summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2010-10-28mx51evk: Fix 2 hours reset issueShawn Guo
The mx51evk u-boot has an issue that system will get reset every 2 hours. MC13892 has an inside charge timer which expires in 120 minutes. If ICHRG and CHGAUTOB are not set properly, this timer expiration will get system power recycled. Since mx51evk has no Li-Ion battery on board, the patch sets ICHRG in externally powered mode and sets CHGAUTOB bit to avoid automatic charging, so that system will not get reset by this timer expiration. The patch also corrects the bit field definition of register 48 (Charger 0) per latest MC13892 Reference Manual. Signed-off-by: Shawn Guo <shawn.gsc@gmail.com>
2010-10-28MX5:use common u-boot.lds of cpu layerJason Liu
Remove u-boot.lds from mx5 and use the common u-boot.lds of cpu layer. This patch also fix the building errors: arch/arm/cpu/armv7/start.o: In function `_rel_dyn_start_ofs': arch/arm/cpu/armv7/start.S:283: undefined reference to `__rel_dyn_start' arch/arm/cpu/armv7/start.o: In function `_rel_dyn_end_ofs': arch/arm/cpu/armv7/start.S:283: undefined reference to `__rel_dyn_end' arch/arm/cpu/armv7/start.o: In function `_dynsym_start_ofs': arch/arm/cpu/armv7/start.S:283: undefined reference to `__dynsym_start' Signed-off-by: Jason Liu <r64343@freescale.com>
2010-10-28MX51: add CONFIG_SYS_TEXT_BASE to vision2 board, use general ld scriptStefano Babic
Recent patch changed TEXT_BASE to CONFIG_SYS_TEXT_BASE and vision2 board was not updated. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-28Add generic support for samsung s3c2440C Nauman
This patch adds generic support for the Samsung s3c2440 processor. Global s3c24x0 changes to struct members converting from upper case to lower case. Signed-off-by: Craig Nauman <cnauman@diagraph.com> Cc: kevin.morfitt@fearnside-systems.co.uk Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-10-27Coding Style cleanupWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-27mcu25: fix out of tree buildingWolfgang Denk
Out of tree building of the Netstal mcu25 board failed like that: Configuring for mcu25 board... Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/mcu25/../common/fixed_sdram.o: No such file or directory Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/mcu25/../common/nm_bsp.o: No such file or directory Adapt (and simplify) the Makefile. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Niklaus Giger <niklaus.giger@netstal.com>
2010-10-26Remove config.mk for da8xxevm based boards.Sughosh Ganu
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the now unnecessary config.mk file. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-10-26Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated valueWolfgang Denk
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZEWolfgang Denk
CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be some end address; to make the meaning more clear we rename it into CONFIG_SYS_INIT_RAM_SIZE No other code changes are performed in this patch, only minor editing of white space (due to the changed length) and the comments was done, where noticed. Note that the code for the PATI and cmi_mpc5xx board configurations looks seriously broken. Last known maintainers on Cc: Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Denis Peter <d.peter@mpl.ch> Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch> Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2010-10-25ppc4xx: Add Io and IoCon 405EP board supportDirk Eibach
Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-24hcu4, hcu5: fix out of tree buildingWolfgang Denk
Out of tree building of the Netstal hcu4 and hcu5 boards failed like that: Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/hcu4/../common/fixed_sdram.o: No such file or directory Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/hcu4/../common/nm_bsp.o: No such file or directory make[1]: *** [/work/wd/tmp-ppc/board/netstal/hcu4/../common/fixed_sdram.o] Error 2 Adapt (and simplify) the respective Makefiles. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Niklaus Giger <niklaus.giger@netstal.com>
2010-10-24lite5200b_PM: fix compile warningWolfgang Denk
Fix warning: icecube.c: In function 'lite5200b_wakeup': icecube.c:83: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'void (*)(void)' Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-23Merge branch 'for-wd-master' of git://git.denx.de/u-boot-pxaWolfgang Denk
2010-10-23Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2010-10-23Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk
2010-10-23Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk
2010-10-22XPedite5500 board supportJohn Schmoller
Initial support for Extreme Engineering Solutions XPedite5500 - a P2020-based PMC/XMC single board computer. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22xes: Make X-ES board names more genericPeter Tyser
Some U-Boot images for X-ES boards support multiple products in the same family. For example, the XPedite5370, XPedite5371, and XPedite5372 are similar enough that one U-Boot image can work on all 3 cards. To make it clear that a U-Boot image can work on boards of the same family, rename the boards with the least significant digit of 'x'. While we're at it, change the board config file and make targets to be lowercase. Also change the default uImage and fdt filenames to "board.uImage" and "board.dtb" to be more generic. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22xes: Add board_flash_wp_on()John Schmoller
Add board_flash_wp_on() to check a pca9557 gpio pin to see if non-volatile memory write protection is enabled. Previously, write protected NOR flashes would fail initialization which resulted in a bootup error such as: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB ## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB *** failed *** ### ERROR ### Please RESET the board ### With this patch, NOR flash initialization is skipped: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: Uninitialized - Write Protect On L2: 1024 KB enabled NAND: 1024 MiB ... Note that flash related commands such as flinfo and saveenv will error out when flash write protection is enabled. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22xes: Consolidate checkboard()John Schmoller
Create a common checkboard() function to support all X-ES's Freescale boards. Also, add a get_board_derivative() function which reads hardware strapping resistors to determine what model a board is. This allows one U-Boot image to support multiple boards. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22xes: Use common PCI initialization codePeter Tyser
Common Freescale code for PCI initialization now exists, so migrate X-ES boards to use it. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22PXA: Remove "xsengine" boardMarek Vasut
This board is broken and it's not possible to repair it. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: Remove "wepep250" boardMarek Vasut
This board is broken and impossible to repair without deep knowledge or availability of the hardware. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: Remove "delta" boardMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: xm250: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: xaeniax: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: trizepsiv: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: pxa255_idp: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: pleb2: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: palmtc: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: palmld: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: lubbock: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: innokom: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: csb226: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: cradle: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: colibri_pxa270: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22PXA: cerf250: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-22MX51: Add video support to vision2 boardStefano Babic
The patch adds support for LCD to the vision2 board. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-21a4m072: change 'display' command implementationIlya Yanok
This patch changes implementation of 'display' command for a4m072 that uses 7-segment LED display as customer requested: a) The "display" command shall _not_ turn on the decimal point. b) Exception: "display ." shall turn on (only) the decimal point. c) Hex digits (0-9, A-F, a-f) shall be displayed as usual. d) Letters U, P, Y, L, S, T, H shall be displayed as usual (lower case letters identical to upper case letters) e) 'I' (and 'i') shall be displayed like '1' f) 'O' (and 'o') shall be displayed like '0' g) all other Characters shall be displayed like ' ' (all segments off). Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2010-10-21sh: sh7785lcr: Add CONFIG_SYS_TEXT_BASE for 32bit modeNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2010-10-20Devkit8000: Adapt changes to ARM relocation supportThomas Weber
Fix compilation of Devkit8000 after introduction of ARM relocation support. Signed-off-by: Thomas Weber <weber@corscience.de> Adapt to TEXT_BASE => CONFIG_SYS_TEXT_BASE rename. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-20Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2010-10-20Kirkwood: bugfix: broken early console messagesPrafulla Wadaskar
It has been observed that, the complete u-boot banner does not appear on the console when the system is booted from NAND/NOR/SPI flash. This patch fixes this issue on all Marvell boards by adding board_early_init_f() support Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-10-20arm926ejs, suen3: fix relocation issuesHeiko Schocher
- use internal 2k security SRAM as RAM for early stack. - do early inits in board_init_f() Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com>
2010-10-20ppc4xx: Enable NOR flash support in sequoia_ramboot targetStefan Roese
Until now, the Sequoia RAM-booting image disabled NOR flash support as this image was mainly created for NAND-only boards. This patch now enables NOR flash support for this RAM-booting version as well. Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-2086xx: Create common linker scriptKumar Gala
Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-20tqm85xx: Update PCI codePeter Tyser
Update to use the recent, common FSL PCI initialization code. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: sr@denx.de Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-20sbc8641d: Update PCI codePeter Tyser
Update to use the recent, common FSL PCI initialization code. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: joe.hamman@embeddedspecialties.com Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-20mpc8641hpcn: Update PCI codePeter Tyser
Update to use the recent, common FSL PCI initialization code. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit (git 2.34.1) at 2024-12-28 14:53:25 +0000