summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-10-28nios2: Pseudo implement dcache_status/enable/disable()Joachim Foerster
AFAIK the NIOS2 architecture does not have any possibility to dynamically switch off the data cache. So _status() always reports 1 and _enable/_disable() just issue a flush of everything. For example, common/cmd_elf.c depends on these symbols. Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2011-10-28Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: ARM: Add Calxeda Highbank platform dkb: make mmc command as default enabled Marvell: dkb: add mmc support ARM: pantheon: add mmc definition davinci: remove config.mk file from the sources ARM:AM33XX: Add support for TI AM335X EVM ARM:AM33XX: Added timer support ARM:AM33XX: Add emif/ddr support ARM:AM33XX: Add clock definitions ARM:AM33XX: Added support for AM33xx omap3/emif4: fix registers definition davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM davinci: emac: add support for more than 1 PHYs davinci: emac: add new features to autonegotiate for EMAC da850evm: Move LPSC configuration to board_early_init_f() omap4_panda: Build in cmd_gpio support on panda omap: Don't use gpio_free to change direction to input mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset OMAP3: overo : Add environment variable optargs to bootargs OMAP3: overo: Move ethernet CS4 configuration to execute based on board id OMAP3: overo : Use ttyO2 instead of ttyS2. da830: add support for NAND boot mode dm36x: revert cache disable patch dm644X: revert cache disable patch devkit8000: Add malloc space omap: spl: fix build break due to changes in FAT OMAP3 SPL: Provide weak omap_rev_string omap: beagle: Use ubifs instead of jffs2 for nand boot omap: overo: Disable pull-ups on camera PCLK, HS and VS signals omap: overo: Configure mux for gpio10 SPL: Add DMA library omap3: Add interface for omap3 DMA omap3: Add DMA register accessors omap3: Add Base register for DMA arm, davinci: add missing LSPC define for MMC/SD1 U-Boot/SPL: omap4: Make ddr pre-calculated timings as default. DaVinci: correct MDSTAT.STATE mask omap4: splitting padconfs into common, 4430 and 4460 omap4: adding revision detection for 4460 ES1.1 omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL gplug: fixed build error as a result of code cleanup patch kirkwood_spi: add dummy spi_init() gpio: mvmfp: reduce include platform file ARM: orion5x: reduce dependence of including platform file serial: reduce include platform file for marvell chip ARM: kirkwood: reduce dependence of including platform file ARM: armada100: reduce dependence of including platform file ARM: pantheon: reduce dependence of including platform file Armada100: Add env storage support for Marvell gplugD Armada100: Add SPI flash support for Marvell gplugD Armada100: Add SPI support for Marvell gplugD SPI: Add SPI driver support for Marvell Armada100 dreamplug: initial board support. imx: fix coding style misc: pmic: drop old Freescale's pmic driver MX31: mx31pdk: use new pmic driver MX31: mx31ads: use new pmic driver MX31: mx31_litekit: use new pmic driver MX5: mx53evk: use new pmic driver MX5: mx51evk: use new pmic driver MX35: mx35pdk: use new pmic driver misc: pmic: addI2C support to pmic_fsl driver misc: pmic: use I2C_SET_BUS in pmic I2C MX5: efikamx/efikasb: use new pmic driver MX3: qong: use new pmic driver RTC: Switch mc13783 to generic pmic code MX5: vision2: use new pmic driver misc: pmic: Freescale PMIC switches to generic PMIC driver misc:pmic:samsung Enable PMIC driver at GONI target misc:pmic:max8998 MAX8998 support at a new PMIC driver. misc:pmic:core New generic PMIC driver mx31pdk: Remove unneeded config mx31: provide readable WEIM CS accessor MX51: vision2: Set global macros I2C: Add i2c_get/set_speed() to mxc_i2c.c ARM: Update mach-types devkit8000: Add config to enable SPL MMC boot devkit8000: protect board_mmc_init arm, post: add missing post_time_ms for arm cosmetic, post: Codingstyle cleanup arm, logbuffer: make it compileclean tegra2: Enable MMC for Seaboard tegra2: Add more pinmux functions tegra2: Rename PIN_ to PINGRP_ tegra2: Add more clock functions tegra2: Clean up board code a little tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
2011-10-28Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk
* 'master' of git://git.denx.de/u-boot-microblaze: microblaze: Fix strict-aliasing rules for in_be32 microblaze: Wire up axi_ethernet driver initialization
2011-10-27GCC4.6: Squash warnings in omap4 clocks.cMarek Vasut
clocks.c:606:2: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'u32 * const' clocks.c:633:2: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'u32 * const' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warning in tegra2 board.cMarek Vasut
board.c:43:2: warning: format '%08lX' expects type 'long unsigned int', but argument 2 has type 'u32' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warnings in mpc86xx/interrupts.cMarek Vasut
interrupts.c: In function 'interrupt_init_cpu': interrupts.c:62: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' interrupts.c:69: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' interrupts.c:72: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' interrupts.c:75: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' interrupts.c:79: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' interrupts.c:83: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warnings in ddr[123]_dimm_params.cMarek Vasut
ddr1_dimm_params.c: In function 'compute_ranksize': ddr1_dimm_params.c:44: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'long long unsigned int' ddr2_dimm_params.c: In function 'compute_ranksize': ddr2_dimm_params.c:43: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'long long unsigned int' ddr3_dimm_params.c: In function 'compute_ranksize': ddr3_dimm_params.c:74: warning: format '%16lx' expects type 'long unsigned int', but argument 2 has type 'long long unsigned int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-27GCC4.6: Squash warnings in 4xx_pcie.cMarek Vasut
4xx_pcie.c: In function 'pcie_read_config': 4xx_pcie.c:268: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'volatile unsigned char *' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warnings in 4xx_ibm_ddr2_autocalib.cMarek Vasut
4xx_ibm_ddr2_autocalib.c: In function 'DQS_calibration_methodB': 4xx_ibm_ddr2_autocalib.c:910: warning: format '%08X' expects type 'unsigned int', but argument 2 has type 'ulong' 4xx_ibm_ddr2_autocalib.c:911: warning: format '%08X' expects type 'unsigned int', but argument 2 has type 'ulong' 4xx_ibm_ddr2_autocalib.c: In function 'DQS_autocalibration': 4xx_ibm_ddr2_autocalib.c:1217: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'ulong' 4xx_ibm_ddr2_autocalib.c:1230: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'ulong' Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-10-27GCC4.6: Squash warnings in 44x_spd_ddr.cMarek Vasut
44x_spd_ddr.c: In function 'program_tr0': 44x_spd_ddr.c:823: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int' 44x_spd_ddr.c: In function 'program_tr1': 44x_spd_ddr.c:1054: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int' 44x_spd_ddr.c: In function 'program_bxcr': 44x_spd_ddr.c:1127: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' 44x_spd_ddr.c:1196: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' 44x_spd_ddr.c:1196: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' 44x_spd_ddr.c:1196: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' 44x_spd_ddr.c:1196: warning: format '%d' expects type 'int', but argument 5 has type 'long unsigned int' 44x_spd_ddr.c:1242: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warnings in denali_spd_ddr2.cMarek Vasut
denali_spd_ddr2.c: In function 'get_spd_info': denali_spd_ddr2.c:363: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'check_frequency': denali_spd_ddr2.c:390: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'get_dimm_size': denali_spd_ddr2.c:473: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:474: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:475: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:476: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_03': denali_spd_ddr2.c:571: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:604: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:604: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' denali_spd_ddr2.c:643: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:644: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:645: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:646: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:676: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_04': denali_spd_ddr2.c:731: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:733: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:735: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_05': denali_spd_ddr2.c:772: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:774: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_06': denali_spd_ddr2.c:831: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:833: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_11': denali_spd_ddr2.c:860: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_26': denali_spd_ddr2.c:931: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:933: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_27': denali_spd_ddr2.c:944: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_43': denali_spd_ddr2.c:978: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_44': denali_spd_ddr2.c:1006: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warnings in denali_data_eye.cMarek Vasut
denali_data_eye.c: In function 'denali_core_search_data_eye':denali_spd_ddr2.c:646: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_data_eye.c:320: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' denali_data_eye.c:330: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' denali_spd_ddr2.c:676: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_data_eye.c:340: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' denali_data_eye.c:350: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' denali_data_eye.c:360: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27PowerPC: Squash warning in mpc512x serial.cMarek Vasut
serial.c: In function 'serial_setbrg_dev': serial.c:143: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27cosmetic: s/BOARD_LATE_INIT/CONFIG_BOARD_LATE_INITHelmut Raiger
This renames BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT. Along the way it removes some leftover #define BOARD_LATE_INIT 1 and adds some basic documentation for board specific callbacks in README. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
2011-10-27ARM: Add Calxeda Highbank platformRob Herring
Add basic support for Calxeda Highbank platform. Only minimal support with serial and SATA are included. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-10-27ARM: pantheon: add mmc definitionLei Wen
Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27davinci: remove config.mk file from the sourcesVladimir Zapolskiy
To compile TI Davinci SoC support the identical config.mk file from the cpu directory shall be used. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27ARM:AM33XX: Add support for TI AM335X EVMChandan Nath
This patch adds basic support for booting the board. This patch adds support for the UART necessary to get to the u-boot prompt. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27ARM:AM33XX: Added timer supportChandan Nath
This patch adds timer support for AM33xx platform. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27ARM:AM33XX: Add emif/ddr supportChandan Nath
This patch adds AM33xx emif/ddr support along with board specific defines. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27ARM:AM33XX: Add clock definitionsChandan Nath
This patch adds basic clock definition of am33xx SoC. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27ARM:AM33XX: Added support for AM33xxChandan Nath
This patch adds basic support for AM33xx which is based on ARMV7 Cortex A8 CPU. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27omap3/emif4: fix registers definitionIlya Yanok
Fix EMIF4 registers definition. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUMManjunath Hadli
remove macro CONFIG_EMAC_MDIO_PHY_NUM and depending macro EMAC_MDIO_PHY_NUM as they are no longer needed with the support for more than 1 PHYs in davinci emac driver. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27omap: Don't use gpio_free to change direction to inputJoe Hershberger
gpio_free() should not have the side effect of setting the line to input since this prevents the gpio command from being able to set a line as output. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27omap: spl: fix build break due to changes in FATAneesh V
FAT library now uses malloc() and free(). But SPL doesn't have heap until now. Setup a heap in SDRAM to fix this issue. However this increases SPL footprint beyond the available SRAM budget. So, compile out some fancy features in the SDARM init bring back footprint under control CC: Sandeep Paulraj <s-paulraj@ti.com> CC: Wolfgang Denk <wd@denx.de> Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27OMAP3 SPL: Provide weak omap_rev_stringTom Rini
We add an weak version of omap_rev_string in omap-common/spl.c and while at it drop the omap3 version. Move the prototype over to <asm/omap_common.h> with the other SPL functions. Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27omap3: Add interface for omap3 DMASimon Schwarz
Adds an interface to use the OMAP3 DMA. Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27omap3: Add DMA register accessorsSimon Schwarz
Adding the register definitions for omap3 DMA controller to cpu.h Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27omap3: Add Base register for DMASimon Schwarz
Adding the base register address of OMAP3 DMA controller. Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27arm, davinci: add missing LSPC define for MMC/SD1Heiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27DaVinci: correct MDSTAT.STATE maskSergei Shtylyov
MDSTAT.STATE occupies bits 0..5 according to all available documentation, so fix the mask which previously was leaving out the intermediate state indicator bit. While at it, introduce two #define's for that mask -- unfortunately, we can't use a single #define as the assembly code can't include <asm/arch/hardware.h> due to C-specfic constructs in it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27omap4: splitting padconfs into common, 4430 and 4460Ricardo Salveti de Araujo
Not all padconfs are the same between 4430 and 4460, so instead of working around this with an if, we should have an specific padconf structure for both chips (like handling the differences between the LEDs GPIOs and TPS). Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27omap4: adding revision detection for 4460 ES1.1Ricardo Salveti de Araujo
Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org> 2 files changed, 17 insertions(+), 1 deletions(-) Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROLRicardo Salveti de Araujo
OMAP4460 has a different set of values for the ID code, so moving the old ones to be related just with 4430. Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27ARM: orion5x: reduce dependence of including platform fileLei Wen
For files like the drivers/serial/serial.c, it must include the platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the definition in the platform definition files. Include the platform definition file in the config file, so that it would decouple the dependence for the driver files. Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27ARM: kirkwood: reduce dependence of including platform fileLei Wen
For files like the drivers/serial/serial.c, it must include the platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the definition in the platform definition files. Include the platform definition file in the config file, so that it would decouple the dependence for the driver files. Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27ARM: armada100: reduce dependence of including platform fileLei Wen
For files like the drivers/serial/serial.c, it must include the platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the definition in the platform definition files. Include the platform definition file in the config file, so that it would decouple the dependence for the driver files. Updated cpu.h to remove build errors for gplugd board (by prafulla) Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2011-10-27ARM: pantheon: reduce dependence of including platform fileLei Wen
For files like the drivers/serial/serial.c, it must include the platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the definition in the platform definition files. Include the platform definition file in the config file, so that it would decouple the dependence for the driver files. Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27Armada100: Add SPI support for Marvell gplugDAjay Bhargav
This patch add SPI driver support for Marvell gplugD Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
2011-10-27SPI: Add SPI driver support for Marvell Armada100Ajay Bhargav
This patch provides support for SPI emulated over SSP for Marvell Armada100 SOC. Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
2011-10-27dreamplug: initial board support.Jason Cooper
Copied wholeheartedly from board/Marvell/guruplug and modified to add support for SPI NOR flash. CONFIG_MACH_DREAMPLUG defined in include/configs/dreamplug.h until Linus's kernel.org tree adds it to mach-types.h. Once it trickles down, the definition can be removed from include/configs/dreamplug.h. Signed-off-by: Jason Cooper <u-boot@lakedaemon.net>
2011-10-27imx: fix coding styleFabio Estevam
Fix checkpatch warning and errors in several i.MX related files. While at it also address a checkpatch warning at arch/arm/cpu/armv7/mx5/soc.c regarding the usage of extern in a C file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-10-27mx31: provide readable WEIM CS accessorHelmut Raiger
setup_weimcs() and some macros are added to support the setup for i.MX31 WEIM chip selects. As a compromise between verbosity and readability an ASCII-art'ish bit comment is used instead of bitfields. All i.MX31 boards have been patched to use this approach using a helper program to verify the changes. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
2011-10-27ARM: Update mach-typesMarek Vasut
This commit updates the mach-types based on the latest in Linus's head Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-10-27arm, logbuffer: make it compilecleanHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-10-27tegra2: Add more pinmux functionsSimon Glass
This adds support for changing pinmux functions of pin groups. This is done by defining a PMUX_FUNC_... enum which can be used to select the function for each group using pinmux_set_func(). It is also possible to enable pullup/pulldown, and the existing tristate functionality is retained. Also provided is a means of configuring a list of pingroups by providing a configuration table to pinmux_config_table(). Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Warren <twarren@nvidia.com>
2011-10-27tegra2: Rename PIN_ to PINGRP_Simon Glass
The pin groupings are better named PINGRP, since on Tegra2 they refer to multiple pins. Sorry about this, but better to get it right now when there is only a small amount of code affected. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Warren <twarren@nvidia.com>
2011-10-27tegra2: Add more clock functionsSimon Glass
This adds most of the clock functions required by board and driver code: -query and adjust peripheral clocks -query and adjust PLLs -reset and enable control These functions are plumbed in as required. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Warren <twarren@nvidia.com>
2011-10-27tegra2: Rename CLOCK_PLL_ID to CLOCK_IDSimon Glass
Rename CLOCK_PLL_ID to CLOCK_ID which takes account of the fact that the code now deals with both PLL clocks and source clocks. This also tidied up the assert() to match the one sent upstream, and fixes an error in the PWM id. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Warren <twarren@nvidia.com>
generated by cgit (git 2.34.1) at 2024-12-28 11:00:46 +0000