summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2020-07-28Makefile: Rename ALL-y to INPUTS-ySimon Glass
When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27Merge tag 'dm-pull-20jul20-take2a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-27configs:ls1046afrwy: Add tfa secure boot defonfigManish Tomar
Add TFA secure boot defconfig and Enables secure boot related configs in it. Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27freescale: ls1043aqds: drop ifdef CONFIG_SYS_I2CBiwen Li
- Drop ifdef CONFIG_SYS_I2C to initialize baudrate of i2c - Drop warning of i2c_early_init_f as follows, warning: implicit declaration of function 'i2c_early_init_f'; did you mean 'arch_early_init_r'? [-Wimplicit-function-declaration] Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27freescale: ls1043aqds: enable secure system counterBiwen Li
Enable secure system counter in board_early_init_f for udelay() to fix a bug that always return 0 by timer_read_counter() when boot from qspi(No TFA) Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27freescale: ls1046aqds: drop ifdef CONFIG_SYS_I2CBiwen Li
- Drop ifdef CONFIG_SYS_I2C to initialize baudrate of i2c - Drop warning of i2c_early_init_f as follows, warning: implicit declaration of function 'i2c_early_init_f'; did you mean 'arch_early_init_r'? [-Wimplicit-function-declaration] Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27freescale: ls1046aqds: enable secure system counterBiwen Li
Enable secure system counter in board_early_init_f for udelay() to fix a bug that always return 0 by timer_read_counter() when boot from qspi(No TFA) Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27board: fsl: lx2160aqds: identify SDHC adapter during board initYangbo Lu
Add support for SDHC adapter identification and configuration during board init. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27Move eSDHC adapter card identification to board filesYangbo Lu
The eSDHC adapter card identification and multiplexing configuration through FPGA had been implemented in both common mmc driver and fsl_esdhc driver. However it is proper to move these code to board files and do it during board initialization. The FPGA registers are also board specific. This patch is to move eSDHC adapter card identification and multiplexing configuration from mmc driver to specific board files. And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [Rebased, Removed T1040QDS change as board does not exist] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27armv8: ls1028ardb: add xspi parameter to qixis commandYuantian Tang
Add xspi boot source to qixis command to let the soc boot from flex-nor flash chip. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27armv8: ls1012a: RGMII ports require internal delayChaitanya Sakinam
The correct setting for the RGMII ports on LS1012ARDB is to enable delay on both Rx and Tx so the interface mode used should be PHY_INTERFACE_MODE_RGMII_ID Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> Signed-off-by: Anji J <anji.jagarlmudi@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-25ARM: rmobile: Switch back to fdtdec_setup_memory/banksize_fdt()Michal Simek
The commit 361377dbdbc9 ("ARM: rmobile: Merge prior-stage firmware DT fragment into U-Boot DT on Gen3") reverted changes introduced by commit 175f5027345c ("ARM: renesas: Configure DRAM size from ATF DT fragment") that's why there is no reason to use functions with _fdt() suffix because parameter is gd->fdt_blob as is already for functions without _fdt() suffix. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev KitAdam Ford
The Beacon EmbeddedWorks kit is based on the R8A774A1 SoC also known as the RZ/G2M. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-24Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Fix SiFive HiFive Unleashed board booting failure problem. - Enable SiFive fu540 PWM driver. - Support SiFive fu540: SPI boot. - Update OpenSBI used for RISC-V CI testing. - Revert "riscv: Allow use of reset drivers". - Revert "Revert "riscv: sifive: fu540: Add gpio-restart support"". - sysreset: syscon: - Don't assume default value for offset and mask property. - Support value property. - qemu: Add syscon reboot and poweroff support. - Fix SIFIVE debug serial dependency. - Fix linking error when building u-boot-spl with no SMP support. - AE350 use fdtdec_get_addr_size_auto_noparent to parse smc reg. - Make memory node available to SPL in hifive-unleashed-a00-u-boot.dtsi - SiFive fu540 avoid using hardcoded ram base and size.
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24riscv: ae350: Use fdtdec_get_addr_size_auto_noparent to parse smc regRick Chen
Use fdtdec_get_addr_size_auto_noparent to read the "reg" property instead of fdtdec_get_addr. This will increase the compatibility of dtb parsing. Signed-off-by: Rick Chen <rick@andestech.com> Acked-by: Leo Liang <ycliang@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Leo Liang <ycliang@andestech.com>
2020-07-24riscv: qemu: Add syscon reboot and poweroff supportBin Meng
This adds syscon reboot and poweroff support to QEMU RISC-V. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-24Revert "Revert "riscv: sifive: fu540: Add gpio-restart support""Bin Meng
This reverts commit 23da3c682a84a2ad67a67287979dd4f5259ff607. Now the build failure of sifive_fu540_defconfig board has been fixed, revert this "revert patch". Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-07-24sifive: fu540: Mark the default env as SPI flashJagan Teki
Mark the default U-Boot environment as SPI flash since this is an on board flash device. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-24sifive: fu540: Add runtime boot mode detectionJagan Teki
Add support to detect boot mode at runtime for SiFive FU540 boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-24riscv: sifive: fu540: Enable SiFive PWM driverPragnesh Patel
This patch enables SiFive PWM driver for the SiFive Unleashed board. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-07-23Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dmTom Rini
binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-22Merge tag 'u-boot-rockchip-20200722' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - New rk3326 board: Hardkernel Odroid Go2; - Update board config and dts for RockPI 4/N8/N10; - Update led boot on support for roc-rk3399-pc; - Enable SPI Flash suppor for rk3328 rock64 board; - Update rockchip pcie phy to use generic framework;
2020-07-22rockchip: roc-rk3399-pc: Set LED only during POR and pwr_key=yJagan Teki
ROC-RK3399-PC has specific set of configurations for on-board led setup. Due to easiness for user to know the state of the board roc-rk339-pc board code will setup the low power led on/off, and waiting for user to press power key and then glow full power led. All this needs to happen only during power-on-reset not for soft reset or WDT. Also, it is not a proper usage to ask the user to press the Power key if the board connected remotely, so add the environment variable 'pwr_key' to check as well. So, user need to press Power key only - during POR - pwr_key=y Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: roc-rk3399-pc: Add custom led_setup()Jagan Teki
roc-rk3399-pc has some specific requirements to support LEDS, environment. board detection and etc prior to U-Boot proper. So as of now SPL would be a better stage for these custom board requirements to support unlike TPL. Adding few of these custom requirements like LEDS in TPL would require extra code pulling and also the size of TPL can grow. So, this patch moves the leds code from TPL into SPL Board init led_setup code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (split tpl.c change as separate patch) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add Radxa ROCK Pi 4C supportJagan Teki
Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C. So, add or enable difference nodes/properties in 4C dts by including common dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: board: add Hardkernel Odroid Go2 boardHeiko Stuebner
Also known as Odroid Go Advance but named Go2 internally by the vendor it seems. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-20ARM: rmobile: Switch back to fdtdec_setup_memory/banksize_fdt()Michal Simek
The commit 361377dbdbc9 ("ARM: rmobile: Merge prior-stage firmware DT fragment into U-Boot DT on Gen3") reverted changes introduced by commit 175f5027345c ("ARM: renesas: Configure DRAM size from ATF DT fragment") that's why there is no reason to use functions with _fdt() suffix because parameter is gd->fdt_blob as is already for functions without _fdt() suffix. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-18mips: octeon: Add minimal Octeon 3 EBB7304 EVK supportStefan Roese
This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-17board/km: update MAINTAINERS emailHolger Brunck
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
2020-07-17treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17Merge tag 'u-boot-imx-20200716' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2020.10 ---------------- - i.MX DDR driver fix/update for i.MX8M - i.MX pinctrl driver fix. - Use arm_smccc_smc to remove imx sip function - i.MX8M clk update - support booting aarch32 kernel on aarch64 hardware - fused part support for i.MX8MP - imx6: pcm058 to DM Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/708734785
2020-07-16arm: Add extra boot device (UART) to run Ymodem u-boot.img boot on XEA (imx28)Lukasz Majewski
This commit enables imx28 based XEA board's u-boot.sb (SPL) to download u-boot proper (u-boot.img) via Ymodem protocol. This is extremely useful in the recovery scenario where u-boot.sb is downloaded via uuu utility to SDRAM [*], and then one can upload u-boot proper via serial console to fully debrick the device. Note - debricking procedure of imx28 devices: - NXP's original USB based tools (like mxsldr or uuu) expect single u-boot.sb which is a relic of the old U-Boot (~2013) without SPL and U-Boot proper distinction. [*] On Host: ------------ cat << EOF > imx28_xea.lst uuu_version 1.3.0 SDPS: boot -f /srv/tftp/xea/u-boot.sb SDPU: done EOF Please start picocom: sudo picocom -b 115200 -s "sz -vv" /dev/ttyUSB1 sudo ./uuu/uuu -V imx28_xea.lst On the U-boot console one shall see: Trying to boot from UART CCC Then please press CTRL+A, S and type u-boot.img Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-07-16power: pmic_pca9450: fix PCA9450A I2C addressSébastien Szymanski
Quoting Ye Li from NXP: "We have confirmed with PMIC team, 0x35 is used only on early chips and not used any more. 0x25 is the final address." Fix it by merging power_pca9450a_init and power_pca9450b_init into one function power_pca9450_init. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-07-16pico-imx6ul: Fix Quick Start Guide URLFabio Estevam
The current URL for the pico imx6ul board is not valid anymore. Change to a different URL that works. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-07-14arm: imx6q: pcm058: Convert pcm058 to use DM with DTsNiel Fourie
Convert pcm058 support to use device trees and the driver model. Add rudimentary boot scripts to the environment, expand README. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-14arm: imx6q: pcm058: change MAINTAINERNiel Fourie
Change the MAINTAINER of pcm058. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-14imx8m: Refactor the OPTEE memory removalPeng Fan
Current codes assume the OPTEE address is at the end of first DRAM bank. Adjust the process to allow OPTEE in the middle of first bank. When OPTEE memory is removed from first bank, it may split the first bank to two banks, adjust the MMU table for the split case, Since the default CONFIG_NR_DRAM_BANKS is 4, it is enough, just enlarge i.MX8MP evk to default to avoid issue. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Silvano di Ninno <silvano.dininno@nxp.com> Tested-by: Silvano di Ninno <silvano.dininno@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8mp: Disables use of MR4 TUF flag (MR4[7]) bitJian Li
In uMCTL2 Databook, for LPDDR4, it is recommended to set this register to 1. This can avoid ddr bandwidth is lower after booting with running for a while. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Jian Li <jian.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8mp: DDR performance tunningJian Li
1. set SCHED.rdwr_idle_gap=0 2. set SCHED.pageclose=1 Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Jian Li <jian.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8mp: enable rd_port_urgentJian Li
Need to enable read urgent for NoC panic signal Signed-off-by: Jian Li <jian.li@nxp.com Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-13omap3_beagle: Finish current outstanding DM migrationsTom Rini
At this point in time we can now remove our legacy code and switch to enabling DM for USB and Ethernet. Cc: Derald D. Woods <woods.technical@gmail.com> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2020-07-13ARM: da850-evm: Unify config options with KconfigAdam Ford
There are two options that are currently whitelisted, but they are redundant, because there are not necessary since Kconfig options exist to basically state the same thing. CONFIG_DIRECT_NOR_BOOT and CONFIG_USE_NOR are both set together and only used by the da850 when booting from NOR, however the only time CONFIG_MTD_NOR_FLASH is configured is when booting from NOR. Since NOR doesn't need SPL, the options for SPL can be moved to a check for building SPL instead of checking for NOR. This patch removes the checks for these two config options and unifies the checks around the Kconfig option of CONFIG_MTD_NOR_FLASH. Since this board is the only board that uses these two config options, they can be removed from the whitelist table. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-11Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- Enable DM_SPI on siemens omap boards (Jagan) - Dropped some non-dm supported omap3 boards (Jagan) - Dropped non-dm code in omap3 spi driver (Jagan) - Dropped non-dm code in kirkwood spi driver (Bhargav)
2020-07-09drivers: rename drivers to match compatible stringWalter Lozano
When using OF_PLATDATA, the bind process between devices and drivers is performed trying to match compatible string with driver names. However driver names are not strictly defined, and also there are different names used when declaring a driver with U_BOOT_DRIVER, the name of the symbol used in the linker list and the used in the struct driver_info. In order to make things a bit more clear, rename the drivers names. This will also help for further OF_PLATDATA improvements, such as checking for valid driver names. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Add a fix for sandbox of-platdata to avoid using an invalid ANSI colour: Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09arm: Remove mx31pdk boardJagan Teki
DM, OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09arm: Remove pengwyn boardJagan Teki
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09arm: Remove pepper boardJagan Teki
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Ash Charles <ash@gumstix.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09arm: Remove bav335x boardJagan Teki
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Gilles Gameiro <gilles@gigadevices.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2024-12-23 18:20:46 +0000