summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2019-07-29rockchip: rk3288-phycore: move phycore_init() to its own board fileKever Yang
phycore_init() is use for phycore board only, it should be move back to phycore-rk3288.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move setup_led() to firefly-rk3288Kever Yang
Only firefly-rk3288 has the dts node "u-boot,boot-led", while CONFIG_SPL_LED is not enable, move code to firefly-rk3288 now in case someone need this code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-24doc: arch: Convert README.sandbox to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-21Merge tag 'rockchip-for-v2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399 lpddr4 support - rk3399-rock960 board support improvement - Eliminate pyelftools dependency by make_fit_atf.py - clean up rockchip dts to use -u-boot.dtsi - use ARM arch/generic timer instead of rk_timer - clean up Kconfig options for board support
2019-07-20rockchip: Remove obsolete references to pyelftoolsChris Webb
make_fit_atf.py no longer requires pyelftools, and nothing else in the rockchip build requires it either, so remove references to installing it from the documentation. Signed-off-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20rockchip: board: rk3288: remove board_boot_order()Kever Yang
Prefer to use dts config instead, remove all board_boot_order() for rk3288 boards. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-19riscv: sifive: fu540: Enable SiFive SPI and MMC SPI driversBhargav Shah
This patch enables SiFive SPI and MMC SPI drivers for the SiFive Unleashed board. Signed-off-by: Bhargav Shah <bhargavshah1988@gmail.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-19riscv: sifive: fu540: Setup ethaddr env variable using OTPAnup Patel
This patch extends SiFive FU540 board support to setup ethaddr env variable based on board serialnum read from OTP. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: sifive: Drop GEMGXL clock driverAnup Patel
The GEMGXL clock driver is now directly part of Cadence MACB ethernet driver in upstream Linux kernel. There is no separate GEMGXL clock driver in upstream Linux kernel hence we drop GEMGXL clock driver from U-Boot as well. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19rockchip: rock960-rk3399: fix mail format in MAINTAINER fileKever Yang
The mail format should have '<>', or else the patman won't recognize it correctley. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-18Merge branch '2019-07-17-master-imports'Tom Rini
- Various FS/disk related fixes with security implications. - Proper fix for the pci_ep test. - Assorted bugfixes - Some MediaTek updates. - 'env erase' support.
2019-07-18qemu-riscv: enable VIRTIO_PCIDavid Abdurachmanov
libvirt v.5.3.0 with QEMU 4.0.0 or above uses PCI automatically and thus devices (network, storage, etc) are connected via PCI. Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-17board: ti: am654: Use EEPROM-based board detectionAndreas Dannenberg
The TI AM654x EVM base board and the associated daughtercards have on- board I2C-based EEPROMs containing board configuration data. Use the board detection infrastructure introduced earlier to do the following: 1) Parse the AM654x EVM base board EEPROM and populate items like board name and MAC addresses into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing the associated presence signals via an I2C-based GPIO expander. Then, if such a card is found, parse the data such as additional Ethernet MAC addresses from its on-board EEPROM and populate into U-Boot accordingly 3) Dynamically create an U-Boot ENV variable called overlay_files containing a list of daugherboard-specific DTB overlays based on daughercards found. This patch adds support for the AM654x base board ("AM6-COMPROCEVM") as well as for the IDK ("AM6-IDKAPPEVM"), OLDI LCD ("OLDI-LCD1EVM") PCIe/USB3.0 ("SER-PCIEUSBEVM"), 2 Lane PCIe/USB2.0 ("SER-PCIE2LEVM"), and general purpuse ("AM6-GPAPPEVM") daughtercards. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17ti: common: am6: Add support for setting MAC addressesAndreas Dannenberg
The AM654x EVM based on the TI K3 family of SoCs has an updated board detection EEPROM structure that contains a TLV record of dedicated MAC addresses rather than a range of MAC addresses as it was used on earlier platforms such as DRA7. Add a basic function that allows us setting up Ethernet MAC addresses into the U-Boot environment based on the MAC address record contained in the common TI EEPROM structure. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17ti: common: am6: Add support for board description EEPROMAndreas Dannenberg
The AM654x EVM based on the TI K3 family of SoCs have an updated board detection EEPROM structure, now comprising variable-sized TLV-type records, containing a superset of what is already being provided on earlier platforms such as DRA7. Add basic support for parsing the new data structures contained on the base board into the common TI EEPROM structure while also providing infrastructure that can be used later on to parse data from additional EEPROMs such as the ones that are used on daughtercards for this platform. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17am65x: README: Add eMMC layout and flash instructionsFaiz Abbas
Add instructions for flashing boot images to the eMMC with a layout of the address where each image needs to be flashed. Also add instructions to flash filesystem partition in user partition and boot kernel from the rootfs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17armV7R: K3: am654: Load SYSFW binary and config from boot mediaAndreas Dannenberg
Use the System Firmware (SYSFW) loader framework to load and start the SYSFW as part of the AM654 early initialization sequence. While at it also initialize the WKUP_UART0 pinmux as it is used by SYSFW to print diagnostic messages. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-16Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Beelink-x2 STB support (Marcus) - H6 DDR3, LPDDR3 changes (Andre, Jernej) - H6 pin controller, USB PHY (Andre)
2019-07-15sun8i: h3: Add support for the Beelink-x2 STBMarcus Cooper
The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a dual colour LED and an optical S/PDIF connector. Linux commit details about the sun8i-h3-beelink-x2.dts sync: "ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2" (sha1: cc4bddade114b696ab27c1a77cfc7040151306da) Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-14Merge tag 'u-boot-stm32-20190712' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - syscon: add support for power off - stm32mp1: add op-tee config - stm32mp1: add specific commands: stboard and stm32key - add stm32 mailbox driver - solve many stm32 warnings when building with W=1 - update stm32 gpio driver
2019-07-13ARM: davinci: da850: Manual pinmux only when PINCTRL not availableAdam Ford
With a recent update to the pinctrl-single driver and the fact that the da850evm has both DM and OF_CONTROL working in both SPL and U-Boot, some of the manual pinmuxing can be setup to only be activated when either the driver doesn't have DM for it, or when CONFIG_PINMUX isn't available (only during SPL). If the code ever shrinks enough to support PINCTRL in SPL, a lot of this can go away. This also remove some manual pinmuxing not needed by SPL to give SPL a little more breathing room. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-13ARM: am335x: Add phyCORE AM335x R2 supportNiel Fourie
Support for Phytech phyCORE AM335x R2 SOM (PCL060) on the Phytec phyBOARD-Wega AM335x. CPU : AM335X-GP rev 2.1 Model: Phytec AM335x phyBOARD-WEGA DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 eth0: ethernet@4a100000 Working: - Eth0 - i2C - MMC/SD - NAND - UART - USB (host) Device trees were taken from Linux mainline: commit 37624b58542f ("Linux 5.1-rc7") Signed-off-by: Niel Fourie <lusus@denx.de> Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Marek Vasut <marex@denx.de>
2019-07-13ARM: legoev3: convert to driver modelDavid Lechner
This converts LEGO MINDSTORMS EV3 to the driver model. MMC, SERIAL, SPI and SPI_FLASH are converted. The device tree contains only the minimal nodes required by U-Boot since the size of U-Boot is limited to 256K on this device. Signed-off-by: David Lechner <david@lechnology.com>
2019-07-13ARM: omap3: evm: Enable DM_USB in defconfigDerald D. Woods
This addresses the following warning message: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== As USB support for older OMAP3 SoC's improves, OMAP3 EVM can be readily adapted. There is some additional 'gpio-hog' support needed to fully setup USB in a similar manner to Linux. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2019-07-12board: pm9263: Convert to CONFIG_DM_USB and CONFIG_DM_VIDEOIlko Iliev
Convert the board to support the USB and video driver model and remove the unnecessary code.
2019-07-12board: pm9261: Convert to CONFIG_DM_USB and CONFIG_DM_VIDEOIlko Iliev
Convert the board to support the USB and video driver model and remove the unnecessary code.
2019-07-12board: st: add missing gpio_request() for stm32f429-discoveryPatrice Chotard
This fixes the following error message: U-Boot 2019.07-rc4-00103-g5eea874b5e (Jun 25 2019 - 15:09:31 +0200) DRAM: 8 MiB gpio@40021800: dir_output: error: gpio GPIOG14 not reserved gpio@40021800: dir_output: error: gpio GPIOG13 not reserved gpio@40021800: set_value: error: gpio GPIOG14 not reserved Flash: 2 MiB .... Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-12board: stm32mp1: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: warning: no previous prototype for 'board_quiesce_devices' [-Wmissing-prototypes] void board_quiesce_devices(void) ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONSPatrick Delaunay
Update kernel MTD partition in device tree with U-Boot information. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: add configuration op-teePatrick Delaunay
Add support of Trusted boot chain with OP-TEE - reserved 32MB at the end of the DDR for OP-TEE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: cosmetic: remove unnecessary includePatrick Delaunay
Remove post.h include as it is used in spl.c Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: update READMEPatrick Delaunay
Add latest information and correct some information. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: add stboard commandPatrick Delaunay
Allow to update board identification in OTP 59. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: call regulators_enable_boot_on in board_initPatrick Delaunay
U-Boot activates regulators by reading the "regulator-boot-on" property in DT; it is requested by M4 early Boot feature. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: move CONFIG_ENV in KconfigPatrick Delaunay
Move 2 ENV configuration flags in board Kconfig - CONFIG_ENV_SECT_SIZE - CONFIG_ENV_OFFSET Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-11Merge tag 'dm-pull-9jul19-take2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm - Sandbox improvements including .dts refactor - Minor tracing and PCI improvements - Various other minor fixes - Conversion of patman, dtoc and binman to support Python 3
2019-07-11km/spi: remove deprecated SPI flash driver code for KM Kirkwood boardsPascal Linder
KM Kirkwood boards now implement the driver model for its SPI flash interface. Therefore, the old board specific claim and release functions can be deleted. The preprocessor definition CONFIG_SYS_KW_SPI_MPP is yet unused as well. All its appearances and dependencies are removed in the kirkwood_spi driver, header files and finally the configuration whitelist. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11km/spi: activate driver model for SPI flash on KM Kirkwood boardsPascal Linder
The corresponding configurations are selected in the common Kconfig file. This is easier than changing every affected board default configuration file. The default configuration for the PORTL2 board, however, still needs some modifications to correctly use the driver model. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11km/spi: overwrite kirkwood_spi weak functions for KM Kirkwood boardsPascal Linder
As the SPI NOR and NAND devices share the same hardware pins, the MPP configuration has to be changed when claiming/releasing the bus. The current configuration is saved when claiming and restored when releasing. Furthermore, a general-purpose output is used to switch the chip-select signal. This is now also implemented for the DM part of the kirkwood_spi driver. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11km: modify Kconfig file organization for KM boardsPascal Linder
As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: turris_omnia: fix rescue mode bootcmd bootargs settingMarek Behún
Rescue mode bootcmd currently only appends the "omniarescue" parameter to the bootargs variable. We do not want the user to be able to change rescue mode bootargs. Therefore change this so that bootcmd sets the bootargs variable in an absolute way (adding console device information and the omniarescue paramterer). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: turris_omnia: call pci_init from board init codeMarek Behún
We always want to enumerate PCIe devices, because withouth this they won't work in Linux. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: turris_omnia: fix adapters MAC addressesMarek Behún
The board code reads MAC addresses from the ATSHA204A cryptochip. For compatibility reasons the ethernet adapters on this SOC are not enumerated in register address order. But when Omnia was first manufactured this was done differently. Change setting of MAC addresses to conform to the description on the stickers sticked on actual Omnias. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: clearfog: document boot from SATABaruch Siach
Document the main U-Boot image offset when booting from SATA disk on the Clearfog board. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-10sandbox: Add documentation on how to run valgrindSimon Glass
U-Boot sandbox can run with valgrind to check memory allocations. Add documentation on how to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-10sandbox: Allo sdl-config to be overriddenSimon Glass
When cross-compiling, sometimes sdl-config must come from a different path from the default. Add a way to override it, by adding SDL_CONFIG to the environment before building U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-09Merge tag 'u-boot-atmel-2019.10-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features and fixes for 2019.10 cycle This includes the Atmel QSPI driver and support for the at91 boards. This is the port of the driver from Linux, mostly done by Tudor Ambarus.
2019-07-09configs: sama5d27_som1_ek: add qspiflash_defconfigTudor Ambarus
Add the default config file of QSPI media. The config is based on sama5d27_som1_ek_mmc_defconfig. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-09configs: sama5d2_xplained: add qspiflash_defconfigTudor Ambarus
Add the default config file of QSPI media. The config is based on sama5d2_xplained_mmc_defconfig. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-08Merge tag 'u-boot-amlogic-20190704' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix khadas-vim README - add support for unique generated MAC adresses from SoC serial, limited to Amlogic GXL/GXM boards for now
generated by cgit (git 2.34.1) at 2024-12-27 19:26:18 +0000