summaryrefslogtreecommitdiff
path: root/board/st/stm32f746-disco
AgeCommit message (Collapse)Author
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move serial functions out of common.hSimon Glass
These functions belong in serial.h so move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-13board: Add STM32F769 SoC, discovery board supportYannick Fertré
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-04-23board: stm32f746-disco: Get MII/RMII phy_mode from DTPatrice Chotard
This is needed to make ethernet work on stm32f746-eval which uses MII mode. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-08-13stm32f7: board: Fix memory initPatrice Chotard
Commit 1473b12ad0b3 ("lib: fdtdec: Update ram_base to store ram start adddress") brings regression on STM32F7 which can't boot. Use fdtdec_setup_mem_size_base() to setup memory base and size. Use fdtdec_setup_memory_banksize() to setup memory bank base and size. Reported-by: Mark Olsson <mark@markolsson.se> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Mark Olsson <mark@markolsson.se> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-19stm32f7: board: add splash screenyannick fertre
Support several pixel format (8bits, 16bits, 24bits & 32bits). Add new file st_logo_data.h which contains logo stmicroelectronics_uboot_logo_8bit_rle.bmp. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-13arch-stm32: Remove stm32_periph.hPatrice Chotard
Remove arch/arm/include/asm/arch-stm32fx/stm32_periph.h as all defines or enums are no more used. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13board: stm32: switch to DM STM32 timerPatrice Chotard
Use available DM stm32_timer driver instead of dedicated mach-stm32/stm32fx/timer.c. Remove all defines or files previously used for timer usage in arch/arm/include/asm/arch-stm32fx and in arch/arm/mach-stm32/stm32fx Enable DM STM32_TIMER for STM32F4/F7 and H7. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()Patrice Chotard
Move SYSCFG clock setup into configure_clocks() instead of calling clock_setup() from board file. As this clock is only needed in case of ethernet enabled and as both stm32f4 and stm32f7 are using the Designware ethernet IP, we use CONFIG_ETH_DESIGNWARE to only enable this clock if needed. Move the RMII setup from board_early_init_f() to board_init() to insure that RMII bit is set only when clock driver is initialized. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28clk: clk_stm32f: Remove STMMAC clock setupPatrice Chotard
Thanks to 'commit ba1f96672522 ("net: designware: add clock support")' we don't need anymore to setup the STMMAC clock in board. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-11-06stm32: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights headers for STM32 related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-07-26ram: stm32: migrate fmc defines in driver filePatrice Chotard
Migrate all FMC defines from arch/arm/include/asm/arch-stm32f7/fmc.h to drivers/ram/stm32_sdram.c This will avoid to add an additionnal arch-stm32xx/fmc.h file when a new stm32 family soc will be introduced. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-26serial: stm32x7: migrate serial struct to driverPatrice Chotard
This allow to remove include/dm/platform_data/serial_stm32x7.h which was included in the past by stm32x7 driver and by stm32f746-disco.c board file. Since patch 42bf5e7c27 "serial: stm32f7: add device tree support" this file is no more needed in board file. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-06-09spl: stm32f7: configure for xip bootingVikas Manocha
With xip booting configuration, we don't need to copy the next image (U-Boot or linux xipimage) from flash to sdram area. Flash memory organization is like this: spl-U-Boot: u-boot-spl.bin : 0x0800_0000 U-Boot : u-boot-dtb.bin : 0x0800_8000 linux : xipImage : 0x0800_8000 It is also possible to have U-Boot binary & linux binaries configured at different addresses of flash memory like U-Boot at 0x0800_8000 & linux xipImage at 0x0800_4000. But in any case, spl-U-Boot needs to be compiled for U-Boot as next binary with SPL_OS_BOOT option disabled. By default, spl is configured to boot linux xipImage. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09spl: stm32f7: add kernel boot supportVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09stm32: stm32f7: add spl build supportVikas Manocha
This commit supports booting from stm32 internal nor flash. spl U-Boot initializes the sdram memory, copies next image (e.g. standard U-Boot) to sdram & then jumps to entry point. Here are the flash memory addresses for U-Boot-spl & standard U-Boot: - spl U-Boot : 0x0800_0000 - standard U-Boot : 0x0800_8000 To compile u-boot without spl: Remove SUPPORT_SPL configuration (arch/arm/mach-stm32/Kconfig) Signed-off-by: Vikas Manocha <vikas.manocha@st.com> [trini: Rework Kconfig logic a bit] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-01dm: gpio: Add live tree supportSimon Glass
Add support for requesting GPIOs with a live device tree. This involves adjusting the function signature for the legacy function gpio_request_by_name_nodev(), so fix up all callers. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes to stm32f746-disco.c: Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-01dm: Use dm.h header when driver mode is usedSimon Glass
This header includes things that are needed to make driver build. Adjust existing users to include that always, even if other dm/ includes are present Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-08stm32f7: stm32f746-disco: read memory info from device treeVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f746: to switch on user LED1 & read user buttonVikas Manocha
All discovery boards have one user button & one user LED. Here we are just reading the button status & switching ON the user LED. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f7: use stm32f7 gpio driver supporting driver modelVikas Manocha
With this gpio driver supporting DM, there is no need to enable clocks for different gpios (for pin muxing) in the board specific code. Need to increase the allocatable area required before relocation from 0x400 to 0xC00 becuase of 10 new gpio devices(& new gpio class) added in device tree. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08stm32f7: use clock driver to enable sdram controller clockVikas Manocha
This patch also removes the sdram/fmc clock enable from board specific code. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f7: use driver model for sdram initializationVikas Manocha
As driver model takes care of pin control configuraion, this patch also removes the sdram/fmc pin configuration. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f7: sdram: move sdram driver code to ram drivers areaVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-03-17ARM: DT: stm32f7: add qspi pin contol nodeVikas Manocha
It also removes the qspi pin configuration done during the board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add ethernet pin contol nodeVikas Manocha
It also removes the ethernet pin configuration done during the board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add pin control node for serial port pinsVikas Manocha
And remove the uart pin configuration from board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17stm32f7: clk: remove usart1 clock enable from board initVikas Manocha
Before clock driver availability it was required to enable usart1 clock for serial init but now with clock driver is taking care of usart1 clock. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17serial: stm32f7: add device tree supportVikas Manocha
This patch adds device tree support for stm32f7 serial driver & removes serial platform data structure. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-28ARM: SPI: stm32: add stm32f746 qspi driverMichael Kurz
This patch adds support for the QSPI IP found in stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
2017-01-28net: stm32: add designware mac glue code for stm32Michael Kurz
This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-28ARM: stm32: use clock setup function defined in clock.cMichael Kurz
Use the clock setup function defined in clock.c instead of setting the clock bits directly in the drivers. Remove register definitions of RCC in rcc.h as these are already defined in the struct in stm32.h Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-01-28ARM: stm32: cleanup stm32f7 filesMichael Kurz
Cleanup stm32f7 files: - use BIT macro - use GENMASK macro - use rcc struct instead of macro additions Add missing stm32f7 register in rcc struct Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Vikas MANOCHA<vikas.manocha@st.com>
2016-07-21Revert "stm32: Change USART port to USART6 for stm32f746 discovery board"Tom Rini
Per Vikas' request, the problem this commit is supposed to be solving is something he doesn't see and further this introduces additional hardware requirements. This reverts commit 4b2fd720a7b2f78c42d1565edf4c67f378c65440. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-14stm32: Change USART port to USART6 for stm32f746 discovery boardToshifumi NISHINAGA
This change is to remove a halt at about 200KiB while sending a large(1MiB) binary to a micro controller using USART1. USART1 is connected to a PC via an on-board ST-Link debugger that also functions as a USB-Serial converter. However, it seems to loss some data occasionally. So I changed the serial port to USART6 and connected it to the PC using an FTDI USB-Serial cable, therefore the transmission was successfully completed. Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14stm32: Add SDRAM support for stm32f746 discovery boardToshifumi NISHINAGA
This patch adds SDRAM support for stm32f746 discovery board. This patch depends on previous patch. This patch is based on STM32F4 and emcraft's[1]. [1]: https://github.com/EmcraftSystems/u-boot Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-02-24stm32: add support for stm32f7 & stm32f746 discovery boardVikas Manocha
This patch adds support for stm32f7 family & stm32f746 board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
generated by cgit (git 2.34.1) at 2024-12-27 10:35:02 +0000