summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2019-01-25poplar: clean up board level mmc initialization codeShawn Guo
We have converted mmc to driver model on Poplar. So let's clean up board level mmc initialization code. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-01-24Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2019-01-24board: topic-miamiplus: Run IO PLL at 1000 MHzMike Looijmans
The miamiplus can use GEM0 through MIO pins, which requires a 125 MHz TX clock to be generated. With the IO PLL at 1200 MHz this isn't possible, so change it to run at 1000 and adjust the divisors accordingly. Also set the GEM0 clock source to MIO instead of EMIO. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24topic-miamiplus: Run CPU at 800MHz for speedgrade-2Mike Looijmans
The miamiplus contains a speedgrade-2 device, which may run the CPU at 800MHz. Change the PLL setting to 800MHz, and adapt the setpoints in the devicetree. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Fix tcminit help text alignmentMichal Simek
Trivial patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Fix mmc node names to be in sync with kernelSiva Durga Prasad Paladugu
This patches renames sd nodes in dts to be in line with kernel. This patch also modifies the references for the same in code. It checks mmc first to have no time penalty for new DT node names based on left-to-right expression evaluation. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Protect board_late_init functionMichal Simek
Function should be compiled only when CONFIG_BOARD_LATE_INIT is defined. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-23MSCC: Add board support for Serval SoC family.Horatiu Vultur
Add board support and configuration for Jaguar2 SoC family. The detection of the board type is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MSCC: Add board support for Servalt SoC familyHoratiu Vultur
Add board support, configuration and DTS for Servalt SoC family. Currently there is one board in this family. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MIPS: mscc: ocelot: add switch reset supportGregory CLEMENT
On some ocelots platform a workaround is needed in order to be able to reset the switch without resetting the DDR. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-21ARM: mvebu: add support for Allied Telesis x530Chris Packham
This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21board: mvebu: drop unused ETH_PHY macro definitionsBaruch Siach
These macros are not used anywhere in the boards code. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Mario Six <mario.six@gdsys.cc> Cc: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Support 1 GB version of Turris MoxMarek Behún
Use get_ram_size to determine if the RAM size on Turris Mox is 512 MiB or 1 GiB. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Read info (and ethaddrs) from OTPMarek Behún
Add support for reading One-Time Programmable memory via mailbox, which communicates with CZ.NIC's firmware on the Secure Processor (Cortex-M3) of Armada 3720. Display product serial number and additional info, and also set MAC addresses. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Check and configure modulesMarek Behún
Check if Mox modules are connected in supported mode, then configure the MDIO addresses of switch modules. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Change SERDES map depending on module topologyMarek Behún
When SFP module is connected directly to CPU module we want the SGMII lane speed at 1.25 Gbps. This is a temporary solution till there is a comphy driver in the kernel capable of changing SGMII speed at runtime. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Cosmetic restructurizationMarek Behún
Restructure the board initialization source. Remove the module_topology environment variable since it won't be needed. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-18Merge tag 'fsl-qoriq-for-v2019.04-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Add TFA boot flow for more boards Add TFA boot defconfig for ls1088a and ls2088a. Add dts fixup for PCIe endpoint and root complex.
2019-01-18board: sun50i-h5: Add Emlid Neutis N5 supportAleksandr Aleksandrov
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT module, DDR3 RAM and eMMC. - add neutis-devboard target to dtb makefile - add dtsi file for Neutis N5 needs - add config file for Neutis N5 Dev board Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: update proper commit head] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-18sunxi: board: Add i2c initialization for sun50iStefan Mavrodiev
To use TWI0/1/2 the user can select CONFIG_I2C#_ENABLE. However even the controller is enabled, the mux for the pins are not set. This patch follows the existing mux method. Since the pads are different, separate check is added for each i2c. Tested with A64-SOM204 board. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-18configs: Remove am43xx_evm_ethboot_defconfigVignesh R
am43xx_evm_ethboot_defconfig is not being actively used and has not been moved to DM or DT. Also, ethboot cannot be tested on AM43xx EVM as such due EVM limitations. Therefore delete it. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18configs: Remove unused am335x_evm defconfigsVignesh R
These defconfigs don't seem be actively used any more, and have not been moved to adapt DM or DT. Therefore delete them. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18adding saveenv-command for bananapi r2Frank Wunderlich
bananapi r2 can be booted from sd-card and emmc saving the environment have to choose the storage from which the device has booted also the offset is set to 1MB to make sure env is written to block "user data area" between uboot and first partition https://www.fw-web.de/dokuwiki/lib/exe/fetch.php?cache=&media=bpi-r2:boot-structure.png Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-01-18work_92105: Kconfig: spelling fixesChris Packham
Signed-off-by: Chris Packham <judge.packham@gmail.com>
2019-01-17Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: mscc: various enhancements for Luton and Ocelot platforms - MIPS: mscc: added support for Jaguar2 platform - MIPS: optimised SPL linker script - MIPS: bcm6368: fix restart flow issues - MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards - MIPS: mt7688: small fixes and enhancements - mmc: compile-out write support if disabled
2019-01-17armv8: ls2088ardb: Update MAINTAINERSYork Sun
Signed-off-by: York Sun <york.sun@nxp.com> CC: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2019-01-17armv8: ls1088ardb: Update MAINTAINERSYork Sun
Signed-off-by: York Sun <york.sun@nxp.com> CC: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2019-01-17ls1046aqds: Bypass xfi port fixup for KR modeFlorinel Iordache
u-boot makes a fixup for LS1046AQDS board to setup the properties 'fixed-link' and 'phy-connection-type' to 'xgmii' but in case of backplane mode this fixup is not correct because it causes the KR link to fail and so it must be bypassed in order to keep the link in KR mode as it is defined in DTS. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> [YS: Fix compiling warning] Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefiMian Yousaf Kaukab
fsl-mc lazyapply command applies dpl from efi_exit_boot_services(). Status of fsl-mc node in working fdt is updated at this stage. However, an efi application like grub may already have copied the fdt. So the updates to fdt done at efi_exit_boot_services() may not be visible to the OS. Fix it by updating fdt earlier if fsl-mc lazyapply command is used. Fixes: b7b8410a8f (ls2080: Exit dpaa only right before exiting U-Boot) Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls2088aqds: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls2088aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls2088ardb: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls2088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT - remove EL3 specific erratas for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1088aqds: Add TFABOOT supportPankit Garg
TFABOOT support includes: - ls1088aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1088ardb: Add TFABOOT supportPankit Garg
TFABOOT support includes: - ls1088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-16MSCC: Add board support for Jaguar2 SOC familyHoratiu Vultur
Add board support and configuration for Jaguar2 SOC family. The detection of the board type in this family is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16mips: ocelot: Enable use of serial gpio for LEDLars Povlsen
This enables the use of the MSCC serial GPIO driver to control the LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: luton: Enable use of serial gpio for LEDLars Povlsen
This enables the use of the MSCC serial GPIO driver to control the LEDs on the MSCC VCoreIII 'luton' SoC. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: mscc: luton+ocelot: Remove board config options, do probingLars Povlsen
As we are moving to multi-dtb and board detection, remove static board config options, and introduce board probing instead. Luton: This add single-binary support for the two MSCC luton-based reference boards - pcb090 and pcb091. The SoC chip ID is used to determine the board type. Ocelot: This add single-binary support for the two MSCC ocelot-based reference boards - pcb120 and pcb123. The PHY ids on specific ports are used to determine the board type. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-15omap3: igep00x0: Switch to using TI_COMMON_CMD_OPTIONEnric Balletbo i Serra
Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15omap3: igep00x0: Remove unmaintained IGEP0032 defconfigEnric Balletbo i Serra
The IGEP0032 board was never officially pushed upstream and actually I don't have access to this hardware, unless someone with the hardware wants to start working on this doesn't makes sense have this defconfig here. So remove it. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-14poplar: add DWC2 OTG gadget supportShawn Guo
It enables DWC2 OTG gadget driver support for Poplar board. As usb2_phy_init() is being always called from board_init(), we can save the call from board_usb_init(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-01-10Merge tag 'u-boot-imx-20190110' of git://git.denx.de/u-boot-imxTom Rini
Fixes for 2019.01
2019-01-09toradex: colibri_vf: fix memory initializationStefan Agner
Commit 3f353ceccbbb ("vf610: refactor DDRMC code") changed on-die termination (ODT) values from 120 Ohm to 60 Ohm and enabled a static read/write leveling which has not been tested with this board. This commit reverts both changes and makes sure that memory gets initialized as it has been done before the mentioned commit. Fixes: 3f353ceccbbb ("vf610: refactor DDRMC code") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-01-09igep003x: MAINTAINER: Remove myself as maintainer and add JavierEnric Balletbo i Serra
I can't continue maintaining the board because I don't have access to the hardware anymore, so remove myself from the entry and add Javier who has volunteered to help and maintain the board. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Javier Martínez Canillas <javier@dowhile0.org>
2019-01-01Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
2019-01-01imx: mx53ppd: fix build errorPeng Fan
board/ge/mx53ppd/mx53ppd.c: In function 'board_late_init': board/ge/mx53ppd/mx53ppd.c:359:23: error: passing argument 2 of 'read_vpd' from incompatible pointer type [-Werror=incompatible-pointer-types] res = read_vpd(&vpd, vpd_callback); ^~~~~~~~~~~~ In file included from board/ge/mx53ppd/mx53ppd.c:37:0: board/ge/mx53ppd/../../ge/common/vpd_reader.h:19:5: note: expected 'int (*)(struct vpd_cache *, u8, u8, u8, size_t, const u8 *) {aka int (*)(struct vpd_cache *, unsigned char, unsigned char, unsigned char, unsigned int, const unsigned char *)}' but argument is of type 'int (*)(void *, u8, u8, u8, size_t, const u8 *) {aka int (*)(void *, unsigned char, unsigned char, unsigned char, unsigned int, const unsigned char *)}' int read_vpd(struct vpd_cache *cache, ^~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-01-01imx: add i.MX8MQ EVK supportPeng Fan
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-01-01embestmx6boards: Add SPL supportFabien Lahoudere
In order to boot faster with falcon mode, we need to add SPL support to riotboard. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2019-01-01imx: imx8qxp_mek: imximage: remove config.hPeng Fan
config.h is not needed, remove it. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01board: ge: Move VPD reading to the vpd_readerDenis Zalevskiy
Merge functionality duplicated in bx50v3 and mx53ppd: the logic is the same except that process_vpd is called at different phases. Also read_vpd could end up in error, so there is no VPD data in this case - it shouldn't be processed. Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
generated by cgit (git 2.34.1) at 2024-12-29 19:44:20 +0000