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: x86: Add a gpio header for corebootSimon Glass
This code doesn't follow the normal approach of having its arch-specific definitions in an arch-specific directory. Add a new arch-specific file and make use of it. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: x86: Support pre-reloc malloc()Simon Glass
Add support for this by reserving a block of memory below global_data. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: x86: Zero global data before board_init_f()Simon Glass
To permit information to be passed from the early U-Boot code to board_init_f() we cannot zero the global_data in board_init_f(). Instead zero it in the start-up code. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: x86: Remove ebp assembler warning in zimage.cSimon Glass
This code generates warnings with recent gcc versions. We really don't need the clobber specification, so just drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: dts: Move omap device tree includes to correct placeSimon Glass
These ended up in arch/arm/dts/dt-bindings temporarily, but in fact the correct place is now include/dt-bindings. Move them to be consistent. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: omap3: Move to driver model for GPIO and serialSimon Glass
Adjust the configuration for the am33xx boards, including beagleboard, to use driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Tom Rini <trini@ti.com>
2014-10-23dm: am33xx: Provide platform data for serialSimon Glass
Provide suitable platform data for am33xx boards, so that these boards can use driver model for serial. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-23dm: am33xx: Provide platform data for GPIOsSimon Glass
Provide suitable platform data for am33xx boards, so that these boards can use driver model for GPIO access. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-23dm: omap: gpio: Support driver modelSimon Glass
Add driver model support to this driver, while retaining support for the legacy system. Driver model GPIO support is enabled with CONFIG_DM_GPIO as usual. Since gpio_is_valid() no longer exists, we can use the -EINVAL error returned from gpio_request(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-23dm: dts: omap: Select correct console for beagleboneSimon Glass
Select serial0 as the console. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Tom Rini <trini@ti.com>
2014-10-23Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2014-10-23mips: enable CONFIG_USE_PRIVATE_LIBGCC by defaultMasahiro Yamada
Without the private libgcc, we need a full multilib toolchain with different libgcc or multiple toolchains to build all BE/LE and hard-float/soft-float variants of MIPS boards. That is not feasible. This commit allows us to build all the MIPS boards with a single kernel.org toolchain: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/ x86_64-gcc-4.9.0-nolibc_mips-linux.tar.xz This change sounds reasonable for most users. If necessary, you can disable this option via "make menuconfig" or friends. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-10-23kconfig: move CONFIG_USE_PRIVATE_LIBGCC to KconfigMasahiro Yamada
The private libgcc is supported only on ARM, MIPS, PowerPC, SH, x86. Those architectures should "select" HAVE_PRIVATE_LIBGCC and CONFIG_USE_PRIVATE_LIBGCC should depend on it. Currently, this option is enabled on Tegra boards and x86 architecture. Move the definition from header files to Kconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
2014-10-23x86: set CONFIG_USE_PRIVATE_LIBGCC to yMasahiro Yamada
The motivation of this commit is to change CONFIG_USE_PRIVATE_LIBGCC to a boolean macro so we can move it to Kconfig. In the current implementation, there are two forms of syntax for this macro: - CONFIG_USE_PRIVATE_LIBGCC=y - CONFIG_USE_PRIVATE_LIBGCC=path/to/private/libgcc The latter is only used by x86 architecture. With a little bit refactoring, it can be converted to the former. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23arm: kirkwood: Remove some dead code from cpu.cStefan Roese
All those functions removed with this patch are not accessed at all. So lets remove them. Signed-off-by: Stefan Roese <sr@denx.de>
2014-10-23arm: armada-xp: Add basic support for the maxBCM boardStefan Roese
The maxBCM board is equipped with the Marvell Armada-XP MV78460 SoC. It integrates an SPI NOR flash and an Marvell 88E6185 switch. Signed-off-by: Stefan Roese <sr@denx.de>
2014-10-23arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP boardStefan Roese
This patch adds basic support for the Marvell DB-MV784MP-GP evaulation board. This is the first board that uses the recently created Armada XP 78460 SoC support. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org>
2014-10-23arm: armada-xp: Add basic support for Marvell Armada XP SoCStefan Roese
This basic support for the Marvell Armada XP is base on the existing kirkwood support. Which has been generatized by moving some common files into common marvell locations. This is in preparation for the upcoming Armada XP MV78460 support. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org>
2014-10-23arm: kirkwood: Change naming of dram functions from km_foo() to mvebu_foo()Stefan Roese
Additionally the SDRAM address decoding register address is not hard coded in the C code any more. A define is introduced for this base address. This makes is possible to use those gpio functions from other MVEBU SoC's as well. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASEStefan Roese
This makes is possible to use this SPI driver from other MVEBU SoC's as well. As the upcoming Armada XP support will do. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23arm: marvell: Extract kirkwood gpio functions into new common file gpio.cStefan Roese
This makes is possible to use those gpio functions from other MVEBU SoC's as well. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23arm: mvebu: Add common mbus functions to use on Marvell SoCsStefan Roese
These mbus functions are ported from Barebox. The Barebox version is ported from Linux. These functions will be first used by the upcoming Armada XP support. Later other Marvell SoC's will be adopted to use these functions as well (Kirkwood, Orion). Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org>
2014-10-23arm: marvell: Rework timer.c to make it usable for other MVEBU platformsStefan Roese
This patch does the following: - Rename defines and registers to not use kirkwood - Remove unused defines - Use clrsetbits() accessor functions - Coding style cleanup - Clear 25MHZ bit in timer controller register init for Armada XP There is no functional change for kirkwood. At least not intentionally. This will be used by the upcoming Armada XP support. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.hStefan Roese
This move makes it possible to use this kirkwood SPI driver from other MVEBU platforms as well. This will be used by the upcoming Armada XP support. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23arm: marvell: Move arch/kirkwood.h to arch/soc.hStefan Roese
This move makes is possible to use this header not only from kirkwood platforms but from all Marvell mvebu platforms. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23arm: kirkwood: Move some SoC files into new arch/arm/mvebu-commonStefan Roese
By moving some kirkwood files into a Marvell common directory, those files can be used by other Marvell platforms as well. The name mvebu is taken from the Linux kernel source tree. It has been chosen there to represent the SoC's from the Marvell EBU (Engineering Business Unit). Those SoC's currently are: Armada 370/375/XP, Dove, mv78xx0, Kirkwood, Orion5x This will be used by the upcoming Armada XP (MV78460) platform support. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23Merge git://git.denx.de/u-boot-x86Tom Rini
2014-10-22x86: Add device tree information for Chrome OS ECSimon Glass
Add the required node describing how to find the EC on link. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22Merge git://git.denx.de/u-boot-dmTom Rini
2014-10-22dm: rpi: Convert GPIO driver to driver modelSimon Glass
Convert the BCM2835 GPIO driver to use driver model, and switch over Raspberry Pi to use this, since it is the only board. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2014-10-22dm: imx: i2c: Use gpio_request() to request GPIOsSimon Glass
GPIOs should be requested before use. Without this, driver model will not permit the GPIO to be used. Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2014-10-22imx: Add error checking to setup_i2c()Simon Glass
Since this function can fail, check its return value. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
2014-10-22dm: tegra: spi: Convert to driver modelSimon Glass
This converts the Tegra SPI drivers to use driver model. This is tested on: - Tegra20 - trimslice - Tegra30 - beaver - Tegra124 - dalmore (not tested on Tegra124) Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: tegra: dts: Add aliases for spi on tegra30 boardsSimon Glass
All boards with a SPI interface have a suitable spi alias except the tegra30 boards. Add these missing aliases. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: sf: sandbox: Convert SPI flash driver to driver modelSimon Glass
Convert sandbox's spi flash emulation driver to use driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22exynos: universal_c210: Move to driver model soft_spiSimon Glass
Adjust this board to use the driver model soft_spi implementation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: exynos: Convert SPI to driver modelSimon Glass
Move the exynos SPI driver over to driver model. This removes quite a bit of boilerplate from the driver, although it adds some for driver model. A few device tree additions are needed to make the SPI flash available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: sandbox: spi: Move to driver modelSimon Glass
Adjust the sandbox SPI driver to support driver model and move sandbox over to driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22sandbox: dts: Add a SPI device and cros_ec deviceSimon Glass
Add a SPI device which can be used for testing SPI flash features in sandbox. Also add a cros_ec device since with driver model the Chrome OS EC emulation will not otherwise be available. Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: Mark exynos5 console as pre-relocSimon Glass
We will need the console before relocation, so mark it that way. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: gpio: Convert to driver modelSimon Glass
Convert the exynos GPIO driver to driver model. This implements the generic GPIO interface but not the extra Exynos-specific functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: Make sure that GPIOs are requestedSimon Glass
With driver model GPIOs must be requested before use. Make sure this is done correctly. (Note that the soft SPI part of universal is omitted, since this driver is about to be replaced with a driver-model-aware version) Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: Tidy up GPIO headersSimon Glass
The wrong header is being included, thus requiring the code to re-declare the generic GPIO interface in each GPIO header. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: Add pinctrl settings for s5p_goniSimon Glass
These describe the GPIOs in enough detail for U-Boot's GPIO driver to operate. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: Add pinctrl settings for smdkc100Simon Glass
These describe the GPIOs in enough detail for U-Boot's GPIO driver to operate. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: dts: Adjust device tree files for U-BootSimon Glass
The pinctrl bindings used by Linux are an incomplete description of the hardware. It is possible in most cases to determine the register address of each, but not in all cases. By adding an additional property we can fix this, and avoid adding a table to U-Boot for every single Exynos SOC. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: dts: Remove unused pinctrl information to save spaceSimon Glass
We don't include the pinctrl functions for U-Boot as they use up quite a bit of space and are not used. We could instead perhaps eliminate this material with fdtgrep, but so far this tool has not made it to upstream. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-02-05 09:37:12 +0000