summaryrefslogtreecommitdiff
path: root/board/freescale
AgeCommit message (Collapse)Author
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08imx: imx8mn_evk: add board_mmc_get_env_devPeng Fan
Add board_mmc_get_env_dev, otherwise, Loading Environment from MMC... MMC Device 0 not found *** Warning - No MMC card found, using default environment Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx8mn: evk: add READMEPeng Fan
Add a README for users to build a workable image. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: add i.MX8MP EVK boardPeng Fan
Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-07Merge tag 'u-boot-imx-20200107' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx New for 2020.04 --------------- - New boards Embedded Artists COM board Xea Board - Switch to DM: Aristainetos boards Toradex colibri (DM_ETH) iCubox GE bx50v3 mx7dsabre (DM_ETH) cx9020 - New features: Bootaux with elf files Default SYS_THUMB_BUILD for i.MX6/7 - Fixes: DHCOM i.MX6 PDK Engicam i.MX8M tools (imx8m_image) Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07mx6slevk: Fix the pmic_get() parameter in the DM caseFabio Estevam
When pmic_get() is used with DM the first parameter must be the complete node name plus the unit address, so fix it accordingly. Reported-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-07mx6sllevk: Fix the pmic_get() parameter in the DM caseFabio Estevam
When pmic_get() is used with DM the first parameter must be the complete node name plus the unit address, so fix it accordingly. Reported-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-07mx7dsabresd: Fix the pmic_get() parameter in the DM caseFabio Estevam
When pmic_get() is used with DM the first parameter must be the complete node name plus the unit address, so fix it accordingly. Reported-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-07tools: imx8m_image: Change source path for DDR firmware to build dirFrieder Schrempf
The DDR firmware binaries are not part of the U-Boot source code, so we should look for them in the build directory, where they need to be copied to before building U-Boot. The ATF binary is already fetched from the build directory, but the README files for the i.MX8M EVKs claim that it needs to be copied to the source directory (which is still true for in-tree builds, but not in general). Therefore we also fix the READMEs to use the build directory as the correct location for all additional binary files. Sined-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2020-01-07mx7dsabre: Enable DM_ETHJoris Offouga
Also sync device tree with v5.5-rc1 Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2020-01-06Merge branch 'next'Tom Rini
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2019-12-27imx8mq_evk: Update the required ATF branchFabio Estevam
Following the README instructions leads to a non-booting U-Boot: U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300) PMIC: PFUZE100 ID=0x10 DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Trying to boot from MMC2 (It hangs here) Use the "imx_4.19.35_1.0.0" ATF branch instead, which fixes such problem and allow the boot to complete again. Suggested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-12-27pfuze: Fix the pmic_get() parameter in the DM caseFabio Estevam
Currently the following hang is observed when booting a imx6sx-sdb board: U-Boot 2020.01-rc5-00004-g643366bcd5 (Dec 19 2019 - 14:56:23 -0300) CPU: Freescale i.MX6SX rev1.0 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 32C Reset cause: POR Model: Freescale i.MX6 SoloX SDB RevB Board Board: MX6SX SABRE SDB revA DRAM: 1 GiB initcall sequence bffd8514 failed at call 87804cc0 (err=-19) ### ERROR ### Please RESET the board ### When pmic_get() is used with DM the first parameter must be the complete node name plus the unit address. Fix the pmic_get() parameter to fix the boot regression. Tested on a imx6sx-sdb and imx6q-sabresd boards. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-12-26armv8: ls1028ardb: enable DisplayPort Power supportWen He
Enable DP_PWR signal to power the DP to HDMI converter cable. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26armv8: ls1046afrwy: Fix get_board_version implementationPramod Kumar
Current implementation to get board version through GPIO is broken due to endianness issue hence it is not working for rev B board. Fix it to make it work for Rev A as well as Rev B boards Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-15dm: gpio: Allow control of GPIO uclass in SPLSimon Glass
At present if CONFIG_SPL_GPIO_SUPPORT is enabled then the GPIO uclass is included in SPL/TPL without any control for boards. Some boards may want to disable this to reduce code size where GPIOs are not needed in SPL or TPL. Add a new Kconfig option to permit this. Default it to 'y' so that existing boards work correctly. Change existing uses of CONFIG_DM_GPIO to CONFIG_IS_ENABLED(DM_GPIO) to preserve the current behaviour. Also update the 74x164 GPIO driver since it cannot build with SPL. This allows us to remove the hacks in config_uncmd_spl.h and Makefile.uncmd_spl (eventually those files should be removed). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-03mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-02Merge branch '2019-12-02-master-imports'Tom Rini
- A large series of clean-ups to reduce common.h contents
2019-12-02common: Move old EEPROM functions into a new headerSimon Glass
These functions do not use driver model but are still used. Move them to a new eeprom.h header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move pci_init_board() out of common.hSimon Glass
This function can be dropped when all boards use driver model for PCI. For now, move it into init.h with a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move enable/disable_interrupts out of common.hSimon Glass
Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some CPU functions out of common.hSimon Glass
These functions belong in cpu_func.h since they do not use driver model. Move them over. Don't bother adding comments since these functions should be deleted. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Move strtomhz() to vsprintf.hSimon Glass
At present this function sits in its own file but it does not really justify it. There are similar string functions in vsprintf.h, so move it there. Also add the missing function comment. Use the vsprintf.h include file explicitly where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- fsl-qoriq : Minor bug fixes and updates on lx2160a, ls1028a, ls1012a, ls1043aqds platforms
2019-11-29board: fsl: lx2160a: Fix the typo in board_fix_fdtPankaj Bansal
Fix a typo that caused incorrect reg-name for pcie node in lx2160a rev2. Fixes: 5d535aa40b ("board: fsl: lx2160a: implement board_fix_fdt") Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-28Merge tag 'mmc-11-27-2019' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc - fsl_esdhc update and some cleanup in ls1021a/mpc83xx code - mmc tmio sdhi update for hs400
2019-11-27arm: ls1021a: drop redundant board_mmc_init()Yangbo Lu
The board_mmc_init() defined in board files is actually doing same thing with the cpu_mmc_init() defined in arch/arm/cpu/armv7/ls102xa/cpu.c. So drop it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25board: sdhc: Use block layer to read from mmcYinbo Zhu
Use block layer to read from mmc Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-20env: Finish migration of common ENV optionsTom Rini
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20T1042RDB_PI_NAND_SECURE_BOOT: Guard t104xrdb SPL env codeTom Rini
We can only configure and set the environment in SPL when we have a particular environment location set that is not "nowhere" like it is in SECURE_BOOT designs. Update the code to reflect that. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-20fsl: layerscape: guard *env_sf_get_env_addr() on CONFIG_ENV_IS_IN_SPI_FLASHTom Rini
These functions can only be built and used when we have ENV_IS_IN_SPI_FLASH, use that as a guard. Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12Merge tag 'u-boot-imx-20191105' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191105 ------------------- i.MX8MN SoC support ROM API image download support i.MX8MM enet enabling
2019-11-08freescale/powerpc: Rename the config CONFIG_SECURE_BOOT nameUdit Agarwal
Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid conflicts with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08freescale/layerscape: Rename the config CONFIG_SECURE_BOOT nameUdit Agarwal
Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08armv8: lx2160a: add icid setup for platform devicesLaurentiu Tudor
Add ICID setup for the platform devices contained on this chip: usb, sata, sdhc, sec. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08armv8: ls2088a: add icid setup for platform devicesLaurentiu Tudor
Add ICID setup for the platform devices contained on this chip: usb, sata, sdhc, sec. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-05imx: imx8mm-evk: enable ethernetPeng Fan
add phy-reset-gpios to reset phy Add board_phy_config to configure phy Enable DM_ETH Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx: add i.MX8MN DDR4 board supportPeng Fan
Support pinctrl/clk/sdhc, include ddr4 timing data. Log: U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) Normal Boot Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) CPU: Freescale i.MX8MNano rev1.0 at 24 MHz Reset cause: POR Model: NXP i.MX8MNano DDR4 EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx8qm: mek: enable dm-spl for pmPeng Fan
with u-boot,dm-spl added for imx8qm-pm node, and SPL_SIMPLE_BUS enabled, the bind and probe code in board file could be removed. Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8mm: evk: enable bd71837 pmicPeng Fan
Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for DRAM and linux suspend voltage requirement. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8m: evk: spl: probe clk in spl early stagePeng Fan
We are going to add i2c pmic support before dram could be used. So we need enable clk driver earlier, so use spl_early_init and move clock controller probe eariler to board_init_f. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-21board/ls1028a: Add call to sec_init()Udit Agarwal
Adds sec_init call to initialise the job ring parameters for secure boot operations. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-14imx: imx8mm_evk: add board_mmc_get_env_devPeng Fan
Add board_mmc_get_env_dev to correctly return devno for mmc env Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-14mx7ulp_evk: Use imx_ddr_size()Fabio Estevam
Use imx_ddr_size() to retrieve the total DDR size instead of passing a hardcoded memory size. imx_ddr_size() calculates the memory size based on the actual MMDC registers values and is useful to detect misconfigurations, so switch to this more robust approach. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-08imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HABStefano Babic
CONFIG_SECURE_BOOT is too generic and forbids to use it for cross architecture purposes. If Secure Boot is required for imx, this means to enable and use the HAB processor in the soc. Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-10-08mx6ulevk: Include SDP boot instructions in READMEBreno Matheus Lima
Add instructions on how to boot mx6ul_14x14_evk_defconfig target using the Serial Download Protocol. Add examples from uuu and imx_usb_loader tools. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08imx8mq: Update the ddrc QoS setting for B1 chipBai Ping
Update the ddrc Qos setting for B1 to align with B0's setting. Correct the initial clock for dram_pll. This setting will be overwrite before ddr phy training. Although there is no impact on the dram init, we still need to correct it to eliminate confusion. Signed-off-by: Bai Ping <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Tested-by: Robby Cai <robby.cai@nxp.com>
2019-10-08imx8: update READMEPeng Fan
After u-boot.cnt is padded to flash.bin automatically by script, no need to burn the image mannually, so drop the step. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-29 18:11:56 +0000