summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2019-10-08x86: Rename existing FSP code to fsp1Simon Glass
Since there is now a new version of the FSP and it is incompatible with the existing version, move the code into an fsp1 directory. This will allow us to put FSP v2 code into an fsp2 directory. Add a Kconfig which defines which version is in use. Some of the code in this new fsp1/ directory is generic across both FSPv1 and FSPv2. Future patches will address this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-06MAINTAINERS: Update my email addressMaxime Ripard
I'm not at bootlin anymore, and my mail address doesn't work any longer. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-04ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPLAdam Ford
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-10-04board: ti: am654: Disable TRNG node for HS devicesAndrew F. Davis
On HS devices the access to TRNG is restricted on the non-secure ARM side, disable the node in DT to prevent firewall violations. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-01rpi4: enable dram bank initializationMatthias Brugger
When booting through the efi stub, the memory map get's created by reading the dram bank information. Depending on the version of the RPi4 this information changes. Read the device tree to initialize the dram bank data structure. This way the kernel is able to access the whole range of available memory. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add emmc hs200 support - Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-13MAINTAINERS: Change fsl-qoriq, mpc86xx, mpc85xx maintainersPriyanka Jain
Change maintainers to Priyanka Jain for fsl-qoriq, mpc85xx Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-09-12lx2160: Correct serdes frequency print.Meenakshi Aggarwal
Suffix serdes frequency print with MHz Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12board: lx2160aqds: add support for SerDes protocol 14Florin Chiculita
Add SerDes1 protocol 14 in the list of supported protocols. This configuration enables one high-speed 100G port and PCIe x4. Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12board: lx2160aqds: fix ethernet-phy compatible propertyFlorin Chiculita
The code that generates the compatible property concatenates the ethernet phy id and clause-compatible information without separating them with a comma, resulting into no ethernet phy driver getting loaded by Linux kernel. Suffix phy_id_compatible_str with comma to fix this Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12board: fsl: lx2160a: implement board_fix_fdtPankaj Bansal
lx2160a rev1 and rev2 SoC has different pcie controller. The pcie controller device tree node fields "compatible" and registers names needs to be updated accordingly This change in device tree is handled as part of fdt fixups. These changes would only be applied if the soc revision is not rev1. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-11doc: lion_rk3368: use idbloader.img for rk3368Matwey V. Kornilov
Makefile now produces ready-to-deploy idbloader.img file. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-07Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Initial DM conversion
2019-09-06Merge tag 'rpi-next-2019.10' of https://github.com/mbgg/u-bootTom Rini
- fix mailbox status register used for polling - fix bcm2835_sdhost to wait long enough for a transfer to complete - increase kernel image size from 8 MB to 64 MB on arm64 - add support for RPi4 - add prefixes for raspberry pi related stuff to git-mailrc
2019-09-06RPI: Add memory map for bcm2711Andrei Gherzan
Define the memory map for the BCM2711 based on the dt configuration available in the Raspberry Pi kernel fork. Signed-off-by: Andrei Gherzan <andrei@balena.io> [mb: BCM2838 -> BCM2711] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06RPI: Add entry for Raspberry Pi 4 model BAndrei Gherzan
The Raspebrry Pi 4 uses the new revision code scheme as documented by the foundation. This change adds an entry for this board as well. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-04net: dwc_et_qos: update weak function board_interface_eth_initPatrick Delaunay
Align the board and driver prototype for board_interface_eth_init to avoid execution issue (the interface_type parameter is defined as int or phy_interface_t). To have a generic weak function (it should be reused by other driver) I change the prototype to use directly udevice. This prototype is added in netdev.h to allow compilation check and avoid warning when compiling with W=1 on file board/st/stm32mp1/stm32mp1.c warning: no previous prototype for 'board_interface_eth_init'\ [-Wmissing-prototypes] int board_interface_eth_init(int interface_type, .... ^~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-03Merge tag 'arc-for-2019.10-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc These are some very late changes mostly required to get 64-bit division working on ARC boards. For that we had to import missing parts of libgcc and add compiler flags to EMSDP which otherwise used very simple profile for compliation. And while at it another fix for EM SDP initialization is inluded as well.
2019-09-03arc: emsdp: Add more platform-specific compiler optionsAlexey Brodkin
Even though EM SDP is FPGA-based board and different FPGA images (known as .bit-files) are awailable for the board still there's a common subset of options we may rely on for all configs. These are: * Normalizer * Swap instructions * Simple multiplier * Barrel-shifter * Floating-point unit * Shorter instructions (code density) This among other improvements allows to compile code with 64-bit divisions, see [1]. [1] https://patchwork.ozlabs.org/patch/1156541/ Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Kever Yang <kever.yang@rock-chips.com>
2019-09-03arc: emsdp: Add initialization of PSRAMAlexey Brodkin
If the "Page Mode" is not enabled on the device, read operations from PSRAM may result in incorrect data. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-09-03riscv: ae350: use the v5l2 driver to configure the cacheRick Chen
Find the UCLASS_CACHE driver to configure the cache controller's settings. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-03riscv: sifive: fu540: set serial environment variable from otpSagar Shrikant Kadam
This patch sets the serial# environment variable by reading the board serial number from the OTP memory region. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-02sh: r2dplus: Switch to DM PCI driverMarek Vasut
Add DT entry for the DM PCI driver, update board configs and drop ad-hoc board init code for the PCI bus. Instead, let the DM PCI driver initialize and operate the hardware. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-31Revert "vexpress64: fvp dram: add DRAM configuration"Ryan Harkin
This reverts commit fc04b923541d984b1544056fd3bfa8129d4e5aac where the FVP DRAM configuration was added. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2019-08-30siemens: avoid out of bound accessHeinrich Schuchardt
char num[1]; sprintf(num, "%d", i); leads to a buffer overrun. Simplify the overly complex coding. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-08-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
Enable DM PCI for T2080RDB, T4240RDB, T1024RDB, T1042D4RDB, P1020RDB, P2020RDB, P2041RDB, P3041DS, P4080DS, and MPC8548CDS
2019-08-28powerpc: MPC85xxCDS: Disable legacy PCI fixup when DM_PCI is selectedHou Zhiqiang
Disable legacy PCI and PCIe fixup when CONFIG_DM_PCI is selected. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: MPC8548CDS: Compile legacy PCIe routines conditionallyHou Zhiqiang
Compile the legacy PCIe initialization routines only when DM_PCI is not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: p_corenet: Compile legacy PCIe routines conditionallyHou Zhiqiang
Compile the legacy PCIe initialization routines for P2041RDB, P3041, P4080, P5020 and P5040 DS boards only when DM_PCI is not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: p1_p2_rdb: Compile legacy PCIe routines conditionallyHou Zhiqiang
Compile the legacy PCIe initialization routines for P1020, P1021, P1024, P1025 and P2020 RDB boards only when DM_PCI is not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: T104xRDB: Compile legacy PCIe routines conditionallyHou Zhiqiang
Compile the legacy PCIe initialization routines only when DM_PCI is not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: T102xRDB: Compile legacy PCIe routines conditionallyHou Zhiqiang
Compile the legacy PCIe initialization routines only when DM_PCI is not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: T4RDB: Compile legacy PCIe routines conditionallyHou Zhiqiang
Compile the legacy PCIe initialization routines only when DM_PCI is not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: T208xRDB: Compile legacy PCIe routines conditionallyHou Zhiqiang
Compile the legacy PCIe initialization routines only when DM_PCI is not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-27Merge branch 'u-boot-stm32_20190827' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Fixes and update related to STM32MP1 platforms
2019-08-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
Support of device tree model for T2080RDB, T4240RDB, T1024RDB, T1042D4RDB, P1020RDB, P2020RDB, P2041RDB, P3041DS, P4080DS, P5040DS and MPC8548CDS. Also support of i2c dm model.
2019-08-27stm32mp1: update README for remoteproc supportPatrick Delaunay
Add information for remoteproc usage to load firmware in M4 coprocessor on stm32mp157. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: add example files for FIT generationPatrick Delaunay
Add example of its files to generate FIT to start kernel on ev1 or dk2 board with - only kernel and dtb = fit_copro_kernel_dtb.its - kernel, M4 copro firmware and dtb = it_copro_kernel_dtb.its Add extlinux example to manage config in generated FIT. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: Add copro image support for M4 firmwarePatrick Delaunay
Implements copro image loading with FIT. Once image is loaded with remoteproc, the M4 coprocessor is automatically started. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board update command stboard on misc_read resultPatrick Delaunay
Update management of misc_read, which now return length of data after the commit 8729b1ae2cbd ("misc: Update read() and write() methods to return bytes xfered") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: update sysconf_init on misc_read resultPatrick Delaunay
Update management of misc_read in sysconf_init, which now return length of data after the commit 8729b1ae2cbd ("misc: Update read() and write() methods to return bytes xfered") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: update test on misc_read resultPatrick Delaunay
Update the stm32mp1 baord after the commit 8729b1ae2cbd ("misc: Update read() and write() methods to return bytes xfered") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARDPatrick Delaunay
Add the missing driver and files for mach-stm32mp / stm32mp1 product. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: cosmetic: cleanup filePatrick Delaunay
- reorder include files - remove one comment Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: remove board_check_usb_power when ADC is not activatedPatrick Delaunay
Avoid compilation issue when CONFIG_ADC is not activated Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: Update the way vdd-supply is retrieved from DTPatrick Delaunay
Due to kernel DT alignment, pwr-supply is renamed to vdd-supply and is a subnode of pwr-regulators. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: check the boot-source to disable bootdelayPatrick Delaunay
Allows to avoid to wait 2 second in U-Boot before to start STM32CubeProgrammer command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: protect the led function callsPatrick Delaunay
Avoid compilation issue when CONFIG_LED is not activated Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: support of error led on ed1/ev1 boardPatrick Delaunay
Create a function led_error_blink and add node in device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 bootPatrick Delaunay
As for Audio codec IC, HDMI IC is not "IO safe". HDMI regulators (v3v3 and v1v2) must be enabled to allow I2C1 bus usage. HDMI IC must be under reset during power up and keep HDMI and AUDIO devices in reset while they are not used in U-Boot to keep them in low power mode (each device can be kept in reset independently keeping their power supplies ON until kernel). Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2024-12-27 04:35:02 +0000