summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2006-08-22General indent and whitespace cleanups.Jon Loeliger
2006-08-09Removed MPC8641HPCN DTS source file from build.Jon Loeliger
It is no longer linked into U-Boot; its sources are now located in the kernel tree. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-09Add Rapidio support for the MPC8641HPCNJohn Traill
Signed-off-by: John Traill <john.traill@freescale.com>
2006-07-31Correct the irq value of DUART2Haiying Wang
2006-07-31Move get_board_sys_clk to board directoryHaiying Wang
2006-07-27Fixed OF device tree of mpc86xxhpcn board.Zhang Wei
The changes works in with kernel irq mapping rework. Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2006-07-13Add support for reading and writing mac addresses to or from ID EEPROM.Haiying Wang
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). With attached patch, we can use command "mac/mac read/mac save/" to read and write EEPROM under u-boot prompt. U-boot will calculate the checksum of EEPROM while bootup, if it is right, then u-boot will check whether the mac address of eTSEC0/1/2/3 is availalbe (non-zero). If there is mac address availabe in EEPROM, u-boot will use it, otherewise, u-boot will use the mac address defined in MPC8641HPCN.h. This matches the requirement to set unique mac address for each TSEC port. Signed-off-by: Haiying Wang <haiying.wang@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
2006-06-22Fix bug in 8641hpcn reset command with no args.Jon Loeliger
Signed-off-by: Haiying Wang <haiying.wang@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>
2006-06-22Reworked IRQ mapping in OF-tree.Zhang Wei
2006-06-07Allow DTC path to be passed in.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-06-07Modify the IRQ of DUART2Haiying Wang
2006-05-31Review cleanups.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31White space cleanup.Jon Loeliger
Some 80-column cleanups. Convert printf() to puts() where possible. Use #include "spd_sdram.h" as needed. Enhanced reset command usage message a bit. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31Removed unneeded local_bus_init() from 8641HPCN board.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31Moved mpc8641hpcn_board_reset() out of cpu/ into board/.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31Move mpc86xx PIXIS code to board directoryJon Loeliger
First cut at moving the PIXIS platform code out of the 86xx cpu directory and into board/mpc8641hpcn where it belongs. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-26Added pci@8000 block.Haiying Wang
Updated ethernet interrupt mappings (moved up 48). Cleaned up a few comments. Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-05-19Update 86xx address map and LAWBARs.Jon Loeliger
2006-05-19Enable 2nd CPU and I2C.Jon Loeliger
2006-05-15Update interrupt mapping.Jon Loeliger
2006-05-10Remove unneeded INIT_RAM_LOCK cache twiddling.Haiying Wang
Correctly tracks r29 as global data pointer now. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-05-10Remove unnecessary flash.c file.Jon Loeliger
2006-05-09Get MPC8641HPCN flash images working.Jon Loeliger
Enable the CFI driver. Remove bogus LAWBAR7 cruft. Use correct TEXT_BASE, Fixup load script. Enable SPD EEPROM during DDR setup. Use generic RFC 1918 IP addresses by default.
2006-04-27Cleanup whitespaces and style issues.Jon Loeliger
Removed //-style comments. Use 80-column lines. Remove trailing whitespace. Remove dead code and debug cruft.
2006-04-26Initial support for MPC8641 HPCN board.Jon Loeliger
2006-04-21Add support for BC3450 boarddzu@denx.de
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-19Added missing nand.c for NC650 boarddzu@denx.de
Signed-off-by: dzu@denx.de <dzu@eddie.localdomain>
2006-04-19Update for NC650 board. Add NC650 based CP850 configuration.dzu@denx.de
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-16Some code cleanupWolfgang Denk
2006-04-16Merge with /home/hs/U-Boot/u-boot-devWolfgang Denk
2006-04-12Merge with /home/m8/git/u-bootWolfgang Denk
2006-04-11* Fix dbau1x00 BoardHeiko Schocher
- Fix dbau1x00 boards broken by dbau1550 patch PLL:s were not set for boards other than 1550. Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. Default boot is now bootp for cards other than 1550. Patch by Thomas Lange Aug 10 2005
2006-04-08Fix JFFS2 support for legacy NAND driver.Marian Balakowicz
Some more NAND cleanup and small fixes.
2006-04-06MCC200 Board: fix flash unprotection code for flash > 32 MB.Wolfgang Denk
2006-04-06Fix Lite500B support: Merge with /home/raj/git/u-boot.l5200b_pciWolfgang Denk
2006-04-01* Add support for ymodem protocol downloadWolfgang Denk
Patch by Stefano Babic, 29 Mar 2006 * Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000 Merge with /home/mk/8-benq/u-boot
2006-03-31GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk
2006-03-30delta board: one more DA9030 fix.Markus Klotzbuecher
2006-03-29Change delta board memory map to start at 0x80000000.Markus Klotzbuecher
2006-03-29delta board: minor update to DA9030 code.Markus Klotzbuecher
2006-03-29Set SDelay register in the DDR controller for the MPC5200B chip.Rafal Jaworowski
2006-03-27delta board: fix DA9030 reset procedure.Markus Klotzbuecher
2006-03-24Merge with http://www.denx.de/git/u-boot.gitMarkus Klotzbuecher
2006-03-24delta board: DA9030 initialization and i2c support. Some minor changes toMarkus Klotzbuecher
make the pxa i2c driver work with the monahans cpu.
2006-03-20Cleanup of the monahans cpu and delta board port.Markus Klotzbuecher
2006-03-17Merge with port of MPC8349EMDS boardWolfgang Denk
2006-03-17Add support for Lite5200B board.Wolfgang Denk
Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
2006-03-16Support for DDR with 32-data path. Addotional notes on injectingRafal Jaworowski
multiple-bit errors.
2006-03-16Add command for handling DDR ECC registers on MPC8349EE MDS board.Marian Balakowicz
2006-03-14Add initial support for MPC8349E MDS board.Marian Balakowicz
generated by cgit (git 2.34.1) at 2024-12-24 17:27:37 +0000