summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2017-03-20imx: ventana: add GW5904 supportTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20imx: mx6slevk: enable more DM driversPeng Fan
Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. So needs to enable them together. DM FEC and SPI are not enabled, but they use gpio in board code. So use gpio_request first to request the gpio, because DM_GPIO is enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-03-19ti: boot: Register the MMC controllers in SPL in the same way as in u-bootJean-Jacques Hiblot
To keep a consistent MMC device mapping in SPL and in u-boot, let's register the MMC controllers the same way in u-boot and in the SPL. In terms of boot time, it doesn't hurt to register more controllers than needed because the MMC device is initialized only prior being accessed for the first time. Having the same device mapping in SPL and u-boot allows us to use the environment in SPL whatever the MMC boot device. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-03-19Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/bk4r1_defconfig configs/colibri_vf_defconfig configs/pcm052_defconfig include/configs/colibri_vf.h include/configs/pcm052.h
2017-03-19imx: ventana: add EMMC configurationTim Harvey
Prepare for boards with EMMC instead of NAND flash Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-19ARM: vf610: move to standard arch/board approachStefan Agner
Move Freescale/NXP Vybrid to a standard arch/board approach, similar to what has been done to i.MX 6 earlier in commit 89ebc82137be ("ARM: mx6: move to a standard arch/board approach"). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-03-19imx: ventana: make SD3_VSELECT board specificTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: make OTG VBUS power enable board specificTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: fix hwconfigTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: change name of rs232_en to indicate polarityTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: move mmc_init to commonTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: add additional DRAM configurationsTim Harvey
- 64bit 8gB density (4GiB) IMX6DQ - 64bit 4gB density (2GiB) IMX6SDL Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19colibri_imx7: use device-tree for MTD partitionsStefan Agner
Use device-tree fixup to communicate the MTD partitions to the kernel. Remove mtdparts from the kernel command line. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-03-19colibri_imx7: setup PMIC sleep mode configurationStefan Agner
Disable 3.3V Ethernet and ARM rail when entering sleep mode. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-03-19colibri_imx7: implement board level USB PHY modeStefan Agner
Implement board level USB PHY mode callback. On USB OTG Port 1 the Colibri standard foresees GPIO USBC_DET to decide whether the port should run in Host or Device mode. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-03-19arm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and OPOS6ULDev carrier boardSébastien Szymanski
OPOS6UL is an i.MX6UL based SoM with 256MB RAM, 4GB eMMC and an ethernet phy. OPOS6ULDev is carrier board for the OPOS6UL. U-Boot SPL 2017.03-rc3-00002-g5085c26 (Mar 07 2017 - 09:48:09) Trying to boot from MMC1 U-Boot 2017.03-rc3-00002-g5085c26 (Mar 07 2017 - 09:48:09 +0100) CPU: Freescale i.MX6UL rev1.0 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 40C Reset cause: POR Model: Armadeus Systems OPOS6UL SoM on OPOS6ULDev board DRAM: 256 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Video: 800x480x18 In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-17Merge git://git.denx.de/u-boot-rockchipTom Rini
This includes support for rk3188 from Heiko Stübner and and rk3328 from Kever Yang. Also included is SPL support for rk3399 and a fix for rk3288 to get it booting again (spl_early_init()).
2017-03-17ARM: DT: stm32f7: add qspi pin contol nodeVikas Manocha
It also removes the qspi pin configuration done during the board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add ethernet pin contol nodeVikas Manocha
It also removes the ethernet pin configuration done during the board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add pin control node for serial port pinsVikas Manocha
And remove the uart pin configuration from board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17stm32f7: clk: remove usart1 clock enable from board initVikas Manocha
Before clock driver availability it was required to enable usart1 clock for serial init but now with clock driver is taking care of usart1 clock. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17serial: stm32f7: add device tree supportVikas Manocha
This patch adds device tree support for stm32f7 serial driver & removes serial platform data structure. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-17arm: imx6: tqma6: add support for TQMa6DL variantMarkus Niebel
This adds support for TQMa6DL using i.MX6DL and 1GiB DRAM Since The module will use the same devicetree, we patch the ram size in ft_board_setup. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settingsMarkus Niebel
We have a Kconfig name for the module types. Let's Use it. Some feature selections and configurations are based on the module. Module selection selects the CPU type. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17i.MX6Q: isiot: Switch the mmc env based on devnoJagan Teki
Add board_mmc_get_env_dev Switch the mmc env based on the mmc devno, instead of separately defining a config item in include/configs using board_mmc_get_env_dev - devno 0: sd/esd - devno 1: mmc/emmc Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6Q: icorem6_rqs: Add mmc_late_initJagan Teki
Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6Q: icorem6_rqs: Add modeboot env via board_late_initJagan Teki
Add runtime, modeboot env which is setting mmcboot based on the bootdevice so-that conditional macros for MMC via CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17imx6: icorem6_rqs: Add eMMC boot supportJagan Teki
Boot from eMMC: -------------- U-Boot SPL 2017.01-00318-g8e243f8 (Jan 26 2017 - 11:53:21) Trying to boot from MMC2 U-Boot 2017.01-00318-g8e243f8 (Jan 26 2017 - 11:53:21 +0100) CPU: Freescale i.MX6D rev1.2 at 792 MHz Reset cause: POR Model: Engicam i.CoreM6 Quad/Dual RQS Starter Kit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial switch to partitions #0, OK mmc1(part 0) is current device Net: No ethernet found. Hit any key to stop autoboot: 0 Booting from mmc ... switch to partitions #0, OK mmc1(part 0) is current device Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17mx6: tqma6: clear enet clk sel for mba6Markus Niebel
we have external ref clock from phy. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: tqma6: adjust ethernet phy reset delayMarkus Niebel
fix the reset delay which was to short Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: tqma6: disable spi CS unused in U-BootMarkus Niebel
Since the CS are not in use, do not map them. User of starterkit mainboard is free to use them otherwise. When using these pins later in the OS for instance as GPIO IRQ pin, they need to be input. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: tqma6: use lower driver stength for I2C pinsMarkus Niebel
The current driver stength is too high, leading to spec violations on the falling edge. Fix it with values from HW Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: tqma6: implement power_init_boardMarkus Niebel
PMIC implements proper I2C bus switching, implement power_init_board instead handling in board_late_init. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2017-03-17imx6: icorem6_rqs: Update SPL board boot order for eMMCJagan Teki
SPL mmc device index is get based on the boot device, like - BOOT_DEVICE_MMC1 for mmc device 0 - BOOT_DEVICE_MMC2 for mmc device 1 Currently BOOT_DEVICE_MMC1 is setting both SD/eSD and MMC/eMMC boot devices in i.MX, So u-boot is loading from mmc device 0 even "if the board booting from SD/eSD or MMC/eMMC" So, this patch set BOOT_DEVICE_MMC2 for MMC/eMMC so for MMC/eMMC the u-boot is loading from mmc device 1 and the board file need to take care if the board have different mmc device order intialization. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6UL: isiot: Switch the mmc env based on devnoJagan Teki
Add board_mmc_get_env_dev Switch the mmc env based on the mmc devno, instead of separately defining a config item in include/configs using board_mmc_get_env_dev - devno 0: sd/esd - devno 1: mmc/emmc Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6UL: isiot: Add mmc_late_initJagan Teki
Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6UL: isiot: Add modeboot env via board_late_initJagan Teki
Add runtime, modeboot env which is setting mmcboot, or nandboot based on the bootdevice so-that conditional macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6UL: isiot: Add eMMC boot supportJagan Teki
Boot from eMMC: -------------- U-Boot SPL 2017.01-00314-gd0cd9cd-dirty (Jan 25 2017 - 13:25:27) Trying to boot from MMC2 U-Boot 2017.01-00314-gd0cd9cd-dirty (Jan 25 2017 - 13:25:27 +0100) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 36C Reset cause: POR Model: Engicam Is.IoT MX6UL eMMC Starterkit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial switch to partitions #0, OK mmc1(part 0) is current device Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17imx6: isiotmx6ul: Update SPL board boot order for eMMCJagan Teki
SPL mmc device index is get based on the boot device, like - BOOT_DEVICE_MMC1 for mmc device 0 - BOOT_DEVICE_MMC2 for mmc device 1 Currently BOOT_DEVICE_MMC1 is setting both SD/eSD and MMC/eMMC boot devices in i.MX, So u-boot is loading from mmc device 0 even "if the board booting from SD/eSD or MMC/eMMC" So, this patch set BOOT_DEVICE_MMC2 for MMC/eMMC so for MMC/eMMC the u-boot is loading from mmc device 1 and the board file need to take care if the board have different mmc device order intialization. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17i.MX6: engicam: Include dts files under MAINTAINERSJagan Teki
dts files related to i.MX6 engicam boards are maintined under board, so include them under board/engicam/*/MAINTAINERS Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17imx6: isiotmx6ul: Add NAND supportJagan Teki
Add NAND support for Engicam Is.IoT MX6UL board. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial supportJagan Teki
Boot from MMC: ------------- U-Boot SPL 2017.01-rc2-gba3c151-dirty (Jan 02 2017 - 16:59:33) Trying to boot from MMC1 U-Boot 2017.01-rc2-gba3c151-dirty (Jan 02 2017 - 16:59:33 +0100) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 33C Reset cause: POR Model: Engicam Is.IoT MX6UL Starterkit DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 isiotmx6ul> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-17imx: imx7ulp: add EVK board supportPeng Fan
Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-03-16rockchip: rk3328: add evb-rk3328 supportKever Yang
evb-rk3328 is an evb from Rockchip based on rk3328 SoC: - 2 USB2.0 Host port; - 1 USB3.0 Host port; - 1 HDMI port; - 2 10/100M eth port; - 2GB ddr; - 16GB eMMC; - UART to USB debug port; Signed-off-by: William Zhang <william.zhang@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-16Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-03-14igep00x0: fixup FDT according to detected flash typeLadislav Michl
Leave only detected flash type enabled in FTD as otherwise GPMC CS is claimed (and never freed) by Linux, causing 'concurent' flash type not to be probed. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2017-03-14board: Add STMicroelectronics STiH410-B2260 supportPatrice Chotard
This is a 96Board compliant board based on STiH410 SoC: - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - SATA - HDMI - 2 x USB2.0 type A - 1 x USB2.0 type micro-AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-14armv8: fsl-layerscape: Add vid support for LS2080AQDSPriyanka Jain
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Arpit Goel <arpit.goel@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-14armv8: fsl-lsch3: Update VID supportPriyanka Jain
VID support in NXP layerscape Chassis-3 (lsch3) compilant SoCs like LS2088A, LS2080A differs from existing logic. -VDD voltage array is different -Registers are different -VDD calculation logic is different Add new function adjust_vdd() for LSCH3 compliant SoCs Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Arpit Goel <arpit.goel@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-14armv8: layerscape: Update early MMU for DDR after initializationYork Sun
In early MMU table, DDR has to be mapped as device memory to avoid speculative access. After DDR is initialized, it needs to be updated to normal memory to allow code execution. To simplify the code, dram_init() is moved into a common file as a weak function. Signed-off-by: York Sun <york.sun@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-29 05:50:43 +0000