summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2020-04-20Merge tag 'ti-v2020.07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix boot on am335x guardian board - Increase OPSI speed on AM65x and J721E devices - Use JTAD register for identifying K3 devices. - Update TI entry in MAINTAINERS file.
2020-04-20Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini
2020-04-18Add support for i.MXRT1020-EVK boardGiulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18imx: pmic: Set proper pmic name for iMX53 HSC|DDC boardsLukasz Majewski
After the commit 4213609cc7fb ("drivers: core: use strcmp when find device by name") the exact DTS node name for PMIC device must be provided. This patch fixes this issue by providing full DTS node name ('mc34708@8'). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jaehoon Chug <jh80.chung@samsung.com>
2020-04-18ARM: imx6: DHCOM i.MX6 PDK: Convert to DM_ETHHarald Seiler
Use DM_ETH instead of legacy networking. Add VIO as a fixed regulator to the relevant device-trees and augment the FEC node with properties for the reset GPIO. It should be noted that the relevant properties for the reset GPIO already exist in the PHY node (reset-gpios, reset-delay-us, reset-post-delay-us) but U-Boot currently ignores those and only supports the bus-level reset properties in the FEC node (phy-reset-gpios, phy-reset-duration, phy-reset-post-delay). Signed-off-by: Harald Seiler <hws@denx.de>
2020-04-18wandboard: Print the board version in board_late_init()Fabio Estevam
Since CONFIG_DISPLAY_BOARDINFO_LATE is no longer used, the checkboard() function is no longer called. As it is useful to print the board revision, print it inside board_late_init() instead. Also, to avoid GPIO errors related to using a GPIO without requesting it, move the gpio_request(REV_DETECTION, "REV_DETECT") call prior to its usage. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Heiko Schocher <hs@denx.de>
2020-04-18wandboard: Do not print error when PMIC is not presentFabio Estevam
On wandboard variants prior to revD1, there is no PMIC populated, so do not print an error when the reading of the device ID register fails. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Heiko Schocher <hs@denx.de>
2020-04-18wandboard: Fix version detection for mx6q/mx6dl revD1Fabio Estevam
The detection of the revD1 version is based on the presence of the PMIC. Currently revb1 device trees are used for mx6q/mx6dl variants, which do not have the PMIC nodes. This causes revD1 boards to be incorrectly be detected as revB1. Fix this issue by using the revd1 device trees, so that the PMIC node can be found and then the PMIC can be detected by reading its register ID. Imported the revd1 device trees from mainline kernel version 5.7-rc1. Reported-by: Heiko Schocher <hs@denx.de> Reported-by: Derek Atkins <derek@ihtfp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Derek Atkins <derek@ihtfp.com> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-17imx8mm_evk: adjust dram size in case bl32 is usedIgor Opaniuk
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area. BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory"). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-04-17verdin-imx8mm: adjust dram size in case bl32 is usedIgor Opaniuk
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area. BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory"). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-04-17imx8qxp_mek: Start with USDHC2 unpoweredFabio Estevam
After triggering a "reboot" command in Linux the following hang in SPL is observed: U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300) Normal Boot WDT: Not found! Trying to boot from MMC2_2 spl: mmc init failed with error: -70 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### This error happens because the CMD_ERR bit is set in the IRQ status register after booting from Linux. To ensure a fresh start, force the VMMC supply to get unpowered first. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17board: tqc: tqma6_mba6: switch to device modelMichael Krummsdorf
Ethernet, usdhc2 and i2c1 interfaces are probed by dm drivers. Therefor init functions in board file are not necessary. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17board: tqc: tqma6: hw init code disabled for device modelMichael Krummsdorf
Keep code for non-dm configuration of baseboard WRU4. It cannot be upgraded to device model as we have no suitable device tree for it. These changes were not run-tested on WRU4, only compile-tested. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17board: tqc: tqma6: mba6: apply default Kconfig for device modelMichael Krummsdorf
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17tqma6: resurrect support by supplying correct SYS_TEXT_BASEMarkus Niebel
reason: SYS_TEXT_BASE was moved to Kconfig. Give reasonable defaults in board specific Kconfig. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17mx6ullevk: Enable Ethernet supportFabio Estevam
Add Ethernet support using DM_ETH. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx6ul_evk: Remove FEC related board codeFabio Estevam
mx6ul_evk uses DM_ETH, so there is no need to have board code to setup the FEC IOMUX and to register the network ports via the old board_eth_init() method. Remove these FEC related pieces of code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-16doc: update reference to README.boardPatrick Delaunay
Update reference in files detected by scripts/documentation-file-ref-check doc/README.<board> => board/<board>/README Files moved in board directory in commit 702e6014f15b ("doc: cleanup - move board READMEs into respective board directories")' Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: update reference to README.imx8imagePatrick Delaunay
Update reference in many files detected by scripts/documentation-file-ref-check README.imx8image => imx/mkimage/imx8image.txt Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: update reference to README.imximagePatrick Delaunay
Update reference in many files detected by scripts/documentation-file-ref-check README.imximage => imx/mkimage/imximage.txt Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16sandbox: implement ft_board_setup()Heinrich Schuchardt
Currently we are not able to test reservations created by ft_board_setup(). Implement ft_board_setup() to create an arbitrary reservation and enable OF_BOARD_SETUP. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromum.org>
2020-04-15board: stm32mp1: correct CONFIG_IS_ENABLED usage for LEDPatrick Delaunay
Use the correct macro to test presence CONFIG_LED: replace CONFIG_IS_ENABLED(CONFIG_LED) by CONFIG_IS_ENABLED(LED) Issue see during review unrelated patch "board: stm32mp1: update management of boot-led" http://patchwork.ozlabs.org/patch/1264823/ Cc: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-15configs: stm32mp1: replace STM32MP1_TRUSTED by TFABOOTPatrick Delaunay
Activate ARCH_SUPPORT_TFABOOT and replace the arch stm32mp specific config CONFIG_STM32MP1_TRUSTED by the generic CONFIG_TFABOOT introduced by the commit 535d76a12150 ("armv8: layerscape: Add TFABOOT support"). This config CONFIG_TFABOOT is activated for the trusted boot chain, when U-Boot is loaded by TF-A. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-15ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2Marek Vasut
Add DT entries, Kconfig entries and board-specific entries to configure FMC2 bus and make KS8851-16MLL on that bus accessible to U-Boot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-14arm: mvebu: turris_mox: fix PCIe ranges in device treeMarek Behún
Use the new a3700_fdt_fix_pcie_regions function in turris_mox.c so that MOX boards with 4 GB RAM are fully supported. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: turris_mox: support devices with RAM > 1 GBMarek Behún
In order to support MOX boards with 2 GB or 4 GB RAM, we use the new Armada-3700 generic code for memory information structures. This is done by removing dram_init and dram_init_banksize from turris_mox.c, in order for the generic, weak definitions to be used. Also for boards with 4 GB RAM it is needed to increase CONFIG_NR_DRAM_BANKS to 2 in turris_mox_defconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: turris_mox: sort headers alphabeticallyMarek Behún
Sort #includes alphabetically, the only exception is common.h, which is included first in most parts of U-Boot. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: turris_mox: don't use hardcoded addressesMarek Behún
Use macro MVEBU_REGISTER to access register addresses instead of hardcoded addresses. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: turris_mox: Setup Linux's device tree before bootMarek Behún
Patch Linux's device tree according to which Mox modules are connected. Linux's device tree has all possible Mox module nodes preprogrammed, but in disabled state. If MOX B, MOX F or MOX G module is present, this code enables the PCI node. For the network modules (MOX C, MOX D and MOX E) are present, the code enables corresponding ethernet and swtich nodes and DSA connections. For the SFP cage the SFP GPIO controller node and SFP node are also enabled. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: turris_mox: Fix early SPI communicationMarek Behún
The SPI clock signal changes value when the SPI configuration register is configured. This can sometimes lead to the device misinterpreting the enablement of the SPI controller as actual clock tick. This can be solved by first setting the SPI CS1 pin from GPIO to SPI mode, and only after that writing the SPI configuration register. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: clearfog: Use Pro DT by defaultJoel Johnson
Switch to explicitly using the Pro variant DT, which has been available since Linux 4.11. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: clearfog: move ENV params to KconfigJoel Johnson
Migrate the values for ENV_SIZE and ENV_OFFSET into board specific Kconfig defaults so they're more accessible for configuration. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: clearfog: add SPI offsetsJoel Johnson
Add reasonable default SPI offsets and ENV size when configured to boot from SPI flash. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: clearfog: Unify DT selection pathsJoel Johnson
Unify the location of DT selection into board_late_init instead of split between detection and static configuration paths. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: clearfog: Add SATA mode flagsJoel Johnson
The mPCIe slots on ClearFog Pro and ClearFog Base may be alternately configured for SATA usage. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: clearfog: Add option for 2.5 Gbps SFPJoel Johnson
While newer Linux kernels provide autoconfiguration of SFP, provide an option for setting in U-Boot Kconfig for use prior to booting. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: clearfog: initial ClearFog Base variantJoel Johnson
Add a unique entry for ClearFog Base variant, reflected in the board name and adjusted SerDes topology. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: clearfog: use Pro name by defaultJoel Johnson
Make the board version printed indicate the Pro variant default. Also adjust static name casing to match what is expected for EEPROM product name to share string constants. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14am335x, guardian: boot stage feedback in headless modeMoses Christopher
This patch enables the guardian board to provide feedback about the boot stage in headless mode. The on-board led would behave in the following pattern * U-boot -> GLOW LED * Linux -> BLINK LED [HEART-BEAT PATTERN] Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-04-14ddr: marvell: a38x: Allow boards to specify CK_DELAY parameterChris Packham
For some layouts it is necessary to adjust the CK_DELAY parameter to successfully complete DDR training. Add the ability to specify the CK_DELAY in the mv_ddr_topology_map. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2020-04-13Merge branch 'next'Tom Rini
Pull in changes that have been pending in our 'next' branch. This includes: - A large number of CI improvements including moving to gcc-9.2 for all platforms. - amlogic, xilinx, stm32, TI SoC updates - USB and i2c subsystem updtaes - Re-sync Kbuild/etc logic with v4.19 of the Linux kernel. - RSA key handling improvements
2020-04-08Merge tag 'u-boot-amlogic-20200406' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic into next - clk: meson-g12a: missing break - sync all Amlogic DT from Linux v5.6-rc2 - MMC clock fixups - add support for Libre Computer AML-S905D-PC and AML-S912-PC
2020-04-07Merge tag 'xilinx-for-v2020.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.07 common: - Align ENV_FAT_INTERFACE - Fix MAC address source print log - Improve based autodetection code xilinx: - Enable netconsole Microblaze: - Setup default ENV_OFFSET/ENV_SECT_SIZE Zynq: - Multiple DT updates/fixes - Use DEVICE_TREE environment variable for DTB selection - Switch to single zynq configuration - Enable NOR flash via DM - Minor SPL print removal - Enable i2c mux driver ZynqMP: - Print multiboot register - Enable cache commands in mini mtest - Multiple DT updates/fixes - Fix firmware probing when driver is not enabled - Specify 3rd backup RAM boot mode in SPL - Add SPL support for zcu102 v1.1 and zcu111 revA - Redesign debug uart enabling and psu_init delay - Enable full u-boot run from EL3 - Enable u-boot.itb generation without ATF with U-Boot in EL3 Versal: - Enable distro default - Enable others SPI flashes - Enable systems without DDR Drivers: - Gem: - Flush memory after freeing - Handle mdio bus separately - Watchdog: - Get rid of unused global data pointer - Enable window watchdog timer - Serial: - Change reinitialization logic in zynq serial driver Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-07colibri_imx6: set gpr1 ENET_CLK_SELIgor Opaniuk
This fixes the issue when PHY auto negotiation never completes. Fixes: 431cd76dd8("colibri_imx6: migrate to DM_ETH") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-06arm64: xilinx: Never touch DDR if system has no DDRMichal Simek
If DDR is not mapped do not touch it. Default XILINX_OF_BOARD_DTB_ADDR is pointing to DDR. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Reorder parameters for zynqmp_mmio_write()Michal Simek
Parameter order is not correct based on zynqmp_mmio_write() declaration. Fixes: be52372ff1bb ("arm64: zynqmp: Use zynqmp_mmio_read/write functions") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Move timeout for clock propagation below psu_initMichal Simek
Delay required for clock propagation is tighly coupled with initialization done in psu_init(). That's why call it also for u-boot proper with CONFIG_ZYNQMP_PSU_INIT_ENABLED enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Add support for debug uart also for U-Boot properMichal Simek
board_early_init_f() is the right location where debug uart can be configurated (after MIO initialization). The patch is taking this call from SPL to also make it available for U-Boot proper. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp Add support for zcu111 revAMichal Simek
Add low level configuration for zcu111 for easier SPL run. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp Add support for zcu102 rev1.1Michal Simek
rev1.1 has different DDR sodimm module that's why it requires different DDR configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-02 21:24:49 +0000