summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-09-20ARM: OMAP5: Avoid writing into LDO SRAM bitsLokesh Vutla
Writing magic bits into LDO SRAM was suggested only for OMAP5432 ES1.0. Now these are no longer applicable. Moreover these bits should not be overwritten as they are loaded from EFUSE. So avoid writing into these registers. Boot tested on OMAP5432 ES2.0 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-09-20am335x:Handle worst case scenario for Errata 1.0.24Steve Kipisz
In Errata 1.0.24, if the board is running at OPP50 and has a warm reset, the boot ROM sets the frequencies for OPP100. This patch attempts to drop the frequencies back to OPP50 as soon as possible in the SPL. Then later the voltages and frequencies up set higher. Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> [trini: Adapt to current framework] Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20am335x_evm: am33xx_spl_board_init function and scale core frequencyTom Rini
Add a am33xx_spl_board_init (and enable the PMICs) that we may see, depending on the board we are running on. In all cases, we see if we can rely on the efuse_sma register to tell us the maximum speed. In the case of Beaglebone White, we need to make sure we are on AC power, and are on later than rev A1, and then we can ramp up to the PG1.0 maximum of 720Mhz. In the case of Beaglebone Black, we are either on PG2.0 that supports 1GHz or PG2.1. As PG2.0 may or may not have efuse_sma set, we cannot rely on this probe. In the case of the GP EVM, EVM SK and IDK we need to rely on the efuse_sma if we are on PG2.1, and the defaults for PG1.0/2.0. Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20am33xx: Add the efuse_sma CONTROL_MODULE registerTom Rini
Starting with PG2.1 we have a register in the CONTROL_MODULE that is set with the package type and maximum supported frequency. Add this, and the relevant mask/values. Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20am33xx: Add am33xx_spl_board_init function, callTom Rini
We need to allow for a further call-out in spl_board_init. Call this am33xx_spl_board_init and add a __weak version. This function may be used to scale the MPU frequency up, depending on board needs. Signed-off-by: Tom Rini <trini@ti.com>
2013-09-19ARM: s3c44b0: remove remainders of dead boardMasahiro Yamada
Because commit 5dc5f36 removed B2 board support, arch/arm/cpu/s3c44b0/* and arch/arm/include/asm/arch-s3c44b0/* are not necessary anymore. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Andrea Scian <andrea.scian@dave-tech.it>
2013-09-14arm: dma_alloc_coherent: malloc() -> memalign()Kuo-Jung Su
Even though the MMU/D-cache is off, some DMA engines still expect strict address alignment. For example, the incoming Faraday FTMAC110 & FTGMAC100 ethernet controllers expect the tx/rx descriptors should always be aligned to 16-bytes boundary. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-09-14arm: spl: Do not set the stack pointer twiceMasahiro Yamada
Because the stack pointer is already set in arch/arm/lib/crt0.S, we do not need to set it in arch/arm/lib/spl.c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-09-12Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-09-11Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD
Conflicts: tools/Makefile
2013-09-11arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.Przemyslaw Marczak
On s5pc1xx mmc devices offset is multiply of 0x100000, wrong value was 0x10000. Register offset always points to mmc 0 before this change. Add macro definition of mmc dev register offset to s5pc1xx and exynos mmc. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Jaehoon Chung <jh80.chung at samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-09-09Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
2013-09-09powerpc/mpc85xx: Fix the I2C bus speed error on p1022Tang Yuantian
The source clock frequency of I2C bus on p1022 is the platform(CCB) clock, not CCB/2. The wrong source clock frequency leads to wrong I2C bus speed setting. so, fixed it. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
2013-09-09SPL: P1022DS: switch to new multibus/multiadapter supportYing Zhang
- Added section "u_boot_list" in arch/powerpc/cpu/mpc85xx/u-boot-spl.lds - Use the function i2c_init_all instead of i2c_init Signed-off-by: Ying Zhang <b40530@freescale.com>
2013-09-06Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-09-06socfpga: Creating driver for Reset ManagerChin Liang See
Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit Signed-off-by: Chin Liang See <clsee@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2013-09-06nios2: fix missing comment terminator from SPDX License commitThomas Chou
The commit 1a4596601fd395f3afb8f82f3f840c5e00bdd57a Add GPL-2.0+ SPDX-License-Identifier to source files generated a warning due to a missing comment terminator. longlong.h:7:1: warning: "/*" within comment Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2013-09-05arm: lds: Remove libgcc eabi exception handling tablesMichal Simek
Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-09-05Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
Conflicts: drivers/serial/serial.c The conflict above was a trivial case of adding one init function in each branch, and manually resolved in merge.
2013-09-04Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-09-04Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-09-03Merge 'u-boot-microblaze/zynq' into (u-boot-arm/master'Albert ARIBAUD
Conflicts: arch/arm/include/asm/arch-zynq/hardware.h The conflict above was trivial and solved during merge.
2013-08-31i.MX6: Set and clear the gating bits for Phase Fractional DividersEric Nelson
This addresses silicon errata ERR006282 as described in this document: https://community.freescale.com/docs/DOC-94581 Also implemented in Freescale's 2009.08-based release: http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/ Commit id: b7c5badf94ffbe6cd0845efbb75e16e05e3af404 Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2013-08-31i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register declarationsEric Nelson
Some _CLKGATE_MASK and _FRAC_MASK macros were wrong for PFD_480 and the PFD_528 macros were missing. Fortunately, the incorrect macros weren't being used. Since both the PFD_480 and PFD_528 registers have the same structure, and the fields are identical for [0..3] in bytes [0..3], so a single set of macros will suffice. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-08-31i.MX6: Add convenience macros cpu_type(rev) and is_cpu_type(cpu)Eric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2013-08-31ARM: mxs: rename function that sets AUTO_RESTART flagHector Palacios
The AUTO_RESTART flag of HW_RTC_PERSISTENT0 register will power up the chip automatically 180ms after power down. This bit must be enabled by the boot loader to ensure the target can start upon hardware reset or watchdog reset even when powered from a battery. Currently the function named 'mxs_power_clear_auto_restart()' is setting this flag although the 'clear' in its name suggest the opposite. This patch renames the function to 'mxs_power_set_auto_restart()' and removes the comment about EVK revision A which was confusing because the function indeed was setting the flag. Signed-off-by: Hector Palacios <hector.palacios@digi.com>
2013-08-31ARM: mxs: tools: Add mkimage support for MXS bootstreamMarek Vasut
Add mkimage support for generating and verifying MXS bootstream. The implementation here is mostly a glue code between MXSSB v0.4 and mkimage, but the long-term goal is to rectify this and merge MXSSB with mkimage more tightly. Once this code is properly in U-Boot, MXSSB shall be deprecated in favor of mkimage-mxsimage support. Note that the mxsimage generator needs libcrypto from OpenSSL, I therefore enabled the libcrypto/libssl unconditionally. MXSSB: http://git.denx.de/?p=mxssb.git;a=summary The code is based on research presented at: http://www.rockbox.org/wiki/SbFileFormat Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br>
2013-08-31imx: add status reporting for HAB statusStefano Babic
Add functions to report the HAB (High Assurance Boot) status of e.g. i.MX6 CPUs. This is taken from git://git.freescale.com/imx/uboot-imx.git branch imx_v2009.08_3.0.35_4.0.0 cpu/arm_cortexa8/mx6/generic.c include/asm-arm/arch-mx6/mx6_secure.h Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-28arm, am335x: add watchdog supportHeiko Schocher
Add TI OMAP 16xx & 24xx/34xx 32KHz (non-secure) watchdog support. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2013-08-28arm, am335x: add some missing registers and defines for lcd and epwm supportHeiko Schocher
- add missing register defines in struct cm_perpl epwmss0clkctrl epwmss2clkctrl lcdcclkstctrl - add missing register defines in struct cm_dpll clklcdcpixelclk - add struct pwmss_regs - add struct pwmss_ecap_regs - add LCD Controller base LCD_CNTL_BASE - add PWM0 controller base PWMSS0_BASE Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
2013-08-28arm, am33xx: add defines for gmii_sel_register bitsHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
2013-08-28omap5: Expand CONFIG_SPL_MAX_SIZE and comment upon SRAM_SCRATCH_SPACE_ADDRTom Rini
After examining both TRMs and doing some experimentation, we can rely on using the start of the download area for CONFIG_SPL_TEXT_BASE and then move SRAM_SCRATCH_SPACE_ADDR up, just like am335x. This is required for peripheral boot modes such as UART. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28am33xx: Correct and expand comments on CONFIG_SPL_MAX_SIZETom Rini
We had been allowing the max size to be larger than actually allowed by the ROM. Expand the commentary here to explain why we set these locations. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28arm: omap3: fix SRAM copy and execution sequenceAlbert ARIBAUD
Fix size calculation in copy of go_to_speed into SRAM. Use SRAM_CLK_CODE in call to SRAM-based go_to_speed. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-08-28ARM: OMAP4470: Add Elpida EDB8164B3PF memory configurationLubomir Popov
OMAP4470 SDP SoM has EDB8164B3PF PoP memory on board. This memory has 4Gb x 2CS = 8Gb configuration. Add configuration for runtime calculation and precalculated cases. Patch is based on a draft Lubomir's patch [1]. [1] http://lists.denx.de/pipermail/u-boot/2013-April/150851.html Signed-off-by: Lubomir Popov <lpopov@mm-sol.com> [taras@ti.com: cleaned up patch and fixed precalculated values] Signed-off-by: Taras Kondratiuk <taras@ti.com>
2013-08-28ARM: OMAP4470: Add voltage and dpll dataTaras Kondratiuk
OMAP4470 reference design uses TWL6032 PMIC with a following connection scheme: VDD_CORE = TWL6032 SMPS2 VDD_MPU = TWL6032 SMPS1 VDD_IVA = TWL6032 SMPS5 Set voltage and frequency values according to OMAP4470 Data Manual Operating Condition Addendum v0.7 Signed-off-by: Taras Kondratiuk <taras@ti.com>
2013-08-28ARM: OMAP4470: Add OMAP4470 identificationTaras Kondratiuk
Signed-off-by: Taras Kondratiuk <taras@ti.com>
2013-08-26usb: ehci-mx5: Use 'bool' instead of 'unsigned char'Fabio Estevam
The 'enable' argument can be better expressed as boolean. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2013-08-26ARM: OMAP5: USB: Add OMAP5 common USB EHCI informationDan Murphy
* Enable the OMAP5 EHCI host clocks * Add OMAP5 EHCI register definitions * Add OMAP5 ES2 host revision Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-23arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12Piotr Wilczek
This patch fix wrong value returned by 's5p_gpio_part_max' function for Exynos4412. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-08-22arm: sama5d3: fix smc cs related registers offsetBo Shen
the smc cs related registers start at 0x600 and loop with 5 registers so the reserved register should be in at91_smc structure while no in at91_cs structure. So fix it Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22ARM: at91: sama5d3: remove unused definition about PMECC alpha table offsetWu, Josh
Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22ARM: at91: atmel_nand: pmecc driver will select the galois table by sector sizeWu, Josh
Define the galois index table offset in chip head file. So user do not need to set by himself. Driver will set it correctly according to sector_size. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> [rebased on master] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22arm: atmel: add gmac support for sama5d3xek boardBo Shen
add gmac support for sama5d3xek board, the gmac embedded in: - sama5d33, sama5d34, sama5d35 Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-21Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2013-08-21ARM: mxs: Added application UART driverAndreas Wass
The driver makes it possible to use an application UART as the U-Boot output console for Freescale i.MX23/i.MX28 devices. Signed-off-by: Andreas Wass <andreas.wass@dalelven.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2013-08-20Fix for incorrect conversion hex string to number (FMAN firmware address).Николай Пузанов
Signed-off-by: Николай Пузанов <punzik@gmail.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-20powerpc/sec: Add workaround for SEC A-003571Shengzhou Liu
Multiple read/write transactions initiated by security engine may cause system to hang. Workaround: set MCFGR[AXIPIPE] to 0 to avoid hang. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-20powerpc/t4240: add QSGMII interface supportShaohui Xie
Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-20powerpcv2: Print hardcoded size like print_size() doesShruti Kanetkar
Makes the startup output more consistent Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: York Sun <yorksun@freescale.com>
generated by cgit (git 2.34.1) at 2024-12-28 13:55:32 +0000