summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-10-25Merge tag 'u-boot-atmel-2020.01-b' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel features and fixes for 2020.01 cycle This feature set includes Eugen's work on a new tiny flexcom driver and eeprom mac retrieval for the sam9x60-ek board.
2019-10-25Merge tag 'xilinx-for-v2020.01-part2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 part 2 common: - Fix manual relocation for repeatable commands arm: - Also clean up generated dtbos microblaze: - Add support for Manual relocation in crypto framework - Tune and align architecture bootm support zynq: - DT sync ups - Some defconfig updates - Remove empty board_early_init_f() zynqmp: - Clean firmware handing via drivers/firmware/ - DT/defconfig name alignments - DT cleanups with using firmware based clock driver - Some defconfig updates - Add IIO ina226 DT description - Tune zynqmp_psu_init_minimalize.sh script - Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216 versal: - Clean firmware handing via drivers/firmware/ - Add gpio support - Enable DT overlay/USB/CLK/FPGA - DT updates - Tune mini configuration spi: - gqspi - Remove unused headers
2019-10-24Merge branch '2019-10-24-UFS-support'Tom Rini
- Add Universal Flash Storage (UFS) support
2019-10-24microblaze: Fix tab indentation in start.SMichal Simek
Use tab instead of spaces. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24microblaze: Unify Linux bootm processMichal Simek
Record two bootstages and add "Starting kernel" message to have standard handoff message between U-Boot and OS. Also use debug() instead of #ifdef DEBUG to clean the code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24microblaze: Fix FDT message in boot_prep_linux()Michal Simek
There is no need to show FDT message in regular flow that's why switch it to debug level. Fixes: 0905046050b0 ("microblaze: Switch to generic bootm implementation") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for e-a2197-00 System ControllerMichal Simek
Add support for System Controller available on e-a2197-00 base board. System is very similar to p-a2197-00 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Remove unused board_early_init_f()Michal Simek
board_early_init_f added by commit e6cc3b25d721 ("arm: zynq: Wire watchdog internals") is no longer needed that's why remove it also with Kconfig enabling. Fixes: ccd063e9812a ("watchdog: Move watchdog_dev to data section (BSS may not be cleared)") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for zcu216Michal Simek
zcu104/6 defconfig was used as source. Standard features are enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for m-a2197-03Michal Simek
It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for m-a2197-02Michal Simek
It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: List lpd watchdog in dtsiMichal Simek
There are use cases where lpd watchdog can be configured for APU use. By design this IP should be listed in zynqmp.dtsi to make sure that node is properly enabled by DTG. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use power header in zynqmp.dtsiMichal Simek
Use power header and add power-domains property. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use reset header in zynqmp.dtsiMichal Simek
Wire reset-controller and use macros from reset header. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use backward compatible string for gemMichal Simek
Add backward compatible string for gem ("cdns,gem"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Switch to xlnx-zynqmp-clk headerMichal Simek
Use prepared header instead of hardcoded values. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Update nand device tree node propertiesNaga Sureshkumar Relli
This patch updates the nand device tree node properties as per updated driver. Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix DT style for ipi mailboxMichal Simek
Remove additional empty space. Fixes: 95497afada58 ("arm64: zynqmp: add firmware and mailbox node to DT") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: dt: Also clean dtbo filesMichal Simek
dtbo files can be also generated that's why also clean them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Fix sdhci node address for versal-mini-emmc1Michal Simek
Add missing trailing 0 to mach node name address with reg property. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Turn comment to gpio-line-namesMichal Simek
Label gpio lines properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on zcu102Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: dt: Add optional gpio phy reset propertiesHarini Katakam
Add gpio phy reset via I2C expander TCA6416 on board ZCU102. A warning call trace is observer in probe when this reset is called from context that can sleep. Keep this commented until that is resolved in phylib. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: dt: Add missing DP83867 quirkHarini Katakam
The DP83867 strap control workaround is already present in Linux kernel mainline binding. All these Xilinx boards require this quirk. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable fpd_dma for zcu104 platformsMichal Simek
Enable fpd_dma for these boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu104Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on zcu106Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix the si570 clock frequency on zcu111Venkatesh Yadav Abbarapu
The si570 clock frequency should be 156.25MHz as per datasheet. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on zcu111Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: dt: Delete no-1-8-v property from zcu102-rev1.0T Karthik Reddy
Currently zcu102 Rev1.0 board includes RevA sdhci dt node which has no-1-8-v property. Since Rev1.0 has level shifters delete this property to enable support for 1.8v. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Remove fixme about memory size on zynqmp-p-a2197Michal Simek
System controller has 2GB of memory and fixme can be removed now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Sync si570 setup and clock namesMichal Simek
Setup proper si570 names and default factory setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix m-a2197-01 DT based on latest schematicsMichal Simek
Remove some FIXMEs and align it with latest schematics. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Switch spi-flash to jedec,spi-nor on m-a2197Michal Simek
Mainline has done this switch and there is no reason not to switch it too. Mainline U-Boot patch which has done that switch: "dts: switch spi-flash to jedec, spi-nor compatible" (sha1: ffd4c7c2ecb745586239eb98d5dc0fe5e6ebe3bd) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on m-a2197-01Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on m-a2197-01Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix typo in zynqmp-p-a2197-00-revAMichal Simek
Trivial fix but not detected by checkpatch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Added new tps53679 compatible string for a2197-0x boardsNishant Mittal
Added tps53679 compatible string to tps53681. They are both compatible to each other and tps53679 has Linux driver already. Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix i2c address of u70 on p-a2197-00 boardNishant Mittal
tps53681 is i2c address 0x60 not 0xc0. Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on g-a2197-00Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on g-a2197-00Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use ethernet-phy as node name for ethernet physMichal Simek
Ethernet phys based on devicetree specification should be using ethernet-phy@ node name instead of pure phy@. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Sync names for SC with VersalMichal Simek
ZynqMP based System controller is present on Versal boards. This patch is aligning names with Versal to follow the spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Add missing pl353-smc nodeMichal Simek
DT binding was reviewed in Linux by commit b0b41af12a1b ("dt-bindings: memory: Add pl353 smc controller devicetree binding information") that's why this fragment can be also added to U-Boot repository. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Convert invoke_smc() to xilinx_pm_request()Michal Simek
Remove macros which use PM_SIP_SVC offset and convert invoke_smc() to xilinx_pm_request() which do calculation with PM_SIP_SVC already. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: xilinx: Move firmware functions from platform to driverMichal Simek
versal_pm_request() and invoke_smc() are almost the same. Only one difference is that versal_pm_request is adding PM_SIP_SVC offset to api_id. The patch is moving platform implementation to firmware driver code for synchronization. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
generated by cgit (git 2.34.1) at 2025-01-28 19:37:32 +0000