summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-06-06ARM: dts: stm32: Add Ethernet support on stm32mp1Christophe Roullier
This patch add Ethernet support on stm32mp157 eval board Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
2019-06-06watchdog: stm32mp: Add watchdog driverPatrice Chotard
This patch adds IWDG (Independent WatchDoG) support for STM32MP platform. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-06-06ARM: dts: stm32mp: Add iwdg2 support for stm32mp157cPatrice Chotard
This patch adds independent watchdog support for stm32mp157c in SPL. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-06-06stm32mp1: Increase ENV_SIZEPatrice Chotard
Increase ENV_SIZE from 4 to 8 Ko Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06stm32mp1: activate NAND and NOR support on EV1Patrick Delaunay
Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-06arm: mach-stm32mp: Add newline to the MAC error messageManivannan Sadhasivam
Without newline, the error message appears for non prgrammed OTP boards looks messsy. Hence add it to look more clean. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06board: stm32mp1: Add Avenger96 board supportManivannan Sadhasivam
Add support for Avenger96 board from Arrow Electronics based on STM32MP157 MPU. This board is one of the Consumer Edition (CE) boards of the 96Boards family and has the following features: SoC: STM32MP157AAC PMIC: STPMIC1A RAM: 1024 Mbyte @ 533MHz Storage: eMMC v4.51: 8 Gbyte microSD Socket: UHS-1 v3.01 Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac Bluetooth®v4.2 (BR/EDR/BLE) USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4 LED: 4x User LED, 1x WiFi LED, 1x BT LED More information about this board can be found in 96Boards website: https://www.96boards.org/product/avenger96/ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06arm: dts: stm32mp157: Add missing pinctrl definitionsManivannan Sadhasivam
Add missing pinctrl definitions for STM32MP157. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-05arm: davinci: remove leftover assemblyBartosz Golaszewski
There are no more users of lowlevel_init.S. Remove the file. Suggested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-06-05arm: omap3: Manually initialize GPIO if OF_CONTROL doesn'tAdam Ford
The commong initialization code manually initializes the GPIO even when OF_CONTROL does it, so we can reduce the code size a bit by not doing it manually when we have device tree support. Using the omap3_logic board (dm3730), the sizes shrunk: Before: text data bss dec hex filename 561066 28596 116880 706542 ac7ee u-boot 55245 1605 1888 58738 e572 spl/u-boot-spl After text data bss dec hex filename 560898 28548 116872 706318 ac70e u-boot 55121 1557 1888 58566 e4c6 spl/u-boot-spl Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-05ARM: DTS: imx6q-logicpd: Resync with Linux 5.1Adam Ford
Resync imx6q-logicpd with Kernel 5.1.5 Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-05ARM: davinci: Remove ipam390 linker script from KconfigAdam Ford
With ipam390 support removed in we can remove the reference to the linker script since that case will never be true. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-06-05ARM: davinci: SPL: fix BSS initializationSekhar Nori
U-Boot README recommends initializing SDRAM in board_init_f(). DA850 was doing it as part of board_init_r() (through call to spl_board_init() which calls arch_cpu_init() which calls da850_ddr_setup()) This worked fine till commit 15b8c7505819 ("davinci: da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full") moved BSS to SDRAM. Functions like mmc_initialize() called in board_init_r() assume BSS is available. Since SDRAM was not initialized when arch/arm/lib/crt0.S tried to initialize BSS to 0, BSS is not initialized correctly. Fix this by simply calling arch_cpu_init() from board_init_f(). Also move preloader_console_init() there to help debug issues with board_init_r(). With this spl_board_init() is no longer needed, we remove it. Tested using MMC/SD boot on OMAP-L138 LCDK board. Tested-by: Adam Ford <aford173@gmail.com> #da850evm Signed-off-by: Sekhar Nori <nsekhar@ti.com> Tested-by: Peter Howard <phoward@gme.net.au> #omapl138_lcdk
2019-06-05Merge git://git.denx.de/u-boot-riscvTom Rini
- Support Microchip MPFS Icicle board. - Enable e1000 and nvme support for qemu. - Enable PCI host ECAM generic driver for qemu. - Increase the environment size to 128kB for qemu.
2019-06-05riscv: Add Microchip MPFS Icicle board supportPadmarao Begari
This patch adds Microchip MPFS Icicle board support. For now, NS16550 serial driver is only enabled. The Microchip MPFS Icicle defconfig by default builds U-Boot for M-Mode with SMP support. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-06-04arm: mvebu: helios4: add MMC to SPL DTDennis Gilmore
This allows SPL to load the main U-Boot image from MMC once DM_MMC is enabled. Signed-off-by: Dennis Gilmore <dennis@ausil.us> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-31Merge tag 'rockchip-for-v2019.07-rc3' of git://git.denx.de/u-boot-rockchipTom Rini
- some fix for rk3399-puma; - rockchip script make_fit_atf.py cleanup - Enable TPL for rk3399 orangepi and nanopi4; - add support for rk3399 boards: Nanopi NEO4, Rockpro64, Rock PI 4;
2019-05-31ARM: meson-gx: Reset GXL/GXM to external PHY when not using internal PHYNeil Armstrong
When using External PHY, reset the mux to use the external PHY in case U-Boot was chainloaded from a misconfigured bootloader. Fixes: 33e3378091 ("ARM: meson: rework soc arch file to prepare for new SoC") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31ARM: dts: Add missing DT for Meson G12A supportNeil Armstrong
The following DT nodes in the process on review for Linux 5.3, until Linux 5.3 is tagged, add the missing DT nodes in u-boot specific DTSI files that will be dropped when the v5.3-rc1 DT is synced again. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31ARM: dts: sync Amlogic G12A DT with Linux 5.2-rc1Neil Armstrong
Sync from Linux commit a188339ca5a3 ("Linux 5.2-rc1") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-30rockchip: rk3399: Add Rock PI 4 supportJagan Teki
Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: rk3399: Add Rockpro64 board supportJagan Teki
Add initial support for Rockpro64 board. Specification - Rockchip RK3399 - 2/4GB Dual-Channel LPDDR3 - SD card slot - eMMC socket - 128Mb SPI Flash - Gigabit ethernet - PCIe 4X slot - WiFI/BT module socket - HDMI In/Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 12V/2A Commit details of rk3399-rockpro64.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: rockpro64 dts add usb regulator" (sha1: 6db644c79c8d45d73b56bc389aebd85fc3679beb) 'Akash' has sent an initial patch before, so I keep him as board maintainer and I'm co-maintainer based on our conversation. Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: rk3399: Add Nanopi NEO4 board supportJagan Teki
Add initial support for Nanopi NEO4 board. Specification - Rockchip RK3399 - 1GB DDR3-1866 - SD card slot - eMMC Socket - RTL8211E 1Gbps - AP6212 WiFI/BT - HDMI In/Out, DP, MIPI CSI - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 5V/3A Commit details of rk3399-nanopi-neo4.dts sync from Linux: "arm64: dts: rockchip: Add Nanopi NEO4 initial support" (sha1: 092470b537f19788d957aed12d835a179b606014) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: Cleanup of make_fit_atf.py.Christoph Muellner
This patch cleans up make_fit_atf.py in the following way: * Fix all issues reported by pylint * Move copyright notice from file-to-generate to script * Fix of-by-one bugs in loadables property * Remove commented-out (dead) code. Besides the bugfix no intended changes. Tested on RK3399-Q7 with TF-A v2.1 as BL31. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: rk3399: Add option to print on UART3.Christoph Muellner
The RK3399 SPL does not use a pinctrl driver to setup the UART pins. Instead it works based on config macros, which set the base address of the actual UART block. Currently the RK3399 SPL support UART0 and UART2. This patch adds UART3 in the same way as UART0. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: pinctrl: rk3399: Add support for UART3.Christoph Muellner
This patch adds the missing GRF bit definitions for UART3 on the RK3399. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-29Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
- Audio support
2019-05-28mcx: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-28twister: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-05-28mt_ventoux: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-05-28cm_t3517: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-28ipam390: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-05-28eco5pk: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-28ea20: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-05-28calimain: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-26Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Gen3 PCIe driver + enablement on Salvator-X platforms. - Gen3 recovery SPL used to reload ATF/OpTee/U-Boot instead of minimon. - SDHI HS400 fixes ported from latest BSP and datasheet.
2019-05-26Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- SoCFPGA PL310 cleanup + A10 fix, A10 DT cleanup, DW GPIO fix.
2019-05-25Merge tag 'mips-pull-2019-05-24' of git://git.denx.de/u-boot-mipsTom Rini
- mtmips: network stability fixes for gardena-smart-gateway - mtmips: enable CONFIG_USE_PREBOOT and CONFIG_CMD_WDT
2019-05-24tegra: sound: Add an I2S driverSimon Glass
Add a driver which supports transmitting digital sound to an audio codec. This uses fixed parameters as a device-tree binding is not currently defined. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-05-24tegra: sound: Add an audio hub driverSimon Glass
Add a driver for the audio hub. This is modelled as a misc device which supports writing audio data from I2S. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-05-24tegra: Add a delay in clock_start_periph_pll()Simon Glass
This function enables a peripheral clock and then immediately sets its divider. Add a delay to allow the clock to settle first. This matches the delay in other places which do a similar thing. Without this, the I2S device on Nyan does not init properly. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-05-24tegra: Correct tegra124 clock nameSimon Glass
The first clock type appears to have and incorrect setting for out of the mux outputs. It should be CLK_M, not OSC. Fix it and its only user. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-05-24mips: mt76xx: Remove cache workaround and select SYS_MALLOC_CLEAR_ON_INITStefan Roese
With commit 06985289d452 ("watchdog: Implement generic watchdog_reset() version") the init sequence has changed in arch_misc_init(), resulting in a re-appearance of the d-cache issue on MT7688 boards (e.g. gardena). When this happens, the first (or sometimes later ones as well) TFTP command hangs and does not complete correctly. This leads to the assumption that the d-cache is not in a clean state once the ethernet driver is called (d-cache is used here for the buffers). The old work- around with the cache flush somehow does not work any more now with the new code change. To fix this issue, this patch now removes the old workaround and selects CONFIG_SYS_MALLOC_CLEAR_ON_INIT for ARCH_MTMIPS. With this option the complete malloc area is initialized with zeros (cache lines are touched). Testing has shown that this also fixes the issue on the MT7688 boards. Signed-off-by: Stefan Roese <sr@denx.de> Suggested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-05-24Arm: dts: socfpga: Remove invalid property from chose nodeTien Fong Chee
Finding bitstream from cff-file is no longer valid after bitstream is built into FIT image and loaded by generic firmware loader. Remove cff-file as this is legacy implementation from A10 downstream. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-24Merge tag 'u-boot-stm32-20190523' of https://github.com/pchotard/u-bootTom Rini
- Add various STM32MP1 fixes for serial, env, clk, board, i2c ... - Add STM32MP1 DDR driver update: These update introduce the DDR interactive mode described in: https://wiki.st.com/stm32mpu/index.php/U-Boot_SPL:_DDR_interactive_mode This mode is used by the CubeMX: DDR tuning tool. https://wiki.st.com/stm32mpu/index.php/STM32CubeMX The DDR interactive mode is NOT activated by default because it increase the SPL size and slow down the boot time (200ms wait added).
2019-05-24Merge git://git.denx.de/u-boot-mpc85xxTom Rini
- Enable DM for SATA, SDHC, USB in T2080QDS
2019-05-24m68k: add dspi chip-select supportAngelo Dureghello
Signed-off-by: Angelo Dureghello <angelo@sysam.it> Changes for v5: - new patch
2019-05-24m68k: move dspi bus control functions into cf_spi.c driverAngelo Dureghello
This patches move dspi bus-related operations into more proper location, to avoid the driver to declares them as externs. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2019-05-24m68k: add OF control support to m68kAngelo Dureghello
Add SUPPORT_OF_CONTROL at this stage, to avoid to break build bisectability. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2019-05-24m68k: enabling long jumps on mcf54x5 SoCsAngelo Dureghello
Growing of binary size asks for long assembly jumps. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
generated by cgit (git 2.34.1) at 2025-01-10 05:18:25 +0000