summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2020-08-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Add basic Marvell/Cavium OcteonTX/TX2 support (Suneel) - Infrastructure changes to PCI uclass to support these SoC's (Suneel) - Add PCI, MMC & watchdog driver drivers for OcteonTX/TX2 (Suneel) - Increase CONFIG_SYS_MALLOC_F_LEN for qemu-x86 (Stefan)
2020-08-25Merge tag 'u-boot-rockchip-20200820' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3399 evb sdcard support - Fix for SPL_LED support
2020-08-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Sipeed Maix support S-mode. - Provide command sbi. - Use fdtdec_get_addr_size_auto_parent to get fu540 cache base address. - Fix a compiler error with CONFIG_SPL_SMP=n. - Fix sifive ram driver 32 compiler warnings. - Fix kendryte/pll.h redefine nop() warning.
2020-08-25arm: octeontx2: Add support for OcteonTX2 SoC platformsSuneel Garapati
This patch adds support for all OcteonTX2 96xx/95xx boards from Marvell. For 96xx boards, use octeontx_96xx_defconfig and for 95xx boards, use octeontx_95xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
2020-08-25arm: octeontx: Add support for OcteonTX SoC platformsSuneel Garapati
This patch adds support for all OcteonTX 81xx/83xx boards from Marvell. For 81xx boards, use octeontx_81xx_defconfig and for 83xx boards, use octeontx_83xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
2020-08-25ARM: renesas: Drop unnecessary function ft_board_setup()Stefan Roese
Marek explained on IRC, that ft_board_setup() is not used / necessary at all. So its best to just drop it completely, as it interferes with the cleanup of CONFIG_MAX_PCI_REGIONS (completely removed). Signed-off-by: Stefan Roese <sr@denx.de> Suggested-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-25configs: defconfig for Sipeed Maix in S-modeHeinrich Schuchardt
Provide a defconfig that can be used to build U-Boot for the Maix boards running upon OpenSBI. Update the documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-08-24MAINTAINERS: Add maintainers to XEN sectionAnastasiia Lukianenko
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-24board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and ↵Anastasiia Lukianenko
board_early_init_f function Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-08-24board: armltd: Add support for Total Compute platformUsama Arif
Total Compute is based on ARM architecture and has the following features enabled in u-boot: - PL011 UART - PL180 MMC - NOR Flash - FIT image with Signature - AVB Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-08-21rockchip: firefly-rk3288: Fix the code support for SPL_LEDKever Yang
Fix the build error for the wrong code when CONFIG_SPL_LED is enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-08-20xilinx: common: Change bootm_size variable settingMichal Simek
Linux kernel for arm32 requires dtb and initrd to be placed in low memory to work properly. This requirement is described in chapter 4b) and 5) in Linux documentation (Documentation/arm/booting.rst). There is an issue on arm32 with 2GB of memory that bootm_size is bigger than Linux lowmem (for example with VMSPLIT_3G). That's why limit bootm size on these systems not to be above 768MB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: common: Check return value from variable setupMichal Simek
env_set..() can failed that's why check return status and report it back to make sure that user is aware that's something went wrong. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: common: Get rid of initrd_high variable setupMichal Simek
When bootm_low/bootm_size are setup properly there is no need to setup any initrd_high address. Location for initrd is determined through LMB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: Change logic around zynq_board_read_rom_ethaddr()Michal Simek
There is no reason to build private function when CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET is not defined. There is already weak function which handles default case properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIGMichal Simek
Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG to enable/disable updating variables with run time information. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: remove chip_id functionIbai Erkiaga
Remove chip_id function and integrate the firmware call in the zynqmp_get_silicon_idcode_name function. The change avoids querying the firmware twice and makes the code bit more clear. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: get chip ID at EL3Ibai Erkiaga
Modify the board init function to allow getting the chip ID when U-Boot proper is executed at EL3. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: get chip ID using firmware driverIbai Erkiaga
Current implementation for getting chip ID uses either raw access on EL3 or a SMC call to get the silicon information. Following change simplifies the code using always the firmware driver. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: synchronize firmware call return payloadIbai Erkiaga
Removes duplicated definition of PAYLOAD_ARG_CNT and define it in the firmware driver. Additionally fixes payload buffer declarations without macro usage Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: versal: Use lowest memory for U-BootMichal Simek
Find and use the lowest memory for Versal to make sure that we keep u-boot as low as possible and never use memory above u-boot's maximum VA mapping. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: versal: Add new versal loadpdi commandT Karthik Reddy
Versal loadpdi command is used for loading secure & non-secure pdi images. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20arm64: zynqmp: Fix set_fdtfile() not to break u-boots DTBIgor Lantsman
Origin function was calling strsep which replaced delimiter ',' by a null byte ('\0'). Operation was done directly on FDT which ends up with the following behavior: ZynqMP> printenv fdtfile fdtfile=xilinx/zynqmp.dtb ZynqMP> fdt addr $fdtcontroladdr ZynqMP> fdt print / compatible compatible = "xlnx", "zynqmp" As is visible fdtfile was correctly composed but a null byte caused that xlnx was separated from zynqmp. This hasn't been spotted because in all Xilinx DTs there are at least 3 compatible string and only the first one was affected by this issue. But for systems which only had one compatible string "xlnx,zynqmp" it was causing an issue when U-Boot's DT was used by Linux kernel. The patch removes strsep calling and strchr is called instead which just locate the first char after deliminator ',' (variable called "name"). And using this pointer in fdtfile composing. Fixes: 91d7e0c47f51 ("arm64: zynqmp: Create fdtfile from compatible string") Reported-by: Igor Lantsman <igor.lantsman@opsys-tech.com> Signed-off-by: Igor Lantsman <igor.lantsman@opsys-tech.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: Setup bootm variablesMichal Simek
On system with PL DDR which is placed before PS DDR in DT env_get_bootm_size() and env_get_bootm_low() without specifying bootm_low and bootm_size variables are taking by default gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size. As you see 0 means bank 0 which doesn't need to be PS ddr and even can be memory above 39bit VA which is what U-Boot supports now. That's why setup bootm variables based on ram_base/ram_size setting to make sure that boot images are placed to the same location as U-Boot is placed. This location should be by default location where OS can boot from. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-14board: xen: De-initialize before jumping to LinuxOleksandr Andrushchenko
Free resources used by Xen board before jumping to Linux kernel. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14xen: Port Xen grant table driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: Port Xen bus driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot and strip test code. Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-14serial: serial_xen: Add Xen PV serial driverPeng Fan
Add support for Xen para-virtualized serial driver. This driver fully supports serial console for the virtual machine. Please note that as the driver is initialized late, so no banner nor memory size is visible. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14board: Introduce xenguest_arm64 boardAndrii Anisov
Introduce a minimal Xen guest board running as a virtual machine under Xen Project's hypervisor [1], [2]. Part of the code is ported from Xen mini-os and also uses work initially done by different authors from NXP: please see relevant files for their copyrights. [1] https://xenbits.xen.org [2] https://wiki.xenproject.org/ Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14riscv: sifive/fu540: Move SPL related functions to spl.cBin Meng
It's better to keep all SPL related functions in the same spl.c. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Leo Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14riscv: sifive/fu540: Drop NET_RANDOM_ETHADDRBin Meng
This option was enabled during the earlier U-Boot porting time. Now we already have the OTP driver in place and the unique MAC address is read from the OTP, there is no need to turn on this option. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Leo Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14riscv: sifive/fu540: kconfig: Move FU540 driver related options to the SoC levelBin Meng
All FU540 driver related options should be in the SoC level Kconfig. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14riscv: sifive/fu540: spl: Rename soc_spl_init()Bin Meng
spl_soc_init() seems to be a better name, as all SPL functions names start from the spl_ prefix. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14riscv: sifive/fu540: spl: Drop our own version of board_init_f()Bin Meng
Use the generic board_init_f() provided by the RISC-V library codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-13Merge tag 'u-boot-stm32-20200813' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Use IS_ENABLED to prevent ifdef in board_key_check for STM32MP - Add STM32 FMC2 EBI controller driver - Fix dwc3-sti-glue which allows STiH410-B2260 to boot again - Add fitImage its entry for 587-200 DHCOR SoM - Add both PDK2 and DRC02 DT into DHCOM fitImage its - Fix DHCOM KS8851 ethernet MAC address - Remove stm32mp1 board.c file - Use const for struct node_info in board stm32mp1.c file
2020-08-13board: stm32mp1: use const for struct node_infoPatrick Delaunay
Use const for the variable nodes in ft_board_setup, this patch follow fdt_fixup_mtdparts prototype and no more use stack. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: remove board.cPatrick Delaunay
Remove the file board/st/stm32mp1/board.c which is not more compiled since commit 156732cc8939 ("board: stm32mp1: move the function board_debug_uart_init in spl.c") Fixes: 4fb46816c7e2 ("board: stm32mp1: move the function board_debug_uart_init in spl.c") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13ARM: dts: stm32: Update eth1addr from EEPROM if eth1 presentMarek Vasut
The STM32MP1 DHCOM has two ethernet interfaces, the on-SoM DWMAC and KS8851. Set eth1addr for the KS8851 to a MAC address of the DWMAC incremented by 1. The MAC of the DWMAC is set from on-SoM EEPROM already, but the MAC address of KS8851 was left uninitialized, so fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoMMarek Vasut
The new 587-200 DHCOR SoM is compatible with the 587-100 prototype, hence just replicate the entries, as there is no pattern matching. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13ARM: stm32: Add both PDK2 and DRC02 DT into DHCOM fitImage itsMarek Vasut
Include both PDK2 and DRC02 DTs in the DHCOM fitImage .its and implement support in SPL to select the correct configuration entry for U-Boot by using the machine compatible string from SPL DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: update fdt fixup partitions tableChristophe Kerello
This patch adds "st,stm32mp1-fmc2-nfc" compatible string in the fdt fixup partitions table. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setupPatrick Delaunay
Use IS_ENABLED to prevent ifdef in ft_board_setup. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in env functionsPatrick Delaunay
Use IS_ENABLED to prevent ifdef in env functions: - env_get_location - env_ext4_get_intf - mmc_get_env_dev Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_initPatrick Delaunay
Use IS_ENABLED to prevent ifdef in board_late_init. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fixPatrick Delaunay
Use IS_ENABLED to prevent ifdef in dk2_i2c1_fix. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_infPatrick Delaunay
Use CONFIG_IS_ENABLED to prevent ifdef in set_dfu_alt_inf. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_initPatrick Delaunay
Use IS_ENABLED to prevent ifdef in sysconf_init. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_powerPatrick Delaunay
Use IS_ENABLED to prevent ifdef in board_check_usb_power. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in ↵Patrick Delaunay
g_dnl_board_usb_cable_connected Use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected and in g_dnl_bind_fixup Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_checkPatrick Delaunay
Use IS_ENABLED to prevent ifdef in board_key_check Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2025-01-05 20:07:49 +0000