summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2018-05-26stm32mp1: Allow to activate CONFIG_DEBUG_UARTPatrick Delaunay
Add the needed information to enable the debug uart to have printf before the serial driver probe (so before probe for clock, pincontrol and reset drivers) To enable the debug on uart 4 (default console): + CONFIG_DEBUG_UART=y + CONFIG_DEBUG_UART_STM32=y Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-26ARM: qemu-arm: Bump RAM size in AArch64 MMU tableTuomas Tynkkynen
Now that PCI devices work with highmem-enabled QEMU emulation, bump up the RAM size in the MMU tables to gain access to the full 255 GB of RAM potential instead of the puny 3 GB. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-25tpm: disociate TPMv1.x specific and generic codeMiquel Raynal
There are no changes in this commit but a new organization of the code as follow. * cmd/ directory: > move existing code from cmd/tpm.c in cmd/tpm-common.c > move specific code in cmd/tpm-v1.c > create a specific header file with generic definitions for commands only called cmd/tpm-user-utils.h * lib/ directory: > move existing code from lib/tpm.c in lib/tpm-common.c > move specific code in lib/tpm-v1.c > create a specific header file with generic definitions for the library itself called lib/tpm-utils.h * include/ directory: > move existing code from include/tpm.h in include/tpm-common.h > move specific code in include/tpm-v1.h Code designated as 'common' is compiled if TPM are used. Code designated as 'specific' is compiled only if the right specification has been selected. All files include tpm-common.h. Files in cmd/ include tpm-user-utils.h. Files in lib/ include tpm-utils.h. Depending on the specification, files may include either (not both) tpm-v1.h or tpm-v2.h. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix a few more cases of tpm.h -> tpm-v1.h, some Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-23twister: Let SPL load U-Boot from MMCLadislav Michl
MMC is not initialized in SPL, so it cannot load u-boot.img preventing boot from MMC. Also driver specific functions are guarded with generic configuration options which leads to build failures when device driver is not enabled in config. Fix that by using driver specific defines. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Stefano Babic <sbabic@denx.de>
2018-05-20Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-05-20Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2018-05-20ARM: rmobile: Update V2H BlancheMarek Vasut
The V2H Blanche port was broken since some time. This patch updates the V2H Blanche port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-18Fixup various SPDX tags from the latest mergeTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-18arm64: zynqmp: Use DWC3 generic driver and DM_USBMichal Simek
Remove harcoded XHCI lists and detect mode, speed based on DT. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Serial-changes: 2 - Remove also XHCI macros from hardware.h - Remove additional new line in zcu106
2018-05-18arm: imx53: Add support for imx53 boards from K+PLukasz Majewski
This commit adds support for DDC and HSC boards from K+P in u-boot. Console output: U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: WDOG Model: K+P iMX53 DRAM: 512 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial Out: serial Err: serial Module EEPROM: ID: TQMa53-CB.0401 SN: 63152762 MAC: 00:0b:64:03:14:2a BBoard:40x0 Rev:10 Net: eth0: ethernet@63fec000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-18configs: imx6dl-mamoj: Add Falcon mode supportJagan Teki
Add Falcon mode support to boot Linux directly after SPL. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18configs: imx6dl-mamoj: Add DFU supportJagan Teki
Add DFU support for BTicino Mamoj board and update the same steps in README. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18i.MX6: board: Add BTicino i.MX6DL Mamoj initial supportJagan Teki
Add initial support for i.MX6DL BTicino Mamoj board. Mamoh board added: - SPL - SPL_DM - SPL_OF_CONTROL - DM for U-Boot proper - OF_CONTROL for U-Boot proper - eMMC - FEC - Boot from eMMC - Boot from USB SDP Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-splJagan Teki
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6UL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-splJagan Teki
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6QDL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-17board: ge: bx50v3: remove redundant targetsIan Ray
This replaces TARGET_GE_B{4,6,8}50V3 with common TARGET_GE_BX50V3. The boards are identified automatically at runtime. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: configure video arguments using VPDIan Ray
Configure video arguments at run-time instead of at compile-time. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: use VPD instead of compile-time checksIan Ray
B{46}50v3s have an internal LCD that needs to be configured, in comparison with B850v3 which has only external displays. Use VPD instead of `CONFIG_TARGET_GE_B{4,6,8}50V3' compile-time checks to correct initialize video based on the monitor type. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: detect the monitor type by reading VPD earlierNandor Han
Move the VPD reading earlier in order to establish the monitor type as soon as possible. The configuration of the specific environment variables needs to be done later after the environment is configured. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: fix display support for b{46}50v3Ian Ray
Enable Video PLL to fix non-working display support for Bx50v3 internal displays. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: unify two switch statementsNandor Han
Simplify process_vpd() by unifying the switch statements handling product specific configurations. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: rename detect_baseboard functionIan Ray
The detect_baseboard() function actually determines whether there is an internal LCD panel or not. Rename for clarity. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-14ARM: mvebu: a38x: restore support for setting timingChris Packham
This restores support for configuring the timing mode based on the ddr_topology. This was originally implemented in commit 90bcc3d38d2b ("driver/ddr: Add support for setting timing in hws_topology_map") but was removed as part of the upstream sync. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14ARM: mvebu: a38x: sync ddr training code with upstreamChris Packham
This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14arm64: mvebu: Add basic support for the Turris Mox boardMarek Behún
This adds basic support for the Turris Mox board from CZ.NIC, which is currently being crowdfunded on Indiegogo. Turris Mox is as modular router based on the Armada 3720 SOC (same as EspressoBin). The basic module can be extended by different modules. The device tree binary for the kernel can be dependent on which modules are connected, and in what order. Because of this, the board specific code creates in U-Boot a variable called module_topology, which carries this information. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-11Merge git://git.denx.de/u-boot-tegraTom Rini
2018-05-11SPDX: Correct SPDX tags from recent xilinx mergeTom Rini
Correct the SPDX tag format. Fixes: 3b52847a451a ("Merge tag 'xilinx-for-v2018.07' of git://www.denx.de/git/u-boot-microblaze") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-11Merge tag 'xilinx-for-v2018.07' of git://www.denx.de/git/u-boot-microblazeTom Rini
Xilinx changes for v2018.07 microblaze: - Align defconfig zynq: - Rework fpga initialization and cpuinfo handling zynqmp: - Add ZynqMP R5 support - Wire and enable watchdog on zcu100-revC - Setup MMU map for DDR at run time - Show board info based on DT and cleanup IDENT_STRING zynqmp tools: - Add read partition support - Add initial support for Xilinx bif format for boot.bin generation mmc: - Fix get_timer usage on 64bit cpus - Add support for SD3.0 UHS mode nand-zynq: - Add support for 16bit buswidth - Use address cycles from onfi params scsi: - convert ceva sata to UCLASS_AHCI timer: - Add Cadence TTC for ZynqMP r5 watchdog: - Minor cadence driver cleanup
2018-05-11Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-05-11mmc: zynq_sdhci: Add support for SD3.0Siva Durga Prasad Paladugu
This patch adds support of SD3.0 for ZynqMP. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11arm: zynqmp: Add ZynqMP minimal R5 supportMichal Simek
Xilinx ZynqMP also contains dual Cortex R5 which can run U-Boot. This patch is adding minimal support to get U-Boot boot. U-Boot on R5 runs out of DDR with default configuration that's why DDR needs to be partitioned if there is something else running on arm64. Console is done via Cadence uart driver and the first Cadence Triple Timer Counter is used for time. This configuration with uart1 was tested on zcu100-revC. U-Boot 2018.05-rc2-00021-gd058a08d907d (Apr 18 2018 - 14:11:27 +0200) Model: Xilinx ZynqMP R5 DRAM: 512 MiB WARNING: Caches not enabled MMC: In: serial@ff010000 Out: serial@ff010000 Err: serial@ff010000 Net: Net Initialization Skipped No ethernet found. ZynqMP r5> There are two ways how to run this on ZynqMP. 1. Run from ZynqMP arm64 tftpb 20000000 u-boot-r5.elf setenv autostart no && bootelf -p 20000000 cpu 4 disable && cpu 4 release 10000000 lockstep or cpu 4 disable && cpu 4 release 10000000 split 2. Load via jtag when directly to R5 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11arm64: zynqmp: Simplify boot_target variable compositionMichal Simek
Call calloc for space allocation only at one location and include if/else to sprintf. This will simplify run time device adding based on id aliases. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2018-05-11arm64: zynqmp: Setup MMU map for DDR at run timeNitin Jain
This patch fills the MMU map for DDR at run time based on information read from Device Tree or automatically detected from static configuration. The patch is needed because for systems which has for example 1GB of memory but MMU map is 2GB there could be spurious accesses which was seen in past when mapping is not fitting with actual memory installed. Signed-off-by: Nitin Jain <nitin.jain@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11arm64: zynqmp: Wire watchdog internalsMichal Simek
Enable watchdog in full U-Boot. Similar changes were done by: "arm: zynq: Wire watchdog internals" (sha1: e6cc3b25d721c3001019f8b44bfaae2a57255162) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11arm64: zynqmp: Reset FPD Watchdog on zcu100Michal Simek
Low level configuration didn't reset FPD Watchdog that's why accessing it caused u-boot hang. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11arm64: zynqmp: Add new defconfig for zc1275 revBSiva Durga Prasad Paladugu
This patch enables support zc1275 revB board. It has SD added compared to revA. The same configuration will work for RevC boards aswell. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11arm: zynq: Remove checkboard and enable DISPLAY_CPUINFOMichal Simek
Now that showing silicon version is part of the CPU info display, let's remove checkboard(). Note that the generic show_board_info() will still show the DT 'model' property. For instance: U-Boot 2018.05-rc2-00025-g611b3ee0159b (Apr 19 2018 - 11:23:12 +0200) CPU: Zynq 7z045 Silicon: v1.0 Model: Zynq ZC706 Development Board I2C: ready Based on patches from Ariel D'Alessandro <ariel@vanguardiasur.com.ar>, and Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> mini configuration doesn't need to show this information. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11arm: zynq: Rework FPGA initializationMichal Simek
This commit moves the FPGA descriptor definition to mach-zynq, where it makes more sense. Based on patches from Ariel D'Alessandro <ariel@vanguardiasur.com.ar> and Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-10SPDX: Convert a few files that were missed beforeTom Rini
As part of the main conversion a few files were missed. These files had additional whitespace after the '*' and before the SPDX tag and my previous regex was too strict. This time I did a grep for all SPDX tags and then filtered out anything that matched the correct styles. Fixes: 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style") Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-10board/freescale: Remove invalid fsl email addressesFabio Estevam
These fsl email addresses are no longer valid and they do not have a correspondent nxp.com entry. Remove all invalid fsl email addresses and mark the boards as orphan. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-05-10p1022ds: Change Timur's email addressFabio Estevam
timur@freescale.com is not a valid email for quite some time, so change it to Timur's updated email. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Timur Tabi <timur@tabi.org>
2018-05-10bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount ↵Lukasz Majewski
checking This patch is necessary for providing basic bootcount checking in the case of using "falcon" boot mode in that board. It forces u-boot proper boot, when we exceed the number of errors. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2018-05-10apalis_t30: fix optional pcie port reset for reliable pcie operationMarcel Ziswiler
Allow optionally bringing up the Apalis type specific 4 lane PCIe port as well as the PCIe switch as found on the Apalis Evaluation board. In order to avoid violating the PCIe reset timing do this by overriding the tegra_pcie_board_port_reset() function. Note however that both the Apalis type specific 4 lane PCIe port as well as the regular Apalis PCIe port are also left disabled in the device tree by default. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10apalis_t30: fix pcie port 0 and 1 pin muxingMarcel Ziswiler
Fix optional Apalis type specific 4 lane PCIe port 0 and Apalis PCIe port 1 pin muxing. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10apalis-tk1: fix pcie reset for reliable gigabit ethernet operationMarcel Ziswiler
It turns out that the current PCIe reset implementation in the PCIe board init function is not quite working reliably due to PCIe reset timing violations. Fix this by overriding the tegra_pcie_board_port_reset() function. Also allow optionally bringing up the PCIe switch as found on the Apalis Evaluation board. Note however that the Apalis PCIe port is also left disabled in the device tree by default. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-09Merge git://git.denx.de/u-boot-sunxiTom Rini
2018-05-09armv8: ls1088: Update 1900MT/s DDR timing to bring consistencyAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09armv8: ls1088aqds: Enable mdio commands on u-boot promptAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-08ihs_mdio: Make DM-compatibleMario Six
Make the ihs_mdio driver DM-compatible, while retaining the old functionality for not-yet-converted boards. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-05-08ihs_mdio: Encapsulate register accessMario Six
To prepare for DM conversion, encapsulate all register accesses in function calls. Signed-off-by: Mario Six <mario.six@gdsys.cc>
generated by cgit (git 2.34.1) at 2024-12-26 18:17:11 +0000