summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2008-05-19Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk
2008-05-19ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selectionStefan Roese
When SATA is selected (via jumper J6) we need to disable the first PCIe node in the device tree, so that Linux doesn't initialize it. Otherwise the Linux SATA driver will fail to detect the devices. The same goes the other way around too. So if PCIe is selected we need to disable the SATA node in the device tree. This is because PCIe port 0 and SATA on 460EX share the same pins (multiplexed) and we have to configure in U-Boot which peripheral is enabled. Signed-off-by: Stefan Roese <sr@denx.de>
2008-05-19i386: Fix multiple definitions of __show_boot_progressJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-19sc530_spunk: add missing SOBJS entryJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-19sc520_spunk: Fix flashJean-Christophe PLAGNIOL-VILLARD
flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules flash.c:398: error: label at end of compound statement Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-15TQM8272: fix out-of-tree buildingWolfgang Denk
...and add to MAKEALL script Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-14Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk
2008-05-14Fix config files for out-of-tree buildingWolfgang Denk
Several board/<...>/config.mk files include dynamically built (by the Makefile) config files but used the wrong file name of $(TOPDIR)/board/$(BOARDDIR)/config.tmp instead if the correct $(OBJTREE)/board/$(BOARDDIR)/config.tmp The bug is nasty because the build result is correct for the (normal) in-tree builds, and because 'sinclude' is used no errors get raised even for out-of-tree build tests. But out-of-tree builds use an incomplete and thus usually incorrect configuration... Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-14ppc4xx: Fix bogus Canyonlands config.mkStefan Roese
This patch fixes the canyonlands config.mk file to enable correct out-of-tree builds. Thanks to Wolfgang Denk for spotting this. Signed-off-by: Stefan Roese <sr@denx.de>
2008-05-14linkstation_HGLAN: Fix out of tree building.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-13ppc4xx: Add 405EX(r) revision C PVR definitions and detection codeStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2008-05-10Fix @ -> <at> substitutionStelian Pop
When applying the AT91CAP9 patches upstream, something transformed the '@' character into the ' <at> ' sequence. The patch below restores the original form in all the places where it has been modified (the AT91CAP9 files, the AT91SAM9260 files which were copied from AT91CAP9, and a couple of other files where the ' <at> ' sequence was present). Signed-off-by: Stelian Pop <stelian@popies.net>
2008-05-10Update origin and copyright information in arch-at91sam9 header filesStelian Pop
When doing the AT91CAP9/AT91SAM9 port, a number of header files were copied from the Linux kernel sources. This patch explicitly specifies this origin for all the copied headers, and for those missing copyright information, adds it. Additionaly, the header file 'at91sam926x_mc.h' has been superceeded in the latest kernel sources by 'at91sam9_smc.h'. The copyright information has been confirmed by the AT91 Linux kernel maintainer, Andrew Victor <avictor.za@gmail.com>. Signed-off-by: Stelian Pop <stelian@popies.net>
2008-05-10Add copyright information in Atmel boards partition.cStelian Pop
When Ulf did the dataflash.c cleanup, he didn't add his copyright on the new created files. This patch fixes the problem. Signed-off-by: Stelian Pop <stelian@popies.net>
2008-05-10mx31ads: fix 32kHz clock handlingGuennadi Liakhovetski
According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value. Also fix a typo when verifying a jumper configuration. While at it, make two needlessly global functions static. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-05-10Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk
2008-05-09Merge branch 'master' of /home/wd/git/u-boot/master/Wolfgang Denk
2008-05-09Mail address change, documentation modifiedVlad Lungu
Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
2008-05-08ppc4xx: acadia: Add fdt support and fix section overlap problemStefan Roese
This patch adds fdt (flattened device tree) support to the AMCC Acadia eval board. This increases the image size and it doesn't fit anymore into 256kByte. Since we didn't want to remove features from the configuration, we decided to increase the U-Boot image size (add one flash sector). Also changed the default environment definition to make it independent of such changes. Signed-off-by: Stefan Roese <sr@denx.de>
2008-05-08ppc4xx: Add device tree support to AMCC YosemiteIra Snyder
Add support for booting with a device tree blob. This is needed to boot ARCH=powerpc kernels. Also add support for setting the eth0 mac address via the ethaddr variable. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Stefan Roese <sr@denx.de>
2008-05-0785xx: Limit CPU2 workaround to parts that have the errataAndy Fleming
Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-05-03Fix defined but not used build warningMarcel Ziswiler
- warning: 'srom' defined but not used Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-05-03MPC8610HPCD: Drop -O2 from the build flagsKumar Gala
Make the flags use -Os like all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk
2008-04-2985xx/86xx: Rename ext_refrec to timing_cfg_3 to match docsKumar Gala
All the 85xx and 86xx UM describe the register as timing_cfg_3 not as ext_refrec. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29ppc4xx: Complete remove bogus dflush()Stefan Roese
Since the current dflush() implementation is know to have some problems (as seem on lwmon5 ECC init) this patch removes it completely and replaces it by using clean_dcache_range(). Tested on Katmai with ECC DIMM. Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-29ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()Stefan Roese
As it seems the "old" ECC initialization routine by using dflush() didn't write all lines in the dcache back to memory on lwmon5. This could lead to ECC error upon Linux booting. This patch changes the program_ecc() routine to now use clean_dcache_range() instead of dflush(). clean_dcache_range() uses dcbst which is exactly what we want in this case. Since dflush() is known is cause problems, this routine will be removed completely and replaced by clean_dcache_range() with an additional patch. Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-28LinkStation: fix compiler warning, add a maintainerGuennadi Liakhovetski
out_8 wants a pointer to an unsigned as the first argument. Add a maintainer for Linkstation boards. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2008-04-28katmai: fix section overlap problemWolfgang Denk
Since we didn't want to remove features from the configuration, we decided to increase the U-Boot image size (add one flash sector). Also changed the default environment definition to make it independent of such changes. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Stefan Roese <sr@denx.de>
2008-04-26i.MX31: Enable SPI and MC13783/RTC support for the Litekit boardMagnus Lilja
This patch enables SPI and MC13783/RTC support for the Litekit board. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2008-04-26MPC8544DS: decode pcie3 end-point configuration correctly.Ed Swarthout
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-26Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk
2008-04-25ppc4xx: Add bootcount limit handling for APC405 boardsMatthias Fuchs
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-04-25Merge branch 'master' of /home/wd/git/u-boot/lwmon5Wolfgang Denk
Conflicts: common/cmd_bootm.c common/cmd_log.c include/common.h post/board/lwmon5/Makefile post/board/lwmon5/dsp.c post/board/lwmon5/dspic.c post/board/lwmon5/fpga.c post/board/lwmon5/gdc.c post/board/lwmon5/sysmon.c post/board/lwmon5/watchdog.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-24i.MX31: Fix architecture numbers for ADS and Litekit boardsMagnus Lilja
Correct the Linux architecture number for i.MX31 Litekit and ADS boards. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2008-04-24Memory footprint optimizationsBartlomiej Sieka
As suggested by Wolfgang Denk: - image printing functions: - remove wrappers - remove indentation prefix from functions' signatures - merge getenv_verify and getenv_autostart into one parametrized function Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-04-24MX31ADS environment variable update, spi and rtc supportGuennadi Liakhovetski
Update MX31ADS default environment to better match the flash layout and the memory map, support SPI and RTC. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-22Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk
2008-04-22lwmon5 watchdog: limit trigger rateYuri Tikhonov
Limit the rate of h/w watch-dog triggering on the LWMON5 board by the CONFIG_WD_MAX_RATE value. Note that an earlier version of this patch which used microseconds instead of ticks dis not work. The problem was that we used usec2ticks() to convert microseconds into ticks. usec2ticks() uses get_tbclk(), which in turn calls get_sys_info(). It turns out that this function does a lot of prolonged operations (like divisions) which take too much time so we do not trigger the watchdog in time, and it resets the system. Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-04-22ppc4xx: Small coding style cleanup for the latest esd patchesStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-22ppc4xx: Update CPU strapping for PMC440 boardsMatthias Fuchs
This patch removes the temporary 'test' strapping option of the sbe command. The '667' strapping option now uses a PLB/PCI divider of 3. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-04-22ppc4xx: Remove unused APC405 strataflash driverMatthias Fuchs
The APC405 board support has been migrated to use the common CFI flash driver. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-04-22ppc4xx: Update APC405 board supportMatthias Fuchs
- enable esd's auto_update mechanism - fix LCD support on latest hardware revision (uses other LCD controller) - support alternative flash layout on rev. 1.8 boards - coding style cleanup Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-04-22ppc4xx: update esd's common auto_update code for 405 boardsMatthias Fuchs
- Coding style cleanup (long lines) - improve handling of protected flash regions - remove dead code Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-04-22ppc4xx: Update esd's common LCD code for 405 boardsMatthias Fuchs
- Coding style cleanup (long lines) - Add s1d13505 support - Make some functions return a result code instead of void Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-04-22ppc4xx: Update FPGA image for APC405 boardsMatthias Fuchs
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-04-22ppc4xx: Update bootlogo for APC405 boardsMatthias Fuchs
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-04-18Coding Style cleanup, update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-18MX31ADS network and flash updatesGuennadi Liakhovetski
This patch allows U-Boot to use buffered writes to the Spansion NOR flash installed on this board, and eliminates long delays in network transfers after the board startup. Also modify flash layout to embed main and redundant environment blocks in the U-Boot image. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-18Support for the MX31ADS evaluation board from FreescaleGuennadi Liakhovetski
This patch adds support for the MX31ADS evaluation board from Freescale, initialization code is copied from RedBoot sources, also provided by Freescale. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
generated by cgit (git 2.34.1) at 2024-12-27 21:23:21 +0000