summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-09-19rockchip: spi-boot-order: Trival fix to newline missingJagan Teki
newline \n was missed in fdt_path_offset, error loop. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19rockchip: rk3288: vyasa: Drop ROCKCHIP_BROM_HELPER selectionJagan Teki
ROCKCHIP_BROM_HELPER is selected as if TPL/SPL ROCKCHIP_BACK_TO_BROM has been defined, so drop the explicit enablement for vyasa board. This change is supposed to missed during config move to other locations, and missed to drop the same. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add emmc hs200 support - Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-15Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2019-09-14sh: r2dplus: Fix missing PCI rangeMarek Vasut
Add missing PCI range for translating DRAM to bus addresses. This fixes e.g. PCI NIC interface and allows network to work in QEMU. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14sh: Fix SH4 build with GCC versions without -m4-nofpuMarek Vasut
Pass -m4 instead of -m4-nofpu to GCC versions which do not support the -m4-nofpu option. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14sh: Fix incorrect linking with new binutilsMarek Vasut
Since binutils 2.30 , the resulting U-Boot binary was incorrectly linked against address 0 instead of text base, fix it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-13ARM: dts: dra74x: Fix iodelay configuration for mmc3Faiz Abbas
According to the latest am572x[1] and dra74x[2] data manuals, mmc3 default, hs, sdr12 and sdr25 modes use iodelay values given in MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is selected and correct iodelay values are configured. [1] http://www.ti.com/lit/ds/symlink/am5728.pdf [2] http://www.ti.com/lit/ds/symlink/dra746.pdf Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-09-13arm: k3: Use get_ti_sci_handle() where ever possibleLokesh Vutla
Instead of calling uclass apis everywhere, use get_ti_sci_handle() when ever ti_sci is needed. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-13arm: k3: Fix getting ti_sci handleLokesh Vutla
API get_ti_sci_handle() is relying on the device-tree node name to be "dmsc" for probing the ti_sci device. But with the introduction of debug messages for dmsc, the node name changed to dmsc@44083000. Because of this ti_sci is never probed cause a boot failure. Instead of relying on device-tree node name, use the first available firmware node for probing ti_sci. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-13ARM: omapl138_lcdk: Enable DM_GPIO and DM and GPIO CommandsAdam Ford
The da8xx GPIO driver is available with DM_GPIO support. This patch enables the CMD_GPIO, CMD_DM, and DM_GPIO and DA8XX_GPIO. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13arm: am437x: cm-t43: Add device tree, enable OF_CONTROLSuniel Mahesh
Add device tree from Linux for driver model conversion and enable OF_CONTROL. This will remove the following compile warning: ================================================== Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument =================================================== Target was compile tested, build was clean. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-12armv8: ls1028a: Updated serdes configuration for 0x13BBHou Zhiqiang
In SerDes protocol 0x13BB, lane C was erroneously assigned to PCIE1, this is now updated to PCIE2 Fixes: 36f50b75238e ("armv8: ls1028a: Add other serdes protocal support") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12armv8: fsl-layerscape: Fix typo in Layerscape PCIe config entryHou Zhiqiang
The correct config entry is CONFIG_PCIE_LAYERSCAPE and this typo results in skipping the fixup of Linux PCIe DT nodes. Also enable the fixup when Layerscape Gen4 controller driver is enabled. Fixes: 4da0e52c9dc0 (armv8: fsl-layerscape: fix config dependency for layerscape pci code) Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12armv8: fsl-layerscape: Update I2C clock dividerChuanhua Han
By default, i2c input clock is programmed at platform clk / 2 in u-boot, but this is not correct for all the platforms, Update I2C clock divider's default values as per SoC (LS1012A, LS1028A, LX2160A and LS1088A). Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12armv8: ls1028a: configure PMU's PCTBENR to enable WDTThomas Schaefer
The SP805-WDT module on LS1028A requires configuration of PMU's PCTBENR register to enable watchdog counter decrement and reset signal generation. The watchdog clock needs to be enabled first. Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12arm: dts: ls1028a-qds: define the MDIO MUXAlex Marginean
Add the device-tree structure describing the MUX in board dts. QDS board has an on-board RGMII PHY and 4 slots for extension cards. All these can be accessed over MDIO through a MDIO MUX controlled over I2C. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12dts: armv8: add emmc hs200 support for ls1028ardbYinbo Zhu
Add emmc hs200 support for ls1028ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12dts: armv8: add emmc hs200 support for lx2160ardbYinbo Zhu
Add emmc hs200 support for lx2160ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12dts: armv8: add emmc hs200 support for ls1012ardbYinbo Zhu
Add emmc hs200 support for ls1012ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12fsl-layerscape: Add fsl_esdhc peripheral clock supportYinbo Zhu
Add esdhc peripheral clock support for NXP layerscape platforms: LS1046ARDB, LS1043ARDB, LS1012ARDB, LS1028ARDB, LS1088ARDB, LX2160ARDB Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-11rockchip: clean makefile for misc.cKever Yang
Use obj-$(config) instead of #ifdef $config to make the code looks clean, and move the misc_init for U-Boot proper only. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11rockchip: not depends on TPL_BUILD for rk3188 makefile includingKever Yang
The rk3188/Makefile already depends on !TPL_BUILD, so no need to add this again in parent Makefile, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11rockchip: rk3399: dts: add boot order for rockpro64Kever Yang
The rk3399 rockpro64 board can boot from emmc and sdcard. TODO: add spiflash as boot device. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-10x86: tangier: Use spaces over TABs in ASL codeAndy Shevchenko
For sake of consistency use spaces over TABs in ASL code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10x86: tangier: Fix off-by-one error when preparing CSRTAndy Shevchenko
Intel iDMA 32-bit controller has 17 bits for the maximum block size value. Due to nature of the binary number representation the maximum value is 2^17 - 1. The original code misses the latter part in equation. Fixes: 5e99fde34a77 ("x86: tangier: Populate CSRT for shared DMA controller") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10x86: tangier: Reserve PCI ECAM in motherboard resourcesAndy Shevchenko
Per PCI firmware specification the ACPI has to reserve the memory which is defined as PCI ECAM. Fixes: 39665beed6f7 ("x86: tangier: Enable ACPI support for Intel Tangier") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10x86: acpi: Annotate struct acpi_table_header with __packedAndy Shevchenko
GCC 9.2 starts complaining about possible pointer misalignment of pointers to the unpacked (alignment=4) structures in the packed (alignment=1) ones: CC arch/x86/cpu/tangier/acpi.o arch/x86/cpu/tangier/acpi.c: In function ‘acpi_create_fadt’: arch/x86/cpu/tangier/acpi.c:22:37: warning: taking address of packed member of ‘struct acpi_fadt’ may result in an unaligned pointer value [-Waddress-of-packed-member] 22 | struct acpi_table_header *header = &(fadt->header); CC arch/x86/lib/acpi_table.o arch/x86/lib/acpi_table.c: In function ‘acpi_create_spcr’: arch/x86/lib/acpi_table.c:366:37: warning: taking address of packed member of ‘struct acpi_spcr’ may result in an unaligned pointer value [-Waddress-of-packed-member] 366 | struct acpi_table_header *header = &(spcr->header); Fix the potential issues by annotating embedded structures with __packed even though they are packed naturally. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add GCC version number in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10x86: efi_loader: Use efi_add_conventional_memory_map()Park, Aiden
Use efi_add_conventional_memory_map() to configure EFI conventional memory properly with ram_top value. This will give 32-bit mode U-Boot proper conventional memory regions even if e820 has an entry which is greater than 32-bit address space. Signed-off-by: Aiden Park <aiden.park@intel.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [bmeng: fixed some typos in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10x86: show UEFI images involved in crashHeinrich Schuchardt
If a crash occurs, show the loaded UEFI images to facilitate analysis. This is an example output: => bootefi 0x1000000 Found 0 disks Hello world of bugs! Invalid Opcode (Undefined Opcode) EIP: 0010:[<06ceb06e>] EFLAGS: 00010206 Original EIP :[<fec9906e>] EAX: 00000000 EBX: 06cec000 ECX: 00000fd0 EDX: 00000001 ESI: 06ced18a EDI: 07d0fe10 EBP: 07fe27a0 ESP: 07d0fde0 DS: 0018 ES: 0018 FS: 0020 GS: 0018 SS: 0018 CR0: 00000033 CR2: 00000000 CR3: 00000000 CR4: 00000000 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Stack: 0x07d0fde8 : 0x00000000 0x07d0fde4 : 0x06ced040 --->0x07d0fde0 : 0x07fe27a0 0x07d0fddc : 0x00010206 0x07d0fdd8 : 0x00000010 0x07d0fdd4 : 0x06ceb06e UEFI image [0x06cea000:0x06cf0fff] pc=0x106e '/bug-i386.efi' ### ERROR ### Please RESET the board ### With the additional information provided by this patch we know that the problem occurred 0x106e after the load address of bug-i386.efi. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10x86: qemu: Report high memory in the E820 tableBin Meng
Now that we are able to get the size of high memory from QEMU, report its memory range as usable ram. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Aiden Park <aiden.park@intel.com>
2019-09-10x86: qemu: Support getting high memory sizeBin Meng
At present only size of memory that is below 4GiB is retrieved from QEMU. Add a function that gets size of memory that is above 4GiB. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Aiden Park <aiden.park@intel.com>
2019-09-10x86: qemu: Extract getting memory size to a separate routineBin Meng
This extracts getting memory size logic in dram_init() to a separate routine qemu_get_low_memory_size(). No functional changes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Aiden Park <aiden.park@intel.com>
2019-09-10x86: Drop weak version board_get_usable_ram_top()Bin Meng
Every x86 platform provides board_get_usable_ram_top(), hence there is no need to provide a weak version board_get_usable_ram_top(), not to mention there is another weak version board_get_usable_ram_top() in common/board_f.c. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Aiden Park <aiden.park@intel.com>
2019-09-10x86: acpi: Slightly reduce binary size of ACPI tables for TangierAndy Shevchenko
Using ACPI predefined macros, such as Zero or One, will reduce a binary size of resulting ACPI tables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: manually fixed the conflicts when applying] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-08Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
Bug fixes to mmc_spi Add Aspeed SD driver Fix dw_mmc timeout calculation Fix timeout values passed to mmc_wait_dat0 sdhci dt caps/mask update [trini: Fix evb-ast2500_defconfig CONFIG_MMC line] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-07Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Initial DM conversion
2019-09-06Merge tag 'rpi-next-2019.10' of https://github.com/mbgg/u-bootTom Rini
- fix mailbox status register used for polling - fix bcm2835_sdhost to wait long enough for a transfer to complete - increase kernel image size from 8 MB to 64 MB on arm64 - add support for RPi4 - add prefixes for raspberry pi related stuff to git-mailrc
2019-09-06ARM: bcm283x: Include definition for additional emmc clockAndrei Gherzan
This clock has a different mbox ID so have this included in the relevant header file. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06ARM: bcm283x: Define configs for RaspberryPi 4Andrei Gherzan
Define two target configs for Raspberry Pi 4 (32 and 64bit) and the corresponding BCM2838* configs. Be aware of the current limitation in firmware which requires an explicit configuration to force the arm in 64bit mode when the respective target is used. Signed-off-by: Andrei Gherzan <andrei@balena.io> [mb: rename BCM2838 -> BCM2711] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06ARM: bcm283x: Add BCM283x_BASE defineMatthias Brugger
Devices of bcm283x have different base address, depending if they are on bcm2835 or bcm2836/7. Use BCM283x_BASE depending on the SoC you want to build and only add the offset in the header files. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Andrei Gherzan <andrei@balena.io>
2019-09-06ARM: bcm283x mbox: Fix send status registerFabian Vogt
Before we can send a message to the mailbox we have to check that there is space to do so. Therefore we poll the status register. But up to now the wrong status register, the one of mailbox 0, was checked. Fix this by polling the status regiser of mailbox 1. Signed-off-by: Fabian Vogt <fvogt@suse.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> [mb: rename registers and update commit message] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-05ARM: dts: ast2500: Add SDHCI nodesEddie James
Add nodes for the Aspeed SD controllers with their necessary properties. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Eddie James <eajames@linux.ibm.com>
2019-09-05mmc: Add Aspeed SD controller driverEddie James
Add support for the Aspeed SD host controller engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2019-09-05clk: aspeed: Add support for SD clockEddie James
Add code to enable the SD clock on the ast2500 SoC. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Eddie James <eajames@linux.ibm.com>
2019-09-04arm: dts: Set custom names for cp110 master/slave MDIO busesAlex Marginean
Implicitly Marvell MDIO driver uses DT node names for devices, but in this case that is not unique. Set MDIO device names for master/slave to cpm/cps. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04drivers/fsl-mc: Create Kconfig file to manage driver specific configs betterFlorinel Iordache
Create drivers/net/fsl-mc/Kconfig and move fsl-mc specific configs from arch/arm/cpu/armv8/fsl-layerscape/Kconfig to this new Kconfig Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-03Merge tag 'arc-for-2019.10-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc These are some very late changes mostly required to get 64-bit division working on ARC boards. For that we had to import missing parts of libgcc and add compiler flags to EMSDP which otherwise used very simple profile for compliation. And while at it another fix for EM SDP initialization is inluded as well.
2019-09-03arc: libgcc: Import __udivdi3 & __udivmoddi4 to allow 64-bit divisionAlexey Brodkin
As reported by Kever here [1] we were unable to compile 64-bit division code due to missing definition of __udivdi3(). Import its implementation and __udivmoddi4() as its direct dependency from today's libgcc [2]. [1] https://patchwork.ozlabs.org/patch/1146845/ [2] https://github.com/gcc-mirror/gcc/commit/5d8723600bc0eed41226b5a6785bc02a053b45d5 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Kever Yang <kever.yang@rock-chips.com>
2019-09-03Merge tag 'for-v2019.10-v2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-i2c i2c bugfixes for 2019.10 take 2 - i2c: mxc: add CONFIG_CLK support If CONFIG_CLK is enabled use clk framework for clock settings.
generated by cgit (git 2.34.1) at 2025-01-09 20:33:41 +0000