summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2007-07-26ppc4xx: Add support for AMCC 405EP Taihu boardJohn Otken
Signed-off-by: John Otken <john@softadvances.com>
2007-07-24ppc4xx: lwmon5: Support for 128 MByte NOR FLASH addedStefan Roese
The used Intel NOR FLASH chips have internally two dies, and are now treated as two seperate chips. Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-24ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)Stefan Roese
As suggested by Hakan Eryigit, here an updated setup for the lwmon5 interrupt controller. Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-20POST: Add ECC POST for the lwmon5 boardPavel Kolesnikov
This patch adds ECC Post test for the Lwmon5 board based on PPC440EPx to U-Boot. Signed-off-by: Pavel Kolesnikov <concord@emcraft.com> Acked-by: Yuri Tikhonov <yur@emcraft.com> Acked-by: Stefan Roese <sr@denx.de>
2007-07-16Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-07-16ppc4xx: Code cleanupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-16ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-16ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.cStefan Roese
The new boardspecific DDR2 controller configuration is used for the Yucca board. Now the Yucca board with 440SPe Rev. A chips is also supported. Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-13[PCS440EP] - The DIAG LEDs are now blinking, if an error occurHeiko Schocher
- fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-12Merge with /home/tur/git/u-boot#cm1_qp1Wolfgang Denk
2007-07-11CM1.QP1: Support for the Schindler CM1.QP1 board.Bartlomiej Sieka
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-07-11[PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failedHeiko Schocher
- now the Flash ST M29W040B is supported (not tested) - fix the "led" command - fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-10Coding style cleanup; update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-07-09Merge with /home/hs/Atronic/u-bootWolfgang Denk
2007-07-06Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk
2007-07-06Code cleanup and default config update for STC GP3 SSA board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-07-04resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPXNiklaus Giger
Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
2007-07-04ppc4xx: Update lwmon5 boardStefan Roese
- Add optional ECC generation routine to preserve existing RAM values. This is needed for the Linux log-buffer support - Add optional DDR2 setup with CL=4 - GPIO50 not used anymore - Lime register setup added Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-03Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk
2007-06-25Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-06-25[PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANGHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-25ppc4xx: Add pci_pre_init() for 405 boardsStefan Roese
This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-25ppc4xx: Maintenance patch for esd's CPCI405 derivatsMatthias Fuchs
-add pci_pre_init() for pci interrupt fixup code -disable phy sleep mode via reset_phy() function -use correct io accessors -cleanup Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-06-22Coding stylke cleanup; rebuild CHANGELOGWolfgang Denk
2007-06-22Extend POST support for PPC440Igor Lisitsin
Added memory, CPU, UART, I2C and SPR POST tests for PPC440. Signed-off-by: Igor Lisitsin <igor@emcraft.com> --
2007-06-22[PCS440EP] upgrade the PCS440EP board:Heiko Schocher
- Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-20Coding style cleanup. Refresh CHANGELOG.Wolfgang Denk
2007-06-20Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-06-19ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval boardStefan Roese
This patch adds a board command to configure the I2C bootstrap EEPROM values. Right now 533 and 667MHz are supported for booting either via NOR or NAND FLASH. Here the usage: => bootstrap 533 nor ;to configure the board for 533MHz NOR booting => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-19[ppc4xx] Fix problem with NAND booting on AMCC AcadiaStefan Roese
The latest changes showed a problem with the location of the NAND-SPL image in the OCM and the init-data area (incl. cache). This patch fixes this problem. Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-19[ppc4xx] Change board/amcc/acadia/cpr.c to pll.cStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-15[ppc4xx] Add initial lwmon5 board supportStefan Roese
This patch adds initial support for the Liebherr lwmon5 board euqipped with an AMCC 440EPx PowerPC. Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-08TQM5200: Add Flat Device Tree support, update default env. accordingly.Bartlomiej Sieka
Signed-off-by: Jan Wrobel <wrr@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-06-06Coding Style cleanup; generate new CHANGELOG file.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-06-06Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk
2007-06-06Merge with /home/wd/git/u-boot/custodian/u-boot-armWolfgang Denk
2007-06-06Merge with /home/stefan/git/u-boot/acadia-nand-bootStefan Roese
2007-06-06ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval boardStefan Roese
This patch adds NAND booting support for the AMCC Acadia eval board. Please make sure to configure jumper J7 to position 2-3 when booting from NOR, and to position 1-2 when booting for NAND. I also added a board command to configure the I2C bootstrap EEPROM values. Right now only 267MHz is support for booting either via NOR or NAND FLASH. Here the usage: => bootstrap 267 nor ;to configure the board for 267MHz NOR booting => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-05Merge branch 'mpc8641'Jon Loeliger
2007-06-05mpc8641 image size cleanupEd Swarthout
e600 does not have a bootpg restriction. Move the version string to beginning of image at fff00000. Resetvec.S is not needed. Update flash copy instructions. Add tftpflash env variable Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-06-04Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk
2007-06-01ppc4xx: Add missing file for Bamboo NAND booting supportStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-01Merge with /home/stefan/git/u-boot/bamboo-nandStefan Roese
2007-06-01ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHzStefan Roese
This patch undoes the patch by Jeff Mann with commit-id ada4697d. As suggested by AMCC it is not recommended to dynamically change the EBC speed after bootup. So we undo this change to be on the safe side. Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-01ppc4xx: Update Sequoia NAND booting support with ECCStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-01ppc4xx: Prepare Bamboo port for NAND booting supportStefan Roese
This patch updates the "normal" Bamboo NOR booting port, so that it is compatible with the coming soon NAND booting Bamboo port. It also enables the 2nd NAND flash on the Bamboo. Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-31Merge with /home/wd/git/u-boot/stx-gp3ssaWolfgang Denk
2007-05-31Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-28Merge with /home/tur/git/u-boot#motionproWolfgang Denk
2007-05-27Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.Bartlomiej Sieka
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
generated by cgit (git 2.34.1) at 2025-01-01 11:23:01 +0000