summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2007-06-01ppc4xx: Update Sequoia NAND booting support with ECCStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-01ppc4xx: Prepare Bamboo port for NAND booting supportStefan Roese
This patch updates the "normal" Bamboo NOR booting port, so that it is compatible with the coming soon NAND booting Bamboo port. It also enables the 2nd NAND flash on the Bamboo. Signed-off-by: Stefan Roese <sr@denx.de>
2007-04-29ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driverStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-04-18Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-04-18ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROMStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-04-16[PATCH] icecube/lite5200b: wakeup from low-power supportDomen Puncer
U-Boot part of Lite5200b low power mode support. Puts SDRAM out of self-refresh and transfers control to address saved at physical 0x0. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2007-04-14[Fix] Set the LED status register on the UC101 for the LXT971 PHY.Heiko Schocher
clear the Display after reset. Signed-off-by: Heiko Schocher <hs@denx.de>
2007-04-12Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-04-04Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk
2007-04-04Minor coding style cleanup.Wolfgang Denk
2007-04-04Merge with /home/wd/git/u-boot/custodian/u-boot-microblazeWolfgang Denk
2007-04-04Minor cleanup.Wolfgang Denk
2007-04-02ppc4xx: Change SysACE address on KatmaiStefan Roese
With this new base address of the Xilinx SystemACE controller the Linux driver will be easier to adapt, since it can now be mapped via the "normal" ioremap() call. Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-31Add a flattened device tree (fdt) command (2 of 2)Gerald Van Baren
Modifications to the existing code to support the new fdt command.
2007-03-31Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-03-31ppc4xx: Update Katmai bootstrap commandStefan Roese
Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB is selected. Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-31ppc4xx: Fix "bootstrap" command for Katmai boardStefan Roese
The board specific "bootstrap" command is now fixed and can be used for the AMCC Katmai board to configure different CPU/PLB/OPB frequencies. Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-30[PATCH] Clean include dependenceMichal Simek
2007-03-30[CLEAN] Remove inefficient Suzaku codeMichal Simek
2007-03-29Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk
2007-03-27PATCH: Resolve GPL license problemMichal Simek
2007-03-26Support for XUPV2P boardMichal Simek
Reset support BSP autoconfig support
2007-03-24Merge with /home/stefan/git/u-boot/acadiaStefan Roese
2007-03-24[PATCH] Add 4xx GPIO functionsStefan Roese
This patch adds some 4xx GPIO functions. It also moves some of the common code and defines into a common 4xx GPIO header file. Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-24[PATCH] Small Sequoia cleanupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-24[PATCH] Clean up 40EZ/Acadia supportStefan Roese
This patch cleans up all the open issue of the preliminary Acadia support. Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-22Fix 8641HPCN problem with ld version 2.16Jon Loeliger
(Dot outside sections problem). This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-03-22Merge with /home/wd/git/u-boot/custodian/u-boot-blackfinWolfgang Denk
2007-03-21Code cleanup. Update CHANGELOGWolfgang Denk
2007-03-21Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk
2007-03-21Merge with /home/stefan/git/u-boot/acadiaStefan Roese
2007-03-21[PATCH] Add AMCC Acadia (405EZ) eval board supportStefan Roese
This patch adds support for the new AMCC Acadia eval board. Please note that this Acadia/405EZ support is still in a beta stage. Still lot's of cleanup needed but we need a preliminary release now. Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-21[PATCH] TQM8272: dont change the bits given from the HRCWHeiko Schocher
for the SIUMCR and BCR Register. Fix the calculation for the EEprom Size Signed-off-by: Heiko Schocher <hs@denx.de>
2007-03-20Merge http://www.denx.de/git/u-bootAubrey Li
2007-03-20[Blackfin][PATCH] Add BF561 EZKIT board supportAubrey Li
2007-03-19Merge http://www.denx.de/git/u-bootAubrey Li
2007-03-19[Blackfin][PATCH] minor cleanupAubrey Li
2007-03-19[Blackfin][PATCH] Add BF537 stamp board supportAubrey Li
2007-03-16Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk
2007-03-16[PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval boardStefan Roese
Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the DDR memory are dynamically programmed matching the total size of the equipped memory (DIMM modules). Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-13Make SC3 board build with 'make O='; use 'addcons' consistentlyWolfgang Denk
(SC3 and Jupiter used to use 'addcon' instead). Signed-off-by: Wolfgang Denk wd@denx.de
2007-03-12[Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issueAubrey Li
2007-03-12[Blackfin][PATCH] code cleanupAubrey Li
2007-03-11[Microblaze][PATCH] part 2Michal Simek
timer support interrupt controller support flash support ethernet support cache support board information support env support booting image support adding support for Xilinx ML401
2007-03-11[Microblaze][PATCH]Michal Simek
timer support interrupt controller support flash support ethernet support cache support board information support env support booting image support adding support for Xilinx ML401
2007-03-10[Blackfin][PATCH] code cleanupAubrey Li
2007-03-09[Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform ↵Aubrey.Li
support
2007-03-08Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk
2007-03-08ppc4xx: Fix file mode of sequoia.cStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-08ppc4xx: Clear Sequoia/Rainier security engine reset bitsJohn Otken john@softadvances.com
Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
generated by cgit (git 2.34.1) at 2024-12-28 00:29:54 +0000