summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2018-03-30Drop CONFIG_FTSDC010_BASERick Chen
After drop non-dm code of ftsdc010, the sd register base definition can be droppped now. So CONFIG_FTSDC010_BASE and CONFIG_FTSDC010_BASE_LIST both can be removed from config_whitelist.txt Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30nds32: dts: AG101P support sd High-Speed modeRick Chen
Enable High-Speed mode with cap-sd-highspeed in dts Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: dts: AE250 support sd High-Speed modeRick Chen
Enable High-Speed mode with cap-sd-highspeed in dts. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: bootm: Remove ATAGSRick Chen
ATAGS is not supported and will be replaced by DT in riscv-linux. So can be removed now. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: bootm: Support to boot riscv-linuxRick Chen
riscv-linux should use BBL (Berkeley bootloader) for loading the Linux kernel. U-Boot can play as FSBL(first stage bootloader) to boot BBL and riscv-linux. In BBL's init_first_hart(), it will pass dtb with a1. So implement bootm to pass arguments to BBL correctly. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix static const char * array declarationsRick Chen
It is reported by checkpatch.pl WARNING: static const char * array should probably be static const char * const Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix missing a blank line after declarationsRick Chen
It is reported by checkpatch.pl WARNING: Missing a blank line after declarations. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix alignment should match open parenthesisRick Chen
It is reported by checkpatch.pl. CHECK: Alignment should match open parenthesis Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix use of volatileRick Chen
It is reported by checkpatch.pl WARNING: Use of volatile is usually wrong: see Documentation/process/volatile-considered-harmful.rst Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix Macro argument reuseRick Chen
It is CHECK reported by checkpatch.pl CHECK: Macro argument reuse 'PTE' - possible side-effects? Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-25Merge tag 'xilinx-for-v2018.05' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.05 - Fix mkimage recognition - Update all my fragments ZynqMP: - Use clk driver - Support loading elfs in el1 - Various DTS and defconfig changes - Enable newer pmufw versions - Support more clocks - Remove ep108 - Secure image support - Fix memtest setup Zynq: - Enabling watchdog driver - Support more clocks - defconfig changes fpga: - Simplify error path net: - GMII case update
2018-03-23Merge git://git.denx.de/u-boot-arcTom Rini
Alexey: 1. Significantly rework cache-related functionality. In particular that fixes coherency problems in some corner-cases, allows us to enable and disable caches in run-time and still have properly running system, finally support execution from real flash (before we used to run from DDR from the very beginning). 2. Remove string routines implemented in assembly. That allows us to build and run U-Boot on wide range of ARC cores with different configurations. I.e. whatever tuning is used on GCC's command-line we'll get code for desired flavor of ARC. Otherwise for each and every corner-case we would need to add ifdefs in assembly code to accommodate missing instructions etc. 3. Get use of GCC's garbage collector which helps to slim-down resulting image quite a bit. 4. Also now we may disable U-Boot self-relocation for ARC if needed either by platform or for debugging purposes.
2018-03-23ARC: bootm: Refactor GO and PREP subcommands implementationEugeniy Paltsev
Refactor GO and PREP subcommands implementation for a simpler override in the boards platform code. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-23arm64: zynqmp: Add support for verifying secure imagesSiva Durga Prasad Paladugu
This patch adds new command "zynqmp" to handle zynqmp specific commands like "zynqmp secure". This secure command is used for verifying zynqmp specific secure images. The secure image can either be authenticated or encrypted or both encrypted and authenticated. The secure image is prepared using bootgen and will be in xilinx specific BOOT.BIN format. The optional key can be used for decryption of encrypted image if user key was specified while creation BOOT.BIN. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23arm64: zynqmp: Remove ep108 boardMichal Simek
ZynqMP Emulation board is no longer tested and there is no reason to keep maintaining it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23arm: zynq: Enable cadence driver on zc706Michal Simek
Enable watchdog with reset-on-timeout feature. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23arm: zynq: Wire watchdog internalsMichal Simek
Watchdog is only enabled in full u-boot. Adoption for SPL should be also done because that's the right place where watchdog should be enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23arm64: zynqmp: Enable newer pmufw versionsMichal Simek
As of now newer pmufw is keeping old interfaces. That's why permit u-boot to run on newer version. Recommended version will be setup later. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23arm64: zynqmp: Convert board to use zynqmp-clk driverMichal Simek
Use zynqmp clock driver instead of fixed clocks. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-22Merge git://git.denx.de/u-boot-netTom Rini
2018-03-22ARM: dts: da850-lcdk: Sync from Linux 4.16Lokesh Vutla
Sync dts from Linux 4.16 and also add u-boot specific dtsi for OMAPl138 board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-22davinci: Enable DDR_INIT for DA8XXLokesh Vutla
Commit 6aa4ad8e3820 ("Convert CONFIG_SOC_DA8XX et al to Kconfig") converted SOC_DA8XX to Kconfig but missed enabling DDR_INIT for SOC_DA8XX, which broke OMAPL138 to boot. Commit 2e87980580d0 ("davinci: Fix omapl138_lcdk builds") disabled DDR_INIT for all DA850 SoCs. This failed all DA850 boards to boot as ddr is not being initialized. Enable SYS_DA850_DDR_INIT for DA8XX so that all DA850 and OMAPL138 will have ddr initialized Fixes: 2e87980580d0 ("davinci: Fix omapl138_lcdk builds") Fixes: 6aa4ad8e3820 ("Convert CONFIG_SOC_DA8XX et al to Kconfig") Reported-by: Sekhar Nori <nsekhar@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-22armv8: layerscape: csu: enable ns access to PFE registersCalvin Johnson
Enable all types of non-secure access to PFE block registers. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22armv8: fsl-lsch2: configure pfe's DDR and HDBUS interfaces and ECCCalvin Johnson
1. Set AWCACHE0 attribute of PFE DDR and HDBUS master interfaces to bufferable. 2. Set RD/WR QoS for PFE DDR and HDBUS AXI master interfaces. 3. Disable ECC detection for PFE. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structureCalvin Johnson
SoC specific PFE macros are defined and structure ccsr_scfg is updated with members defined for PFE. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22armv8: fsl-layerscape: Add support of GPIO structurePrabhakar Kushwaha
Layerscape Gen2 SoC supports GPIO registers to control GPIO signals. Adding support of GPIO structure to access GPIO registers. Signed-off-by: Pratiyush Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-21mips: bmips: add ar-5315 usb supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add support for bcm6318 usbÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add vr-3032u usb supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add support for bcm63268 usbÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add dgnd3700v2 usb supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add support for bcm6362 usbÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add ar-5387un usb supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add support for bcm6328 usbÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add wap-5813n usb supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add support for bcm6368 usbÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add nb4-ser usb supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add hg556a usb supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add support for bcm6358 usbÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add ct-5361 usb supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21mips: bmips: add support for bcm6348 usbÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21MIPS: add BMIPS Netgear DGND3700v2 boardÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21MIPS: add support for Broadcom MIPS BCM6362 SoC familyÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-21ARC: Cache: Refactor arc_ioc_setup()Eugeniy Paltsev
Move all checks before cache flush and IOC setup. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21ARC: Cache: Add missing cache cleanup before cache disableEugeniy Paltsev
Add missing cache cleanup before cache disable: * Flush and invalidate L1 D$ before disabling. Flush and invalidate SLC before L1 D$ disabling (as it will be bypassed for data) Otherwise we can lose some data when we disable L1 D$ if this data isn't flushed to next level cache. Or we can get wrong data if L1 D$ has some entries after enable which we modified when the L1 D$ was disabled. * Invalidate L1 I$ before disabling. Otherwise we can execute wrong instructions after L1 I$ enable if we modified any code when L1 I$ was disabled. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21ARC: Cache: Add more HW configuration checksEugeniy Paltsev
Add additional cache configuration checks and note about supported configurations. It is unlikely to face some configuration in real life but it's better to be prepared and refuse to work on those. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21ARC: Implement a function to sync and cleanup cachesEugeniy Paltsev
Implement specialized function to clenup caches (and therefore sync instruction and data caches) which can be used for cleanup before linux launch or to sync caches during U-Boot self-relocation. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21ARC: Cache: Fix SLC operations when SLC is bypassed for dataEugeniy Paltsev
If L1 D$ is disabled SLC is bypassed for data and all load/store requests are sent directly to main memory. If L1 I$ is disabled SLC is NOT bypassed for instructions and all instruction requests are fetched through SLC. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21ARC: Cache: Implement [i,d]cache_enabled() as separate functionsEugeniy Paltsev
Implement icache_enabled() and dcache_enabled() as separate functions which can be used with "inline" attribute. This is a preparation to make them always_inline. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21ARC: Move IOC enabling to compile-time optionsEugeniy Paltsev
Use CONFIG_ARC_DBG_IOC_ENABLE Kconfig option instead of ioc_enable global variable. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
generated by cgit (git 2.34.1) at 2025-02-15 06:48:29 +0000