summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-10-25dts: mtmips: add default pinctrl for gardena-smart-gateway-mt7688Weijie Gao
This adds default pinctrl (dual SPI chip select) for gardena smart gateway Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add mmc related nodes for mt7628an.dtsiWeijie Gao
This patch adds mmc related nodes for mt7628an.dtsi Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: enable eth port0 led and link poll functions for all boardsWeijie Gao
This patch adds default p0led status and phy0 link polling for all boards. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: update reset controller node for mt7628Weijie Gao
This patch updates reset controller node for mt7628 Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add default pinctrl for uart nodesWeijie Gao
This patch adds default pinctrl for uart nodes Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add pinctrl node for mt7628Weijie Gao
This patch adds pinctrl node with default pin state for mt7628an.dtsi. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add clock node for mt7628Weijie Gao
This patch adds clkctrl node for mt7628 and adds clocks property for some node. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: enable high-speed UART support for mt7628Weijie Gao
All three UARTs of mt7628 are actually MediaTek's high-speed UARTs which support baudrate up to 921600. The high-speed UART is compatible with ns16550 when baudrate <= 115200. Add compatible string to dtsi file so u-boot can use it when serial_mtk driver is built in. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: move uart property clock-frequency into mt7628an.dtsiWeijie Gao
The UART of MT7628 has fixed 40MHz input clock so there is no need to put clock-frequency in every dts files. Just put it into the common dtsi file. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25mips: bmips: switch to board defines for dtbÁlvaro Fernández Rojas
Fixes commit 344db3f, which added missing bmips dtbs depending on their SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: correct name charactersÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: enable vr-3032u nand supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: bcm63268: add support for brcmnandÁlvaro Fernández Rojas
BCM63268 uses 4.0 HW nand controller, which is currently supported by brcmnand driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: bcm6362: add support for brcmnandÁlvaro Fernández Rojas
BCM6362 uses old 2.2 HW nand controller, which isn't currently supported by brcmnand driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: bcm6328: add support for brcmnandÁlvaro Fernández Rojas
BCM6328 uses old 2.2 HW nand controller, which isn't currently supported by brcmnand driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: bcm6368: add support for brcmnandÁlvaro Fernández Rojas
BCM6368 uses old 2.1 HW nand controller, which isn't currently supported by brcmnand driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25MIPS: add compile time definition of L2 cache sizeRamon Fried
If configuration is set to skip low level init, automatic probe of L2 cache size is not performed and the size is set to 0. Flushing or invalidating the L2 cache will fail in this case. Add a static configuration (SYS_DCACHE_LINE_SIZE) with default set to 0. Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
2019-10-24Merge branch '2019-10-24-UFS-support'Tom Rini
- Add Universal Flash Storage (UFS) support
2019-10-24Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Add support for HyperBus Memory Controller of TI's J721e and AM654 SoCs (Vignesh)
2019-10-24arm: dts: k3-j721e-som-p0: Add HyperFlash nodeVignesh Raghavendra
J721e SoM as a 64MB HyperFlash on board. Add pinmux and DT node for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-24arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller nodeVignesh Raghavendra
Add DT node for HyperBus Memory Controller in the FSS. On J721e, its not possible to use OSPI0 and HBMC simultaneously as they are muxed within the Flash Subsystem hence disable HBMC by default as keep OSPI enabled. Bootloader will fixup DT when it detects HyperFlash instead of OSPI. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-23arm: dts: k3-j721e-main: Add UFS nodesFaiz Abbas
Add TI UFS glue layer and Cadence UFS Host controller DT nodes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-21armv7: ls102xa: Don't power down OCRAM1 during deep sleepBiwen Li
To allow OCRAM to be used as wakeup source in deep sleep, do not power it down. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: add errata ID A-008646 for workaroundBiwen Li
The patch adds an errata ID A-008646 for workaround to provide more information by errata ID. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: Update LX2160A/LX2120A/LX2080A SVR valueWasim Khan
LX2160A/LX2120A/LX2080A SVR value should be 0x873600/0x873620/0x873602 Previous values were valid only if CAN fuse is blown. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: ls1028a: disable multimedia for ls1027a, ls1017aYuantian Tang
ls1028a has 4 personalities: ls1028a, ls1027a, ls1017a and ls1018a. Both ls1027a and ls1017a personalities are lower functionality version which doesn't support the multimedia subsystems, like LCD, GPU. To disable multimedia feature on non-multimedia version, set the status property to disabled in dts nodes. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: Correct endianness of SCFG_SPARECR8 readBiwen Li
The patch corrects endianness of register SCFG_SPARECR8 read in_le32 -> in_be32 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: fsl-layerscape: Make USB masters snoopableRan Wang
Program register bit of SCFG_SNPCNFGCR_USBxRDSNP and SCFG_SNPCNFGCR_USBxWRSNP(x = 1, 2, 3) to drive USBx read/write snoop signal on LS1043A and LS1046A. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: Update SCFG_QSPI_CLKSEL valueKuldeep Singh
Update SCFG_QSPI_CLKSEL value : 0xC -> 0x5 which means ClusterPLL/16 Signed-off-by: Ashish Kumar <Ashish.kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: ls1028a: Add more personalities supportYuantian Tang
Add LS1027A, LS1018A and LS1017A personalities support to LS1028A SoC family. LS1028A is the prime personality of LS1028A SoC family. LS1027A is a lower funtionality version of QorIQ LS1028A which does not support the multimedia subsystems, such as LCD controller, GPU, and eDP PHY. The QorIQ LS1018A and LS1017A SoCs are single 64-bit Arm A72 core, low power versions of the QorIQ LS1028A and LS1027A SoCs respectively. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-18Merge tag 'u-boot-amlogic-20191018' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - document alternative libretech-cc installation methods, including upstream TF-A and opensource tools - add HDMI/CVBS display support for Amlogic G12A SoCs and SEI510 board - add support for Amlogic A311D based Khadas VIM3 - add support for Amlogic S905X3 based SEI610 board, targeting Android support like SEI510
2019-10-18ARM: dts: meson-sm1: add U-Boot specific DT for graphicsNeil Armstrong
Rename meson-g12a-u-boot.dtsi into meson-g12-common-u-boot.dtsi to match the new DT architecture and add meson-sm1-sei610-u-boot.dtsi to handle the U-Boot specific DT for graphics. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: dts: Import SEI610 DT from Linux 5.4-rc2Neil Armstrong
Import the Amlogic SM1 DT and the SEI610 board DT from [1] [1] da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: meson: add SM1 SoC idNeil Armstrong
Add the missing IDs to detect the SM1 S905X3 SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: meson: Recognize A311D SoCAndreas Färber
Values imported from Linux driver, but in correct numeric order. Khadas VIM3 prints: Amlogic Meson G12B (A311D) Revision 29:b (10:2) Cc: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: meson: Tidy SoC information outputAndreas Färber
Write SoC instead of Soc. The Linux driver is not affected. Fixes: f41d723b9f ("ARM: meson: display Amlogic SoC Information") Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: dts: Import and update DT for Khadas VIM3Andreas Färber
In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts. Copied from da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: dts: meson-g12a: add U-Boot specific DT for graphicsNeil Armstrong
Like the meson-gx support, add the U-Boot specific bits in DT to support graphics on G12A SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18arm: meson: board-g12a: Setup VPU in fdtNeil Armstrong
If VIDEO_MESON is enabled, we need to setup the fdt for the framebuffer. Call meson_vpu_rsv_fb() which reserves the framebuffer memory region for EFI, and sets up simple-framebuffer nodes if simplefb support is enabled. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18RISC-V: Align boot image header with LinuxAtish Patra
The released Linux boot image header in v5.3 is different from the one present in U-Boot. Align the header with the new version. The changes in Linux are backward compatible. Previous U-Boot releases with older header will continue to work as well. As v5.3 kernel is the first one to support image header, there is no compatibility issue between new U-Boot (with this patch) and older kernel. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Rick Chen <rick@andestech.com>
2019-10-18gpio: sifive: add support for DM based gpio driver for FU540-SoCSagar Shrikant Kadam
This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-16Merge tag 'dm-pull-15oct19' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman enhancements: - Dropping some test Elf files and building them from source instead - Refactoring of x86 16-bit entries - Support for SPL symbols within sections - Handle the 'notes' sections and hidden symbols in recent binutils - Improved error reporting with a tool fails libfdt and documentation fixes vboot required-key test driver model power-domain controls patman Message-Id enhancement
2019-10-16arm: remove the H2200 boardHeinrich Schuchardt
U-Boot cannot be built for h2200_defconfig with CONFIG_DM=y. The maintainer Lukasz Dalek suggested to remove the board. https://lists.denx.de/pipermail/u-boot/2019-August/380685.html Cc: Lukasz Dalek <luk0104@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [trini: As this is the last non-toradex PXA board, update travis too] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-15sandbox: fix build error due to missing struct udevice definitionAKASHI Takahiro
Without this patch, compiling may potentially fail. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15sandbox: fix cpu property in test.dts for pytestAKASHI Takahiro
When I tried to run some new efi tests with pytest, efi_smbios_register() triggered a segmentation fault. Here is the location where it happened: efi_init_obj_list() efi_smbios_register() write_smbios_table() smbios_write_type4() smbios_write_type4_dm() where dev_get_parent_platdata() should return a pointer to struct cpu_platdata, but it is actually NULL because any cpu device on sandbox is attached to "root_driver." With this patch, this issue will be fixed by moving all the definitions of cpus under "cpus" node so that they have a "cpu_bus" parent. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15binman: x86: Separate out 16-bit reset and init codeSimon Glass
At present these two sections of code are linked together into a single 2KB chunk in a single file. Some Intel SoCs like to have a FIT (Firmware Interface Table) in the ROM and the pointer for this needs to go at 0xffffffc0 which is in the middle of these two sections. Make use of the new 'reset' entry and change the existing 16-bit entry to include just the 16-bit data. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-14Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- vining_fpga updates
2019-10-14Merge tag 'u-boot-imx-20191014' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191014 ------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628 - logicpd pinmux - i.MX7ULP: imx_ddr_size - fixes Toradex i.MX6/i.MX7 - pico-imx7d - tpc70 converted to DM - New Board: meerkat96 - add HAB version command - i.MX8 : imx8: Jump from alias to OCRAM address at SPL init imx8qm/qxp: Set SPL TEXT base to OCRAM base
2019-10-14Merge tag 'video-for-2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - panel bridge support in stm32 ltdc - DSI host uclass - sandbox DSI host uclass test driver and DSI host test - MIPI DSI helpers - Synopsys Designware MIPI DSI host bridge driver - STM32 DSI controller driver - OTM800A and RM68200 panel support - DSI host updates for stm32f769 and stm32mp1 dtsi files - splash screen for stm32f769 and stm32mp1 boards - stm32 defconfig updates for display support
2019-10-14Merge tag 'mmc-10-10-2019' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc - Add sdhci driver for Broadcom iProc platform - Add a driver callback for power-cycle for mmc - Implement host_power_cycle callback for stm32_sdmmc2 - spl: dm_mmc: Initialize only the required mmc device
generated by cgit (git 2.34.1) at 2025-01-02 18:36:58 +0000