summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2017-03-23arm64: a37xx: Disable DB configurations on ESPRESSOBin boardKonstantin Porotchkin
Bypass XHCI and AHCi board configuration flow on ESPRESSOBin community board. The community board does not have i2c expander and USB VBUS is always on, so the scan for AHCi and USB devices can be faster without unneded configurations. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-23mvebu: a37xx: Add init for ESPRESSBin Topaz switchKonstantin Porotchkin
Implement the board-specific network init function for ESPRESSOBin community board, setting the on-board Topaz switch port to forward mode and allow network connection through any of the available Etherenet ports. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-23arm64: a37xx: Handle pin controls in early board initKonstantin Porotchkin
Fix the default pin control values in a board-specific function on early board init stage. This fix allows the NETA driver to work in RGMII mode until the full-featured pin control driver gets introduced. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-23arm64: mvebu: Rename the db-88f3720 to armada-37xx platformKonstantin Porotchkin
Modify the file names and deifinitions relater to Marvell db-77f3720 board support. Convert these names to more generic armada-37xx platform for future addition of more boards based on the same SoC family. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-20board: ns2: Add support for Broadcom Northstar 2Jon Mason
Add support for the Broadcom Northstar2 SoC and SVK (bcm958712k). The BCM5871X is a series of quad-core 64-bit 2GHz ARMv8 Cortex-A57 processors targeting a broad range of networking applications. Signed-off-by: Jon Mason <jon.mason@broadcom.com>
2017-03-20da850: Add instructions to copy AIS image to NANDahaslam@baylibre.com
Add instructions to write an AIS image to NAND by using the u-boot nand tools. Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
2017-03-20ARM: k2g: setup PRU ethernet MAC addressesRoger Quadros
PRU ethernet MAC address range is present in the board EEPROM. Parse it and setup eth?addr environment variables. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-03-20ARM: Use Kconfig for board EEPROM's I2C bus and chip addressRoger Quadros
In stead of defining the board EEPROM address in the board headers let's define them in the board config files and make them configurable by Kconfig. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-03-20board: ti: am57xx-idk: Auto detect LCD PanelNishanth Menon
AM571x IDK and AM572x IDK have optional LCD Kits that can be purchased. These can be one of OSD101T2045 or the newer OSD101T2587. The LCD panel itself has no registers that can be used to identify the panel, however, the touchscreen controllers on the panels are different. Hence to ease user experience, we can use the touch screen controller's ID information to detect what kind of panel we use and select the appropriate kernel dtb for the platform configuration. NOTE: AM572x IDK default configuration is for LCD Connectivity, however the AM571x IDK has a jumper (J51) that needs to be mounted for the IDK to operate with LCD (Vs two PRUSS ethernet port option). Touchscreen ID information is documented in: http://www.osddisplays.com/TI/OSD101T2587-53TS_A.1.pdf Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-03-20board: ti: am571x-idk: Update pinmux for ICSS2 EthernetRoger Quadros
Use the same convention that was used for ICSS1 Ethernet - If pin is output, set as PIN_OUTPUT - If pin is input and external pull resistor present set as PIN_INPUT - If pin is input and external pull resistor absent, set pull to same as that of the external PHY's internall pull. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-03-20board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCDRoger Quadros
The board can support either ICSS1 Ethernet ports or LCD based on J51 jumper. Factory default is ICSS1 Ethernet ports (i.e. Jumper not populated). Use the GPIO to detect the jumper setting and configure the pinmux accordingly. Also select the right DT blob based on the chosen configuration. J51 absent -> ICSS1 Ethernet, no LCD on VOUT -> am571x-idk.dtb J51 present -> LCD on VOUT, no ICSS1 Ethernet -> am571x-idk-lcd-osd.dtb At present we only support the assume it is the Legacy LCD. LCD detection mechanism needs to be added later to differentiate between legacy vs new LCD. For ICSS1 Ethernet pins use the following convention to set the pinmux as PMT data is not yet finalized. - If pin is output, set as PIN_OUTPUT - If pin is input and external pull resistor present set as PIN_INPUT - If pin is input and external pull resistor absent, set pull to same as that of the external PHY's internall pull. - Do not use SLEW_CONTROLon any pin. Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-03-20ti: common: board_detect: commodify ethaddr environment setting codeRoger Quadros
Keystone and OMAP platforms will need this to set ethernet MAC addresses from board EEPROM. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-03-20ti: common: board_detect: Rename EEPROM scratch start macroLokesh Vutla
Non OMAP platforms i.e. Keystone will also need to use the board EEPROM helpers so let's make the macro platform independent. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-03-19ti: boot: Register the MMC controllers in SPL in the same way as in u-bootJean-Jacques Hiblot
To keep a consistent MMC device mapping in SPL and in u-boot, let's register the MMC controllers the same way in u-boot and in the SPL. In terms of boot time, it doesn't hurt to register more controllers than needed because the MMC device is initialized only prior being accessed for the first time. Having the same device mapping in SPL and u-boot allows us to use the environment in SPL whatever the MMC boot device. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-03-19Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/bk4r1_defconfig configs/colibri_vf_defconfig configs/pcm052_defconfig include/configs/colibri_vf.h include/configs/pcm052.h
2017-03-19imx: ventana: add EMMC configurationTim Harvey
Prepare for boards with EMMC instead of NAND flash Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-19ARM: vf610: move to standard arch/board approachStefan Agner
Move Freescale/NXP Vybrid to a standard arch/board approach, similar to what has been done to i.MX 6 earlier in commit 89ebc82137be ("ARM: mx6: move to a standard arch/board approach"). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-03-19imx: ventana: make SD3_VSELECT board specificTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: make OTG VBUS power enable board specificTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: fix hwconfigTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: change name of rs232_en to indicate polarityTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: move mmc_init to commonTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: add additional DRAM configurationsTim Harvey
- 64bit 8gB density (4GiB) IMX6DQ - 64bit 4gB density (2GiB) IMX6SDL Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19colibri_imx7: use device-tree for MTD partitionsStefan Agner
Use device-tree fixup to communicate the MTD partitions to the kernel. Remove mtdparts from the kernel command line. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-03-19colibri_imx7: setup PMIC sleep mode configurationStefan Agner
Disable 3.3V Ethernet and ARM rail when entering sleep mode. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-03-19colibri_imx7: implement board level USB PHY modeStefan Agner
Implement board level USB PHY mode callback. On USB OTG Port 1 the Colibri standard foresees GPIO USBC_DET to decide whether the port should run in Host or Device mode. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-03-19arm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and OPOS6ULDev carrier boardSébastien Szymanski
OPOS6UL is an i.MX6UL based SoM with 256MB RAM, 4GB eMMC and an ethernet phy. OPOS6ULDev is carrier board for the OPOS6UL. U-Boot SPL 2017.03-rc3-00002-g5085c26 (Mar 07 2017 - 09:48:09) Trying to boot from MMC1 U-Boot 2017.03-rc3-00002-g5085c26 (Mar 07 2017 - 09:48:09 +0100) CPU: Freescale i.MX6UL rev1.0 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 40C Reset cause: POR Model: Armadeus Systems OPOS6UL SoM on OPOS6ULDev board DRAM: 256 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Video: 800x480x18 In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-17Merge git://git.denx.de/u-boot-rockchipTom Rini
This includes support for rk3188 from Heiko Stübner and and rk3328 from Kever Yang. Also included is SPL support for rk3399 and a fix for rk3288 to get it booting again (spl_early_init()).
2017-03-17ARM: DT: stm32f7: add qspi pin contol nodeVikas Manocha
It also removes the qspi pin configuration done during the board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add ethernet pin contol nodeVikas Manocha
It also removes the ethernet pin configuration done during the board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add pin control node for serial port pinsVikas Manocha
And remove the uart pin configuration from board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17stm32f7: clk: remove usart1 clock enable from board initVikas Manocha
Before clock driver availability it was required to enable usart1 clock for serial init but now with clock driver is taking care of usart1 clock. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17serial: stm32f7: add device tree supportVikas Manocha
This patch adds device tree support for stm32f7 serial driver & removes serial platform data structure. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-17arm: imx6: tqma6: add support for TQMa6DL variantMarkus Niebel
This adds support for TQMa6DL using i.MX6DL and 1GiB DRAM Since The module will use the same devicetree, we patch the ram size in ft_board_setup. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settingsMarkus Niebel
We have a Kconfig name for the module types. Let's Use it. Some feature selections and configurations are based on the module. Module selection selects the CPU type. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17i.MX6Q: isiot: Switch the mmc env based on devnoJagan Teki
Add board_mmc_get_env_dev Switch the mmc env based on the mmc devno, instead of separately defining a config item in include/configs using board_mmc_get_env_dev - devno 0: sd/esd - devno 1: mmc/emmc Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6Q: icorem6_rqs: Add mmc_late_initJagan Teki
Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6Q: icorem6_rqs: Add modeboot env via board_late_initJagan Teki
Add runtime, modeboot env which is setting mmcboot based on the bootdevice so-that conditional macros for MMC via CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17imx6: icorem6_rqs: Add eMMC boot supportJagan Teki
Boot from eMMC: -------------- U-Boot SPL 2017.01-00318-g8e243f8 (Jan 26 2017 - 11:53:21) Trying to boot from MMC2 U-Boot 2017.01-00318-g8e243f8 (Jan 26 2017 - 11:53:21 +0100) CPU: Freescale i.MX6D rev1.2 at 792 MHz Reset cause: POR Model: Engicam i.CoreM6 Quad/Dual RQS Starter Kit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial switch to partitions #0, OK mmc1(part 0) is current device Net: No ethernet found. Hit any key to stop autoboot: 0 Booting from mmc ... switch to partitions #0, OK mmc1(part 0) is current device Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17mx6: tqma6: clear enet clk sel for mba6Markus Niebel
we have external ref clock from phy. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: tqma6: adjust ethernet phy reset delayMarkus Niebel
fix the reset delay which was to short Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: tqma6: disable spi CS unused in U-BootMarkus Niebel
Since the CS are not in use, do not map them. User of starterkit mainboard is free to use them otherwise. When using these pins later in the OS for instance as GPIO IRQ pin, they need to be input. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: tqma6: use lower driver stength for I2C pinsMarkus Niebel
The current driver stength is too high, leading to spec violations on the falling edge. Fix it with values from HW Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: tqma6: implement power_init_boardMarkus Niebel
PMIC implements proper I2C bus switching, implement power_init_board instead handling in board_late_init. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: icorem6_rqs: Update SPL board boot order for eMMCJagan Teki
SPL mmc device index is get based on the boot device, like - BOOT_DEVICE_MMC1 for mmc device 0 - BOOT_DEVICE_MMC2 for mmc device 1 Currently BOOT_DEVICE_MMC1 is setting both SD/eSD and MMC/eMMC boot devices in i.MX, So u-boot is loading from mmc device 0 even "if the board booting from SD/eSD or MMC/eMMC" So, this patch set BOOT_DEVICE_MMC2 for MMC/eMMC so for MMC/eMMC the u-boot is loading from mmc device 1 and the board file need to take care if the board have different mmc device order intialization. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6UL: isiot: Switch the mmc env based on devnoJagan Teki
Add board_mmc_get_env_dev Switch the mmc env based on the mmc devno, instead of separately defining a config item in include/configs using board_mmc_get_env_dev - devno 0: sd/esd - devno 1: mmc/emmc Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6UL: isiot: Add mmc_late_initJagan Teki
Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6UL: isiot: Add modeboot env via board_late_initJagan Teki
Add runtime, modeboot env which is setting mmcboot, or nandboot based on the bootdevice so-that conditional macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6UL: isiot: Add eMMC boot supportJagan Teki
Boot from eMMC: -------------- U-Boot SPL 2017.01-00314-gd0cd9cd-dirty (Jan 25 2017 - 13:25:27) Trying to boot from MMC2 U-Boot 2017.01-00314-gd0cd9cd-dirty (Jan 25 2017 - 13:25:27 +0100) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 36C Reset cause: POR Model: Engicam Is.IoT MX6UL eMMC Starterkit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial switch to partitions #0, OK mmc1(part 0) is current device Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17imx6: isiotmx6ul: Update SPL board boot order for eMMCJagan Teki
SPL mmc device index is get based on the boot device, like - BOOT_DEVICE_MMC1 for mmc device 0 - BOOT_DEVICE_MMC2 for mmc device 1 Currently BOOT_DEVICE_MMC1 is setting both SD/eSD and MMC/eMMC boot devices in i.MX, So u-boot is loading from mmc device 0 even "if the board booting from SD/eSD or MMC/eMMC" So, this patch set BOOT_DEVICE_MMC2 for MMC/eMMC so for MMC/eMMC the u-boot is loading from mmc device 1 and the board file need to take care if the board have different mmc device order intialization. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2024-12-29 02:16:49 +0000