summaryrefslogtreecommitdiff
path: root/board/st
AgeCommit message (Collapse)Author
2020-04-15board: stm32mp1: correct CONFIG_IS_ENABLED usage for LEDPatrick Delaunay
Use the correct macro to test presence CONFIG_LED: replace CONFIG_IS_ENABLED(CONFIG_LED) by CONFIG_IS_ENABLED(LED) Issue see during review unrelated patch "board: stm32mp1: update management of boot-led" http://patchwork.ozlabs.org/patch/1264823/ Cc: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-15configs: stm32mp1: replace STM32MP1_TRUSTED by TFABOOTPatrick Delaunay
Activate ARCH_SUPPORT_TFABOOT and replace the arch stm32mp specific config CONFIG_STM32MP1_TRUSTED by the generic CONFIG_TFABOOT introduced by the commit 535d76a12150 ("armv8: layerscape: Add TFABOOT support"). This config CONFIG_TFABOOT is activated for the trusted boot chain, when U-Boot is loaded by TF-A. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDRPatrick Delaunay
Need to increase the LPDDR2/LPDDR3 the voltage vdd2_ddr: buck2 form 1.2V to 1.25V for 32bits configuration. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24board: stm32mp1: display reference only for STMicroelectronics boardPatrick Delaunay
Display the reference MBxxxx found in OTP49 only for STMicroelectronics boards when CONFIG_CMD_STBOARD is activated. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> # Conflicts: # board/st/stm32mp1/stm32mp1.c
2020-03-24board: stm32mp1: add finished good in board identifier OTPPatrick Delaunay
Update the command stboard to support the updated coding of OTP 59 with finished good. The ST product codification have several element - "Commercial Product Name" (CPN): type of product board (DKX, EVX) associated to the board ID "MBxxxx" - "Finished Good" or "Finish Good" (FG): effective content of the product without chip STM32MP1 (LCD, Wifi, …) - BOM: cost variant for same FG (for example, several provider of the same component) For example - commercial product = STM32MP157C-EV1 - Finished Good = EVA32MP157A1$AU1 Booth information are written on board and these information is also saved in OTP59: bit [31:16] (hex) => Board id, MBxxxx bit [15:12] (dec) => Variant CPN (1....15) bit [11:8] (dec) => Revision board (index with A = 1, Z = 26) bit [7:4] (dec) => Variant FG : finished good (NEW) bit [3:0] (dec) => BOM (01, .... 255) The updated command is: stboard [-y] <Board> <VarCPN> <Revision> <VarFG> <BOM> And the displayed STMicroelectronics board identification is: Board: MB<Board> Var<VarCPN>.<VarFG> Rev.<Revision>-<BOM> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24board: stm32mp1: stboard: lock the OTP after programmingPatrick Delaunay
Lock the OTP used for board identification for the ST boards after programming. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24board: stm32mp1: read OTP in command stboardPatrick Delaunay
Read the value directly from the OTP and no more of the shadows to avoid the need of reboot after stboard command to have correct value. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24board: stm32mp1: update command stboard on misc_write resultPatrick Delaunay
Update management of misc_write, which now return length of data after the commit 8729b1ae2cbd ("misc: Update read() and write() methods to return bytes xfered") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-02doc: add board documentation for stm32mp1Patrick Delaunay
Change plain test README to rst format and move this file in documentation directory. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13board: stm32mp1: change dfu function to staticPatrick Delaunay
Change the dfu functions dfu_otp_read and dfu_pmic_read to static, this patch avoids warning when compiling with W=1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13board: stm32mp1: board: add include for dfuPatrick Delaunay
Add include for dfu, add prototype for set_dfu_alt_info and avoid warning when compiling with W=1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13board: stm32mp1: update readmePatrick Delaunay
Update readme: - list the supported SOC and change family to STM32MP15x - add warning on OTP write and prerequisite: check if MAC address is not yet provisioned. - Use filesize for mmc write command (avoid to write all partition with ${partsize}). ${filesize} and ${partsize} are set by previous load command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-01-20Merge tag 'u-boot-stm32-20200117' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - stm32mp1: split SOC and board and cleanup config
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17stm32mp1: split board and SOC support for STM32MP15x familyPatrick Delaunay
Split the board and SOC support for STM32MP15x family and prepare the introduction of new boards with STM32MP15x. This path define the 2 configurations: - STM32MP15x: STM32MP15x soc support (new) - TARGET_ST_STM32MP15x: STMicroelectronics board support (choice) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-17board: stm32mp1: move CONFIG_ENV_XXX in defconfigPatrick Delaunay
Move CONFIG_ENV_SECT_SIZE and CONFIG_ENV_OFFSET in stm32mp15_*_defconfig for ST board with NOR support (STM32MP15xx-EV1 boards) - CONFIG_SECT_SIZE values = the max supported NOR erase size (256KB) - CONFIG_ENV_OFFSET = offset for NOR (ENV_IS_IN_SPI_FLASH) This Patch prepares the U-Boot support of boards with STM32MP15x SOC not provided by STMicroelectronics. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-17stm32mp1: move stboard command in board/st/common directoryPatrick Delaunay
Move the ST command in board/st/common, as this command is only used by ST board. Prepare the support in U-Boot of boards with STM32MP15x SOC but not STMicroelectronics. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-07stm32mp1: remove copro_state environment variableFabien Dessenne
Since the coprocessor state is tracked in a backup register, there is no more need for tracking it in an environment variable : remove it. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move serial functions out of common.hSimon Glass
These functions belong in serial.h so move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Drop global inclusion of status_led.hSimon Glass
This is only used by a few files so it should not be in the common header. Move it out. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-26stm32mp1: add support for virtual partition readPatrick Delaunay
Add read for OTP and PMIC NVM with alternates on virtual DFU device. Serie-cc: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26stm32mp1: board: add spi nand supportPatrick Delaunay
This patch adds the support of the spi nand device in mtdparts command and in dfu_alt_info. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26stm32mp1: activate SET_DFU_ALT_INFOPatrick Delaunay
Generate automatically dfu_alt_info for the supported device. The simple command "dfu 0" allows to start the dfu stack on usb 0 for the supported devices: - dfu mtd for nand0 - dfu mtd for nor0 - dfu mmc for SDCard - dfu mmc for eMMC - dfu ram for images in DDR The DUF alternate use the "part", "partubi" and "mmcpart" options to select the correct MTD or GPT partition or the eMMC hw boot partition. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-22board: stm32mp1: fixup the usb product id for USB download gadgetPatrick Delaunay
Select the correct USB product id used by the download gadget for ST stm32mp1 boards. The board stm32mp1 select the correct product id, as defined in http://www.linux-usb.org/usb.ids for the STMicroelectronics vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM): - dfu = 0xdf11 : STM Device in DFU mode it is the value used by ROM code and reused for stm32prog command - fasboot = 0x0afb : Android Fastboot device - others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM) Mass Storage Device it is used for UMS command / usb_dnl_ums This patch avoid conflict when the same USB VID/PID is used for ums, fastboot or dfu command (two different protocols associated to the same PID). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-13board: Add STM32F769 SoC, discovery board supportYannick Fertré
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-09-04net: dwc_et_qos: update weak function board_interface_eth_initPatrick Delaunay
Align the board and driver prototype for board_interface_eth_init to avoid execution issue (the interface_type parameter is defined as int or phy_interface_t). To have a generic weak function (it should be reused by other driver) I change the prototype to use directly udevice. This prototype is added in netdev.h to allow compilation check and avoid warning when compiling with W=1 on file board/st/stm32mp1/stm32mp1.c warning: no previous prototype for 'board_interface_eth_init'\ [-Wmissing-prototypes] int board_interface_eth_init(int interface_type, .... ^~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-27stm32mp1: update README for remoteproc supportPatrick Delaunay
Add information for remoteproc usage to load firmware in M4 coprocessor on stm32mp157. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: add example files for FIT generationPatrick Delaunay
Add example of its files to generate FIT to start kernel on ev1 or dk2 board with - only kernel and dtb = fit_copro_kernel_dtb.its - kernel, M4 copro firmware and dtb = it_copro_kernel_dtb.its Add extlinux example to manage config in generated FIT. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: Add copro image support for M4 firmwarePatrick Delaunay
Implements copro image loading with FIT. Once image is loaded with remoteproc, the M4 coprocessor is automatically started. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board update command stboard on misc_read resultPatrick Delaunay
Update management of misc_read, which now return length of data after the commit 8729b1ae2cbd ("misc: Update read() and write() methods to return bytes xfered") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: update sysconf_init on misc_read resultPatrick Delaunay
Update management of misc_read in sysconf_init, which now return length of data after the commit 8729b1ae2cbd ("misc: Update read() and write() methods to return bytes xfered") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: update test on misc_read resultPatrick Delaunay
Update the stm32mp1 baord after the commit 8729b1ae2cbd ("misc: Update read() and write() methods to return bytes xfered") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARDPatrick Delaunay
Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: cosmetic: cleanup filePatrick Delaunay
- reorder include files - remove one comment Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: remove board_check_usb_power when ADC is not activatedPatrick Delaunay
Avoid compilation issue when CONFIG_ADC is not activated Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: Update the way vdd-supply is retrieved from DTPatrick Delaunay
Due to kernel DT alignment, pwr-supply is renamed to vdd-supply and is a subnode of pwr-regulators. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: check the boot-source to disable bootdelayPatrick Delaunay
Allows to avoid to wait 2 second in U-Boot before to start STM32CubeProgrammer command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: protect the led function callsPatrick Delaunay
Avoid compilation issue when CONFIG_LED is not activated Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: support of error led on ed1/ev1 boardPatrick Delaunay
Create a function led_error_blink and add node in device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 bootPatrick Delaunay
As for Audio codec IC, HDMI IC is not "IO safe". HDMI regulators (v3v3 and v1v2) must be enabled to allow I2C1 bus usage. HDMI IC must be under reset during power up and keep HDMI and AUDIO devices in reset while they are not used in U-Boot to keep them in low power mode (each device can be kept in reset independently keeping their power supplies ON until kernel). Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: add environment variable for board id and board revPatrick Delaunay
Add variable to identify board with HW id (read from OTP) and revision. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stpmic1: program pmic to keep only the debug unit onPatrick Delaunay
Depending on backup register value, we maintain the debug unit powered-on for debugging purpose. Only BUCK1 is required for powering the debug unit, so revert the setting for all the other power lanes, except BUCK3 that has to be always on. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-11env: Rename environment.h to env_internal.hSimon Glass
This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Move env_get_f() to env.hSimon Glass
Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-12board: st: add missing gpio_request() for stm32f429-discoveryPatrice Chotard
This fixes the following error message: U-Boot 2019.07-rc4-00103-g5eea874b5e (Jun 25 2019 - 15:09:31 +0200) DRAM: 8 MiB gpio@40021800: dir_output: error: gpio GPIOG14 not reserved gpio@40021800: dir_output: error: gpio GPIOG13 not reserved gpio@40021800: set_value: error: gpio GPIOG14 not reserved Flash: 2 MiB .... Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-12board: stm32mp1: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: warning: no previous prototype for 'board_quiesce_devices' [-Wmissing-prototypes] void board_quiesce_devices(void) ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2024-12-28 22:39:15 +0000