summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2019-02-09samsung: mmc: Drop old MMC init codeSimon Glass
Now that these boards use driver model we can drop the old code. At present s5p_mmc_init() is still used by goni and smdkv310 so cannot be removed unless we remove those boards. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2019-02-09samsung: Drop board_enable_audio_codec()Simon Glass
This function is not needed now since the audio codecs have been converted to proper drivers. The codec-enable GPIO is handled there. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2019-02-09exynos: Drop duplicate 'model' lineSimon Glass
At present the model is shown twice, once in the generic code and once in the exynos code. Drop the latter. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2019-02-05MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainersYork Sun
Change maintainers to Prabhakar Kushwaha for fsl-qoriq, mpc85xx and mpc86xx. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-05video: Armada XP: Move driver to DM_VIDEOStefan Roese
This patch moves the Armada XP video / LCD driver to DM_VIDEO. With this move, the legacy interface board_video_init() is removed from the theadorable board code (only user of this video driver). The support via DT will be added in a separate patch. This patch also enables DM_VIDEO for the theadorable board, as this is needed to not break git bisect'ability. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Anatolij Gustschin <agust@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
2019-02-05arm64: mvebu: Add basic support for uDPU boardVladimir Vid
This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp "distribution point unit" made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable). On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type) Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Luis Torres <luis.torres@methode.com> Cc: Scott Roberts <scott.roberts@telus.com> Cc: Paul Arola <paul.arola@telus.com> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-02Merge tag 'for-master-20190201' of git://git.denx.de/u-boot-rockchipTom Rini
u-boot-rockchip changes for 2019.04-rc1: * support for Chromebook Bob * full pinctrl driver using DTS properties * documentation improvements * I2S support for some Rockchip SoCs
2019-02-02Merge tag 'mips-pull-2019-02-01' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: mscc: jr2: small fixes - MIPS: mscc: luton: add ethernet and switch driver - MIPS: mt76xx: fix timer frequency
2019-02-01rockchip: Add MAINTAINER entry for chromebook_speedyPhilipp Tomsich
This adds a MAINTAINER entry for chromebook_speedy. Without this, we get the following warnings from the maintainers check: WARNING: no status info for 'chromebook_minnie' WARNING: no maintainers for 'chromebook_minnie' Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: Add support for chromebook_bobSimon Glass
Bob is a 10-inch chromebook produced by Asus. It has two USB 3.0 type-C ports, 4GB of SDRAM, WiFi and a 1280x800 display. It uses its USB ports for both power and external display. It includes a Chrome OS EC (Cortex-M3) to provide access to the keyboard and battery functions. Support so far includes only: - UART - SDRAM - MMC, SD card - Cros EC (but not keyboard) Not included: - Keyboard - Display - Sound - USB - TPM Bob is quite similar to Kevin, the Samsung Chromebook Plus, but support for this is not provided in this series. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: evb_rk3399: Tidy up the READMESimon Glass
Add mention of a prerequisite needed to build the image. Also adjust the English wording in a few places. Ideally this should move to using binman to produce images, and avoid the manual steps. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: add support for veyron-speedy (ASUS Chromebook C201)Marty E. Plummer
This adds support for the ASUS C201, a RK3288-based clamshell device. The device tree comes from linus's linux tree at 3f16503b7d2274ac8cbab11163047ac0b4c66cfe. The SDRAM parameters are for 4GB Samsung LPDDR3, decoded from coreboot's src/mainboard/google/veyron/sdram_inf/sdram-lpddr3-samsung-4GB.inc Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01am335x, shc: adapt shc board to DMHeiko Schocher
port the am335x based shc board to DM, to get rid of DW warnings when compiling U-Boot. - remove uneccessary board code - adapt defconfigs - remove unneeded defconfigs configs/am335x_shc_prompt_defconfig configs/am335x_shc_sdboot_prompt_defconfig Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01ARM: dts: am335x-shc: add u-boot specific dtsiHeiko Schocher
add u-boot specific am335x-shc-u-boot.dtsi file, in which we add u-boot specific adaptions. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01arm: dts: add am335x-shc.dts for shc boardHeiko Schocher
add DTS from linux tree commit "47bfa6d9dc8c060bf56554a465c9031e286d2f80" change for U-Boot: switch to SPDX-license identifier. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-02-01MSCC: Fix Jaguar2 board detection.Horatiu Vultur
When power cycle the Jaguar2 boards, it couldn't read the phys, therefore it always deduce that the board type is pcb111. Add a small delay after setting the gpio pins, fix the issue. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01MSCC: Jaguar2 enable debug uartHoratiu Vultur
Enable debug uart for Jaguar2 SoC family. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-30Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- Enable DM_MMC support
2019-01-30Merge tag 'u-boot-imx-20190129' of git://git.denx.de/u-boot-imxTom Rini
For 2019.04
2019-01-29sunxi: board: do MMC pinmux setup for DM_MMC buildsAndre Przywara
Enabling DM_MMC skips the call to mmc_pinmux_setup() in board.c, as this is supposed to be handled by the MMC driver, using DT information. However we don't have a pinctrl driver yet, but would still like to keep the working pinmux setup for our MMC devices. So bring this particular call back to the DM_MMC code flow. When booting from either SD card or eMMC, the SPL does the setup for us, but when booting from SPI or USB we must not skip this part. Fixes, boot via FEL or SPI flash, where the SPL won't setup the pinmux Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@openedev.com> [jagan: add Fix details on commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-28ARM: imx6q_logic: Enable Falcon Mode and fatwriteAdam Ford
This patch enables Falcon Mode by default and updates the README file to show instructions on how to run from the micro SD card or eMMC. This patch also enables fatwrite to help assist with writing the 'args' to the microSD card. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-01-28ARM: DTS: imx6q-logicpd: Update DTS/DTSI filesAdam Ford
The i.MX6 SOM and development kits have undergone significant updates and changes over the past few months. This re-sync's the U-Boot with Logic PD's BSP. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-01-28imx6q_logic: Enable MMC booting from SPLAdam Ford
The MMC booting wasn't previously fitting into the codespace. This patch enables MMC booting from the baseboard by reducing some DM overhead during SPL. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-01-28arm: imx7s-warp: Convert to DM PMICBryan O'Donoghue
This patch converts the warp7 and warp7_bl33 board ports over to using the DM PMIC model. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-01-28warp7: defconfig: Switch to DM for I2CBryan O'Donoghue
This commit switches to DM I2C for warp7 and warp7_bl33 defconfigs. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-01-28arm: imx7s-warp: Convert to DM MMC initializationBryan O'Donoghue
Converts from fixed initialization of MMC to DM initialization of MMC. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-01-28imx8mq_evk/README: remove ARCH environment variableBaruch Siach
There is no need to set the ARCH variable when building U-Boot. In fact, the ARCH name in U-Boot is 'arm'. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-01-28imx8qxp: mek: update READMEPeng Fan
Update README after we switch to use SPL Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28imx8qxp: mek: default enable SPLPeng Fan
Enable SPL for i.MX8QXP MEK, and currently use SPL FIT. The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK. Note: SPL FIT could not support secure boot chain, because i.MX8/8X only support i.MX container format. This container format has not been upstreamed, so we use FIT for now. When SPL container supported, we could switch to that. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28colibri_imx7: drop legacy usdhc supportStefan Agner
Drop legacy pinmux/usdhc board configuration. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28arm: dts: imx7: colibri: split dt for raw NAND and eMMC devicesStefan Agner
In preparation of adding CONFIG_DM_MMC support use separate device trees for raw NAND and eMMC devices. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28pico-imx7d: Add LCD supportFabio Estevam
Add support for the VXT VL050-8048NT-C01 panel connected through the 24 bit parallel LCDIF interface. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-01-28imx: Add PHYTEC phyBOARD-i.MX6UL-SeginMartyn Welch
Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on the PHYTEC phyCORE-i.MX6UL SOM (PCL063). CPU: Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 44C Reset cause: POR Board: PHYTEC phyCORE-i.MX6UL I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial Net: FEC0 Working: - Eth0 - i2C - MMC/SD - NAND - UART (1 & 5) - USB (host & otg) Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2019-01-26linker: Modify linker scripts to be more genericTom Rini
Make use of "IMAGE_MAX_SIZE" and "IMAGE_TEXT_BASE" rather than CONFIG_SPL_MAX_SIZE and CONFIG_SPL_TEXT_BASE. This lets us re-use the same script for both SPL and TPL. Add logic to scripts/Makefile.spl to pass in the right value when preprocessing the script. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Adam Ford <aford173@gmail.com> #da850evm & omap3_logic_somlv Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-25poplar: clean up board level mmc initialization codeShawn Guo
We have converted mmc to driver model on Poplar. So let's clean up board level mmc initialization code. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-01-24Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2019-01-24board: topic-miamiplus: Run IO PLL at 1000 MHzMike Looijmans
The miamiplus can use GEM0 through MIO pins, which requires a 125 MHz TX clock to be generated. With the IO PLL at 1200 MHz this isn't possible, so change it to run at 1000 and adjust the divisors accordingly. Also set the GEM0 clock source to MIO instead of EMIO. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24topic-miamiplus: Run CPU at 800MHz for speedgrade-2Mike Looijmans
The miamiplus contains a speedgrade-2 device, which may run the CPU at 800MHz. Change the PLL setting to 800MHz, and adapt the setpoints in the devicetree. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Fix tcminit help text alignmentMichal Simek
Trivial patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Fix mmc node names to be in sync with kernelSiva Durga Prasad Paladugu
This patches renames sd nodes in dts to be in line with kernel. This patch also modifies the references for the same in code. It checks mmc first to have no time penalty for new DT node names based on left-to-right expression evaluation. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Protect board_late_init functionMichal Simek
Function should be compiled only when CONFIG_BOARD_LATE_INIT is defined. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-23MSCC: Add board support for Serval SoC family.Horatiu Vultur
Add board support and configuration for Jaguar2 SoC family. The detection of the board type is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MSCC: Add board support for Servalt SoC familyHoratiu Vultur
Add board support, configuration and DTS for Servalt SoC family. Currently there is one board in this family. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MIPS: mscc: ocelot: add switch reset supportGregory CLEMENT
On some ocelots platform a workaround is needed in order to be able to reset the switch without resetting the DDR. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-21ARM: mvebu: add support for Allied Telesis x530Chris Packham
This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21board: mvebu: drop unused ETH_PHY macro definitionsBaruch Siach
These macros are not used anywhere in the boards code. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Mario Six <mario.six@gdsys.cc> Cc: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Support 1 GB version of Turris MoxMarek Behún
Use get_ram_size to determine if the RAM size on Turris Mox is 512 MiB or 1 GiB. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Read info (and ethaddrs) from OTPMarek Behún
Add support for reading One-Time Programmable memory via mailbox, which communicates with CZ.NIC's firmware on the Secure Processor (Cortex-M3) of Armada 3720. Display product serial number and additional info, and also set MAC addresses. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Check and configure modulesMarek Behún
Check if Mox modules are connected in supported mode, then configure the MDIO addresses of switch modules. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Change SERDES map depending on module topologyMarek Behún
When SFP module is connected directly to CPU module we want the SGMII lane speed at 1.25 Gbps. This is a temporary solution till there is a comphy driver in the kernel capable of changing SGMII speed at runtime. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2025-01-07 18:34:01 +0000