uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Collapse)	Author
2008-04-18	ppc4xx: Change Canyonlands to support booting from 2k page NAND devices	Stefan Roese
	Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-17	Remove all the search paths from the .lds files.	Jason Wessel
	The cross compiler is responsible for providing the correct libraries and the logic to find the linking libraries. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-02	ppc4xx: Canyonlands: Init SATA/PCIe port correctly	Stefan Roese
	Canyonlands (460EX) shares the first PCIe interface with the SoC SATA interface. This usage can be configured with the jumper J6. This patch correctly configures the SATA/PCIe PHY for SATA usage when this jumper is installed. Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-28	ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision	Stefan Roese
	Canyonlands (460EX) shares the first PCIe interface with the SoC SATA interface. This usage can be configured with the jumper J6. This patch displays the current configuration upon bootup and changes the PCIe init loop, to only initialize the availabel PCIe slots. Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-27	ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)	Stefan Roese
	Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-27	ppc4xx: Correctly pass phyiscal FLASH base address into dtb	Stefan Roese
	The routine ft_board_setup() configures the EBC NOR mappings for the Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS problem, we need to pass the corrected address here too. Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-27	ppc4xx: Add AMCC Glacier 406GT eval board support	Stefan Roese
	This patch adds support for the AMCC Glacier 460GT eval board. The main difference to the Canyonlands board are listed here: - 4 ethernet ports instead of 2 - no SATA port - no USB port Currently EMAC2+3 are not working. This will be fixed in a later release. Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15	ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board	Stefan Roese
	This patch adds USB OHCI support to the Canyonlands board port. It also enables EXT2 support. Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15	ppc4xx: Add Canyonlands NAND booting support	Stefan Roese
	460EX doesn't support a fixed bootstrap option to boot from 512 byte page NAND devices. The only bootstrap option for NAND booting is option F for 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap EEPROM needs to be programmed accordingly. This patch adds basic NAND booting support for the AMCC Canyonlands aval board and also adds support to the "bootstrap" command, to enable NAND booting I2C setting. Tested with 512 byte page NAND device (32MByte) on Canyonlands. Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15	ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)	Stefan Roese
	This patch adds support for the AMCC Canyonlands 460EX evaluation board. Signed-off-by: Stefan Roese <sr@denx.de>