summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-08-09x86: slimbootloader: Add serial driverPark, Aiden
Slim Bootloader provides serial port info thru its HOB list pointer. All these HOBs are eligible for Slim Bootloader based board only. - Get serial port information from the serial port info HOB - Leverage ns16550 driver with slimbootloader specific platform data Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: slimbootloader: Add memory configurationPark, Aiden
Slim Bootloader provides memory map info thru its HOB list pointer. Configure memory size and relocation memory from the HOB data, and provide e820 entries as well. - Get memory size from the memory map info HOB - Set available top memory lower than 4GB for U-Boot relocation - Provide e820 entries from the memory map info HOB Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: Add a common HOB libraryPark, Aiden
FSP (CONFIG_HAVE_FSP) and Slim Bootloader (CONFIG_SYS_SLIMBOOTLOADER) consume HOB (CONFIG_USE_HOB) data from the each HOB list pointer. Add a common HOB library in lib/hob.c and include/asm/hob.h. Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: lib: fsp: Use EFI_GUID and efi_guid_tPark, Aiden
Use existing EFI_GUID and efi_guid_t instead of struct efi_guid. This is pre-work before making a common HOB library. - Change 'struct efi_guid' to efi_guit_t - Remove 'struct efi_guid' - Define GUIDs with EFI_GUID() macro - Use guidcmp() instead of compare_guid() - Remove compare_guid() Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested on MinnowMax Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: Add new slimbootloader CPU typePark, Aiden
This slimbootloader CPU type is to enable U-Boot as a payload which runs on top of Slim Bootloader (https://github.com/slimbootloader). The Slim Bootloader is designed with multi-stage architecture for the execution from reset vector to OS booting, and supports QEMU, Apollolake, Whiskeylake and Coffeelake platforms consuming Intel FSP (https://github.com/IntelFsp) for silicon initialization including CAR and memory initialization. The Slim Bootloader generates new HOB (Hand Off Block) which are serial port info, memory map info, performance data info and so on, and passes it to a Payload. U-Boot as a payload will use these HOB information for basic initialization such as serial console. As an initial commit, - Add CONFIG_SYS_SLIMBOOTLOADER to enable slimbootloader CPU type - Add new arch/x86/cpu/slimbootloader directory with minimum codes - Get hob_list pointer from Slim Bootloader Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: tangier: Populate CSRT for shared DMA controllerAndy Shevchenko
Intel Tangier has a shared DMA controller that, according to Microsoft spec, has to be presented in CSRT table. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: acpi: Enable ACPI companion for Intel iDMA 32-bitAndy Shevchenko
ACPI has a capability to specify DMA parameters for DMA channel consumers. To enable this for Intel Edison, describe GP DMA device in ACPI table in order to get an ACPI handle to it in OS. This works in conjunction with CSRT, which must be in align with DSDT. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: acpi: Introduce a stub to generate CSRTAndy Shevchenko
Here is a stub function that generates an empty CSRT. If the target platform provides acpi_fill_csrt() function, it will be used to populate the table. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: acpi: Add CSRT descriptionAndy Shevchenko
Add CSRT [1] description as it provided in Linux kernel. [1]: http://www.uefi.org/sites/default/files/resources/CSRT%20v2.pdf Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: edison: Enable SD slotAndy Shevchenko
Enable SD slot on Intel Edison platform. By default firmware doesn't put device on active state. Thus, we have to do this explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09Merge tag 'u-boot-rockchip-20190809' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add rk3399 boards Khadas Edge/-V/-Captain - Add fully souce code support for rk3328 including TPL/DRAM init - Enable boot from eMMC for rk3399 rock960/ficus boards - turn on the IO supply for dw_mmc
2019-08-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Remove unused bcm2835 watchdog driver (still non-DM) - Cosmetic fixup of mtk_wdt.c
2019-08-07ARM: dts: add hifsys reset for MediaTek SoCsRyder Lee
This adds missing hifsys reset parts in header files. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
2019-08-07arm: dts: change MT7629 to use spi-mem rather than qspiWeijie Gao
The original mtk_qspi driver has been removed. We change MT7629 to use newly added mtk-spimem driver. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-08-05rockchip: Kconfig: enable TPL support for rk3328Kever Yang
Enable TPL support and some related option in Kconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: dts: rk3328: update dmc node for driverKever Yang
Update dmc node for full feature driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/1e1495636574c78ea9d3af3e0aae95d5204612d6 with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: ram: add full feature rk3328 DRAM driverKever Yang
This driver supports DDR3/LPDDR3/DDR4 SDRAM initialization. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/9fb0777ec3cc6a89af9d2e0969c3bfe58306a88d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: dts: rk3328: Add rk3328-evb-u-boot.dtsiMatwey V. Kornilov
Split u-boot specific dts configuration to separate rk3328-evb-u-boot.dtsi Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm: dts: ficus: Enable booting from eMMC when using SPLManivannan Sadhasivam
This commits enables booting from eMMC when using SPL on 96Boards Ficus board by adding SDHCI to boot order. Since the SDHCI driver already has the reloc flag, this works straightaway. While we are at it, let's also include the common u-boot dtsi for rk3399. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm: dts: rock960: Enable booting from eMMC when using SPLManivannan Sadhasivam
This commits enables booting from eMMC when using SPL on 96Boards Rock960 board by adding SDHCI to boot order. Since the SDHCI driver already has the reloc flag, this works straightaway. While we are at it, let's also include the common u-boot dtsi for rk3399. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm64: dts: rockchip: Add support for Khadas Edge-CaptainNick Xie
Add devicetree support for Khadas Edge-Captain. Khadas Captain is the carrier board for Khadas Edge. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm64: dts: rockchip: Add support for Khadas Edge-VNick Xie
Add devicetree support for Khadas Edge-V. Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm64: dts: rockchip: Add support for Khadas EdgeNick Xie
Add devicetree support for Khadas Edge. Khadas Edge is an expandable Rockchip RK3399 board with goldfinger. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP - USB 3.0, 2.0 - USB Type C power and data - 16MB SPI Flash - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: rk3328: enable DMA for MMCs at Rock64Matwey V. Kornilov
DMA for MMCs can be enabled, since the previous patch fixes the following issue in SPL: Trying to boot from MMC1 spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: rk3328: set DDR as non-secure in SPLKever Yang
Set DDR as non-secure so that MMC DMA can access. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/bfe741ab9eb4f97371a4e6c24185419d57a3a75f and https://github.com/rockchip-linux/u-boot/commit/73d952acc8cc1ddad6652ba71895d9fe928c1e4b with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05watchdog: bcm2835_wdt: Remove unused BCM283x watchdog driver and its referencesStefan Roese
The BCM2835/2836 watchdog is not used in mainline U-Boot at all. This patch removes the driver and its references (CONFIG_BCM2835_WDT) completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Paolo Pisati <p.pisati@gmail.com>
2019-07-31Merge tag 'u-boot-amlogic-20190731' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync Amlogic G12A DT with linux 5.3-rc1 - add support for 4GiB DRAM memory - add support for Amlogic G12B based Odroid-N2 - small duplicate logic fix for gxbb clock driver
2019-07-31ARM: dts: da850-evm: Fix MDIO pinmuxAdam Ford
In attempts to speed up SPL and reduce size, the MDIO pin muxing was inadvertently affected. Since the ethernet driver will setup the pin muxing when ethernet is loaded, this patch will also pinmux the MDIO pins at the same time. Once an DM compatible MDIO driver is available, this can be removed. Fixes: 877ab2423bc2 ("ARM: davinci: da850: Manual pinmux only when PINCTRL not available") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-31arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains propertySuman Anna
The commit 355be915ed08 ("arm: dts: k3-am654: Update power-domains property for each node") has updated the power-domain cells value and updated power-domains property in various existing dts nodes but missed updating the cpsw_nuss node. This results in the following build warning, fix this. arch/arm/dts/k3-am654-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2 arch/arm/dts/k3-am654-r5-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2 Fixes: 355be915ed08 ("arm: dts: k3-am654: Update power-domains property for each node") Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-31omap: Correct the fastboot product varSam Protsenko
"fastboot flashall" expects "fastboot getvar product" value to be one of values provided in android-info.txt file (in AOSP), from "require board=" list. Before this patch, "am57xx" is returned for all AM57xx based boards, as it's set in $board env var from SYS_BOARD in board/ti/am57xx/Kconfig file, which is used for default implementation of "fastboot getvar product". In order to fix that inconsistency, let's do next: 1. In U-Boot: override fastboot.product, reusing the value from $board_name 2. In AOSP: provide values for all AM57xx boards we can use to device/ti/beagle_x15/board-info.txt file This way requirements check in "fastboot flashall" will work as expected, verifying that user tries to flash images to the board which those images were built for. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Andrew F. Davis <afd@ti.com>
2019-07-31ARM: meson-g12a: Handle 4GiB DRAM sizeNeil Armstrong
When configured with 4GiB DRAM size, only 3.8GiB is available, the I/O beeing mapped in the last 256MiB of the first 4GiB physical memory/ First fixup the mm_region to handle the first 3.8GiB as memory and the last 256MiB as I/O. Then limit the real memory reported by the firmware to the available physical space, 3.8GiB aligned with the mm_region memory zone size. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31ARM: dts: add support for Odroid-N2Neil Armstrong
Import HardKernel Odroid-N2 DT from Linux 5.3-rc1, commit 5f9e832c1370 ("Linus 5.3-rc1") based on an Amlogic G12B S922X SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1Neil Armstrong
Sync the Amlogic Meson G12A DT and Bindings file with the Linux 5.3-rc1 from the commit 5f9e832c1370 ("Linus 5.3-rc1"). Also remove the meson-g12a-u-boot.dtsi and meson-g12a-u200-u-boot.dtsi, now conflicting with the main DT content. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-30Merge tag 'xilinx-for-v2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2019.10 fpga: - Xilinx virtex2 cleanup - Altera cyclon2 cleanup zynq: - Minor Kconfig cleanup - Add psu_init configuration for Z-turn board zynqmp: - Add support for pmufw config passing to PMU - script for psu_init conversion - zcu1275 renaming xilinx: - Add support for UltraZed-EV SoM
2019-07-30Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2019-07-30arm64: zynqmp: add support for Avnet UltraZed-EV Starter KitLuca Ceresoli
Avnet UltraZed-EV Starter Kit is composed by the UltraZed-EV SoM and the only publicly-available compatible carrier card. The SoM is based on the EV version of the Xilinx ZynqMP SoC+FPGA. The psu_init_gpl.c file has been generated from the board definition files at [0] using Vivado 2018.3 and then minimized by tools/zynqmp_psu_init_minimize.sh. Manually removed serdes init code since it is not mentioned in device tree and fixed a checkpatch error. [0] https://github.com/Avnet/bdf/tree/3686c9ff7d2f0467fb4fcf39f861b8d6ff183b12/ultrazed_7ev_cc/1.1 Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: spl: install a PMU firmware config object at runtimeLuca Ceresoli
Optionally allow U-Boot to load a configuration object into the Power Management Unit (PMU) firmware on Xilinx ZynqMP. The configuration object is required by the PMU FW to enable most SoC peripherals. So far the only way to boot using U-Boot SPL was to hard-code the configuration object in the PMU firmware. Allow a different boot process, where the PMU FW is equal for any ZynqMP chip and its configuration is passed at runtime by U-Boot SPL. All the code for Inter-processor communication with the PMU is isolated in a new file (pmu_ipc.c). The code is inspired by the same feature as implemented in the Xilinx First Stage Bootloader (FSBL) and Arm Trusted Firmware: * https://github.com/Xilinx/embeddedsw/blob/fb647e6b4c00f5154eba52a88b948195b6f1dc2b/lib/sw_apps/zynqmp_fsbl/src/xfsbl_misc_drivers.c#L295 * https://github.com/ARM-software/arm-trusted-firmware/blob/c48d02bade88b07fa7f43aa44e5217f68e5d047f/plat/xilinx/zynqmp/pm_service/pm_api_sys.c#L357 SPL logs on the console before loading the configuration object: U-Boot SPL 2019.07-rc1-00511-gaec224515c87 (May 15 2019 - 08:43:41 +0200) Loading PMUFW cfg obj (2008 bytes) EL Level: EL3 ... Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: Rename zc1275 to zcu1275Michal Simek
Name of this platform has changed and released to customers that's why name has also changed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: uboot
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29arm: mach-keystone: Use appended original image size in image processingAndrew F. Davis
When an image is signed/encrypted on K2 devices the image may get padded to meet alignment requirements for the signature/encryption type. The original size is appended as 4 bytes little-endian to the end of the final image. Normally the trailing extra bytes are ignored and so restoring the exact original size is not important. In the case of initrd the original size is important as the kernel uses it to look for additional filesystem data and can do the wrong thing when the size is not correct. Read off the original size and report it back from the image post processing stage. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-29davinci: da850-evm: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-evm. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-07-29davinci: omapl138-lcdk: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-lcdk. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29nand: davinci: make davinci_nand_init() staticBartosz Golaszewski
This function is only used within the driver itself. No need to export it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29Merge branch '2019-07-29-master-imports'Tom Rini
- Assorted bug fixes
2019-07-29board: mediatek: Add pumpkin board supportFabien Parent
The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-29doc: arch: sandbox: Replace all the instances of README.sandboxKeerthy
commit 49116e6d236d ("doc: arch: Convert README.sandbox to reST") Moves README.sandbox to doc/arch. Replace all the existing instances to point to the right documentation file. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpgaTom Rini
- Various gen5 fixes
2019-07-29Merge tag 'video-for-2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - dcu and imx7 DM_VIDEO conversion - lb070wv8 compatible in simple_panel driver - bmp_logo improvements for DM_VIDEO - EDID updates to filter supported modes - meson_dw_hdmi: support EDID mode filtering - dw_hdmi: support ddc-i2c-bus phandle for external I2C masters - fix rpi crash when firmware doesn't report connected display
2019-07-29Merge tag 'u-boot-rockchip-20190729' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Clean up and migrate to use common rockchip spl board file - Clean up and migrate to use common rockchip board file - Increase rk3288 CONFIG_SYS_BOOTM_LEN to 16MB
2019-07-29rockchip: rv1108: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-28 21:55:38 +0000