summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-05-27x86: apl: Use devicetree for FSP-S configurationBernhard Messerklinger
A the moment the FSP-S configuration is a mix of hard coded values and devicetree properties. This patch makes FSP-S full configurable from devicetree by adding binding properties for all FSP-S parameters. Co-developed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> (Tested on coral) Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27x86: apl: Use devicetree for FSP-M configurationBernhard Messerklinger
A the moment the FSP-M configuration is a mix of hard coded values and devicetree properties. This patch makes FSP-M full configurable from devicetree by adding binding properties for all FSP-M parameters. Co-developed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> (Tested on coral) [sjg: Fix a build error for coral] Signed-off-by: Simon Glass <sjg@chromium.org> [bmeng: Add __maybe_unused to fsp_update_config_from_dtb()] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabledBernhard Messerklinger
Only load VBT if it's present in the u-boot.rom. Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> (Tested on coral) Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-26riscv: Move all SMP related SBI calls to SBI_v01Atish Patra
SMP support for S-mode U-Boot is enabled only if SBI_V01 is enabled. There is no point in supporting SMP related (IPI and fences) SBI calls when SBI_V02 is enabled. Modify all the SMP related SBI calls to be defined only for SBI_V01. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-25Merge tag 'ti-v2020.07-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Enable DM_ETH on omap3_logic board - Enable Caches in SPL for K3 platforms - Enable backup boot mode support for J721E - Update the DDR timings for AM654 EVM - Add automated tests for RX-51
2020-05-25sandbox: move compression option to KconfigMichael Walle
CONFIG_BZIP2 and CONFIG_GZIP_COMPRESSED are Kconfig options. Select them by CONFIG_SANDBOX instead of setting them in configs/sandbox.h. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25armv8: cache_v8: fix mmu_set_region_dcache_behaviourPeng Fan
The enum dcache_optoion contains a shift left 2 bits in the armv8 case already. The PMD_ATTRINDX(option) macro will perform a left shift of 2 bits. Perform a right shift so that in the end we get the correct value. [trini: Reword the commit message] Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-22Merge git://git.denx.de/u-boot-usbTom Rini
- DM support for OMAP - DWC3 fix - Typo fix in eth/r8152
2020-05-22Merge tag 'u-boot-rockchip-20200522' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3288 chromebook veyron support; - Add pcie driver support for rk3399; - other fixes for rk3399 boards
2020-05-22usb: ehci-omap: Add Support for DM_USB and OF_CONTROLAdam Ford
The omap3.dtsi file shows the usbhshost node with two sub-nodes for ohci and ehci. This patch file creates the usbhshost, and pulls the portX-mode information. It then locates the EHCI sub-node, and initializes the EHCI controller with the info pulled from the usbhshost node. There is still more to do since there isn't an actual link between the 'phys' reference and the corresponding phy driver, and there is no nop-xceiv driver yet. In the meantime, the older style reference to CONFIG_OMAP_EHCI_PHYx_RESET_GPIO is still needed to pull the phy out of reset until the phy driver is completed and the phandle reference is made. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-22rockchip: rk3328: rock64 - fix gen3 SPL hangKurt Miller
Use the same approach as ROC-RK3328-CC which enables SPL GPIO, pinctl and regulator support. This allows the gen3 board to boot through SPL and does not break gen2 in the process. Signed-off-by: Kurt Miller <kurt@intricatesoftware.com> Acked-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: spl-boot-order: do not attempt to access fdt if OF_PLATDATAUrja Rannikko
gd->fdt_blob is null if using OF_PLATDATA in SPL, which causes a hang after f0921f5098 ("fdt: Sync up to the latest libfdt"). We use the same test that is used in spl_common_init on whether to call fdtdec_setup to unconditionally avoid linking in the fdt-using code when not necessary and thus reduce SPL size. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: spl: veyron speedy boots from SPIUrja Rannikko
Apparently speedy was forgotten from this list of veyron devices. Fixes: 49105fb7ed ("rockchip: add common spl board file") Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2Jagan Teki
Enable PCIe/M.2 support on - NanoPC-T4 - ROC-RK3399-PC Mezzanine boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: rk3399: enable spl-fifo-mode for sdmmcDeepak Das
adapting commit fa2047c47310 ("rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc") for rk3399. Since mmc to sram can't do dma, add patch to prevent aborts transferring TF-A parts. Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-22ARM: uniphier: remove board_eth_init()Masahiro Yamada
This platform completely migrated to CONFIG_DM_ETH. board_eth_init() is only called from net/eth_legacy.c Remove the legacy hook. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22ARM: uniphier: delete or replace <common.h> includesMasahiro Yamada
<common.h> pulls in a lot of bloat. <common.h> is unneeded in most of places. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: drop #include <log.h> againMasahiro Yamada
I do not understand the changes made to these files by commit f7ae49fc4f36 ("common: Drop log.h from common header"). git show f7ae49fc4f36 -- arch/arm/mach-uniphier/ None of them uses the log function feature. Simply revert the changes made to these files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: drop #include <init.h> again from umc-pxs2.cMasahiro Yamada
I do not understand the change made to this file by commit 691d719db718 ("common: Drop init.h from common header"). git show 691d719db718 -- arch/arm/mach-uniphier/dram/umc-pxs2.c This file does not call or define any functions declared in <init.h> Simply revert the change made to this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: remove #include <net.h> again from micro-support-card.cMasahiro Yamada
I do not understand the changes made to this file by commit 90526e9fbac4 ("common: Drop net.h from common header"). git show 90526e9fbac4 -- arch/arm/mach-uniphier/micro-support-card.c The necessary declaration is already included by <netdev.h> at line 112. It also moved the <dm/of.h> inclusion, but I do not understand the motivation of doing so, either. Simply revert the changes made to this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22ARM: uniphier: include <asm/system.h> instead of <asm/cache.h> from psci.cMasahiro Yamada
I do not understand the change made to this file by commit 90526e9fbac4 ("common: Drop net.h from common header"). git show 90526e9fbac4 -- arch/arm/mach-uniphier/arm32/psci.c It added <asm/cache.h> while this file does not call the standard cache functions at all. All the uniphier-specific cache functions, uniphier_cache_*() are declared in cache-uniphier.h, which is already included from this file. Including <asm/system.h> is sensible to fix the -Wmissing-prototypes warnings because this file defines psci_cpu_on and psci_system_reset(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: select DM_ETHMasahiro Yamada
drivers/net/smc911x.c has been converted to DM. select DM_ETH to enable it for all the UniPhier platform boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-21Merge git://git.denx.de/u-boot-shTom Rini
- Enable -ffunction-sections / -fdata-sections --gc-sections to SH - RCar Gen3 updates
2020-05-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
2020-05-20sh: Enable ffunction-sections and fdata-sectionsMarek Vasut
Enable these two options to let compiler eliminate unused code. On R2Dplus, this results in considerable amount of saved space: text data bss dec hex filename - 266580 13196 39076 318852 4dd84 u-boot + 220214 12797 38745 271756 4258c u-boot Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20ARM: dts: rmobile: Enable eMMC DDR52 modes on Gen3 Salvator-X(S),ULCB,EbisuMarek Vasut
Enable DDR52 modes, since the SD core supports correct switching now. For completeness, list HS200 modes, however those were already enabled. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-05-20ARM: dts: rmobile: Reserve space in R-Car Gen3 DTsMarek Vasut
Reserve 4 kiB of space in R-Car Gen3 DTs when those DTs are compiled to permit patching in OpTee-OS /firmware node, /reserved-memory node and possibly also additional /memory@ nodes. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-19mpc83xx, abb: remove suvd3 boardHeiko Schocher
the mpc83xxx suvd3 variant is not longer used, so remove it. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19mpc83xx: remove redundant MPC83xx_RESET #defineRasmus Villemoes
This macro is only used (tested for existence) in mpc83xx.c, which unconditionally includes mpc83xx.h where it is unconditionally defined. Removing it makes the remaining code easier to read. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-05-19arm: mach-k3: Enable dcache in SPLJan Kiszka
Add support for enabling dcache already in SPL. It accelerates the boot and resolves the risk to run into unaligned 64-bit accesses. Based on original patch by Lokesh Vulta. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-05-19arm: mach-k3: j721e_init: Add support for backup boot modesAndreas Dannenberg
When the boot of J721E devices using the primary bootmode (configured via device pins) fails a boot using the configured backup bootmode is attempted. To take advantage of the backup boot mode feature go ahead and add support to the J721E init code to determine whether the ROM code performed the boot using the primary or backup boot mode, and if booted from the backup boot mode, decode the bootmode settings into the appropriate U-Boot mode accordingly so that the boot can proceed. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-05-19ARM: omap3_logic boards: Convert to DM_ETHAdam Ford
With the converstion of SMC911x to DM, this can facilitate the omap3 boards from LogicPD (now called Beacon EmbeddedWorks) to be converted. There isn't a clean solution to doing this in phases, so the boards are all being done together to avoid breaking functionality. Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs to show the address of the ethernet controller for each board. The board file, which is common betwen the OMAP35 and DM37 SOM LV and Torpedo boards, can remove the manual ethernet initialization, but it still needs to register the address and GPMC configuration for the Ethernet controller which is now being moved around to board_late_init(). Lastly, this patch updates the various config files to add the reference for DM_ETH and remove the SMC address, which is now fetched from the newly created device tree nodes. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-19ddr: k3-am654: EMIF Tool update to 2.02 for IO optimizations and fixesPraneeth Bajjuri
EMIF tool for AM65x [1] is now updated from rev 1.98 to 2.02 This update includes * Optimizations in IO configuration. * Fix for byte enablement in GCR registers. * Fixes for PG2.0 including ZQ control. [1]: http://www.ti.com/lit/zip/sprcah7 Acked-by: James Doublesin <doublesin@ti.com> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
2020-05-19arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT supportIoana Ciornei
Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2080a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds the necessary DPMAC nodes (DPMAC 1-8) for protocol 42 (0x2A) on SD#1. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT supportIoana Ciornei
Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2088a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds support for the on-board ports (DPMAC 1,2 and 4,5) found on the SERDES protocols 21(0x15) and 29(0x1d) for SD#1. On the LS1088AQDS board EMDIO1 is used with two onboard RGMII PHYs (Realtek RTL8211FD-CG), as well as 2 input/output connectors for mezzanine cards. Configuration signals from the Qixis FPGA control the routing of the external MDIOs. Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one of the 2 IO slots. As a consequence, a new node is added to describe register 0x54 as a MDIO mux controlled with child nodes describing all the IO slots as MDIO buses. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: lx2160aqds: add nodes describing possible mezzanine cardsIoana Ciornei
Add device trees describing possible uses of mezzanine cards depending on the SERDES protocol employed. This patch adds DPAA2 networking support for the following protocols on each SERDES block: * SD #1: 3, 7, 19, 20 * SD #2: 11 Each SERDES block has a different device tree file per protocol supported, where the IO SLOTs used are enabled and PHYs located on the mezzanine cards are described. Also, dpmac nodes are edited and their associated phy-connection-type and phy-handle are added. Top DTS files are also added for each combination of protocol on the 3 SERDES blocks. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: lx2160aqds: add MDIO slotsIoana Ciornei
The LX2160A processor has two external MDIO interfaces, described in the DTS as emdio1 and emdio2. On the LX2160AQDS board EMDIO1 is used with two onboard RGMII PHYs (Realtek RTL8211FD-CG), as well as eight input/output connectors for mezzanine cards. Configuration signals from the Qixis FPGA control the routing of the external MDIOs. Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one of the 8 IO slots. As a consequence, a new node is added to describe register 0x54 as a MDIO mux controlled with child nodes describing all the IO slots as MDIO buses. Also, DPMAC 17 and 18 are updated to reference the on-board PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: lx2160a: add noted for dpmacs 1, 2, 5-6Ioana Ciornei
Add nodes for DPMACs 1, 2 and 5-6 which were missing from the description. These will be later used on the LX2160AQDS specific DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19treewide: Update fsl qspi node dt properties as per spi-mem driverKuldeep Singh
According to new qspi driver, some properties like "bus-num, num-cs, big-endian" are no longer used. Device endiannes can be determined from device-type data in driver. Now use board specific compatibles, generic node names and specific labels to align with linux device-tree properties. Also consolidate spi-max-frequency to 50Mhz treewide. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19treewide: Remove unused FSL QSPI config options for Layerscape platformsKuldeep Singh
Some of these options are not used by the driver anymore and some of them are obsolete as the information is gathered from the dt. Also consolidating defines in common headers. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Use __ASSEMBLY__ as the assembly macrosSimon Glass
Some places use __ASSEMBLER__ instead which does not work since the Makefile does not define it. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Fix some checkpatch warnings in calls to udelay()Simon Glass
Fix up some incorrect code style in calls to functions in the linux/time.h header, mostly udelay(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/bug.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop asm_offsets.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop asm/ptrace.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Fix some checkpatch warnings in calls to debug()Simon Glass
Fix up some incorrect code style in calls to functions in the log.h header, mostly debug(). Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-31 23:54:54 +0000