summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2006-10-18Coding Style cleanup.Wolfgang Denk
2006-10-18Merge with /home/tur/proj/051_uboot_linux_v38b/u-bootWolfgang Denk
2006-10-13Preliminary patch adding support for the MarelV38B board.Bartlomiej Sieka
2006-10-09TQM5200: perform POST memory test only on STK52xx carrier board.Wolfgang Denk
(and then only if PSC6_3 is read as "1" when booting). Patch by Martin Krause, 21 Jun 2006
2006-10-09Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09Add missing files for EP82xxM boardsWolfgang Denk
Patch by Aaron Sells, 20 Jun 2006
2006-10-09Coding style cleanupWolfgang Denk
2006-10-05Merge with /home/m8/git/u-bootWolfgang Denk
2006-10-04Fix TLB setup for Ocotea boardStefan Roese
Patch by Stefan Roese, 30 Sep 2006
2006-10-04Fix reset problem in sequoia sdram init codeStefan Roese
Patch by Stefan Roese, 23 Sep 2006
2006-10-03Update for CAM5200 board:Marian Balakowicz
- Map in a additional chip selects CS4 and CS5. - Modify the port configration, configure six UARTs and no PCI, ATA and USB. - Add custom flash driver to handle specific byte swapping
2006-09-13Add support for AMCC Rainier PPX440GRx eval boardStefan Roese
Patch by Stefan Roese, 13 Sep 2006
2006-09-13Disable autoboot abort for FO300 when silent mode is enabledWolfgang Denk
(according to S1 switch setting). Patch by Marian Balakowicz, 12 Sep 2006
2006-09-12Add NAND environment support for PPC440EPx Sequoia NAND boot configStefan Roese
Patch by Stefan Roese, 12 Sep 2006
2006-09-07Add support for AMCC Sequoia PPC440EPx eval boardStefan Roese
- Add support for PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller in cpu/ppc4xx directory - Add NAND boot functionality for Sequoia board, please see doc/README.nand-boot-ppc440 for details - This Sequoia NAND image doesn't support environment in NAND for now. This will be added in a short while. Patch by Stefan Roese, 07 Sep 2006
2006-09-04Fix build problems on sorcery board.Wolfgang Denk
2006-09-04Merge with /home/m8/git/u-bootWolfgang Denk
2006-09-01Add support for a saving build objects in a separate directory.Marian Balakowicz
Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
2006-09-01Remove the board/netstar/crcit binary from git repository.Marian Balakowicz
2006-08-30Add splashscreen support for MCC200 board.Wolfgang Denk
2006-08-29PCIe endpoint support for AMCC Yucca 440SPe boardStefan Roese
Patch by Tirumala R Marri, 26 Aug 2006
2006-08-29Improve DIMM detection for AMCC Yucca 440SPe boardStefan Roese
Improved the memory DIMM detection for the Yucca 440SPe board for the case where a memory DIMM is falsely detected as present. This issue is seen on some AMCC Yucca 440SPe validation boards if only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is populated and DIMM slot 1 is empty. In this case, U-Boot does not correctly detect that there is only one DIMM memory module installed and will falsely detect two DIMM memory modules are present and therefore U-Boot will not calculate the correct amount of total memory and u-boot will not booting up. Patch by Adam Graham, 24 Aug 2006
2006-08-27Code cleanupWolfgang Denk
2006-08-24Updates for MCC200 / PRS200 boards:Wolfgang Denk
- support for configurations with SDRAM or DDR memory, - support for highboot and lowboot - adjusting environment definitions
2006-08-18Minor cleanupWolfgang Denk
2006-08-18Add support for WTK FO300 board (TQM5200 based).Marian Balakowicz
2006-08-17MCC200: restrict addressable flash space to 32 MBWolfgang Denk
2006-08-13Merge with /home/sr/git/u-boot/denxWolfgang Denk
2006-08-11Merge with /home/raj/git/u-bootWolfgang Denk
2006-08-11Fix PCI-Express on PPC440SPe rev. A.Rafal Jaworowski
2006-08-10Merge with /home/raj/git/u-bootWolfgang Denk
2006-08-10Add support for PCI-Express on PPC440SPe (Yucca board).Rafal Jaworowski
2006-08-10Fix compiler warning for TRAB board.Wolfgang Denk
Patch by Martin Krause, 07 Aug 2006
2006-08-07Add Macronix MXLV320T flash support for AMCC BambooStefan Roese
Patch by Stefan Roese, 07 Aug 2006
2006-07-28PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performanceStefan Roese
AMCC suggested to set the PMU bit to 0 for best performace on the PPC440 DDR controller. Please see doc/README.440-DDR-performance for details. Patch by Stefan Roese, 28 Jul 2006
2006-07-27AMCC bamboo (440EP) U-Boot image reduced to 384kbyteStefan Roese
Please see doc/README.bamboo for details. Patch by Stefan Roese, 27 Jul 2006
2006-07-23MCC200: set default configuration to low_boot DDR,Wolfgang Denk
and support for configurable options high_boot and/or SDRAM.
2006-07-22Add support for 256 MB SDRAM on CPU87Wolfgang Denk
Patch by Josef Wagner, 25 Nov 2005
2006-07-22Add configuration for cam5200 board (based on TQM5200S).Wolfgang Denk
2006-07-21Code cleanupWolfgang Denk
2006-07-21Code cleanup.Wolfgang Denk
2006-07-21More code cleanupWolfgang Denk
2006-07-21Code cleanupWolfgang Denk
2006-07-21Update NetStar boardWolfgang Denk
Patch by Ladislav Michl, 03 Nov 2005
2006-07-21Add support for friendly-arm SBC-2410X boardWolfgang Denk
Patch by JinHua Luo, 01 Sep 2005
2006-07-21Add support for KVME080 boardWolfgang Denk
Patch by Sangmoon Kim, 18 Aug 2005
2006-07-21* Cleanup TQM5200 board configurations:Wolfgang Denk
- make highboot configurations use environment at high end, too, to avoid flash fragmentation - always use redundand environment - don't enable video code for modules without graphics controller - provide useful (though different) mtdparts settings - get rid of CONFIG_CS_AUTOCONF which was always set anyway * Extend mkconfig tool to print more useful target name
2006-07-19Add support for high-boot on TQM5200 and TQM5200S boards.Wolfgang Denk
Hint: the CPLD on the TQM5200 must be programmed with a software version supporting the high boot option! The new TQM5200S is already supporting this option. On the TQM5200 this option will be supported in configurations with MPC5200 rev B processors. To actually "high boot", set jumper X30 on the STK52xx. Patch by Martin Krause, 12 Jul 2006
2006-07-19Add support for new TQM5200 revisionsWolfgang Denk
- Support for TQM5200S (short version without graphic controller) - Support for modules with 'N' type S29GL128N Spansion flashes (requires changes to flash layout) - Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-19Fix support for PS/2 keyboard on TQM85xx boardsWolfgang Denk
The PS/2 keyobard driver for the TQM85xx modules only supports the internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't include a DUART, the TQM8560 modules can't be used with the PS/2 keyboard controller on the STK85xx board. The PS/2 keyboard driver should work with the modules TQM8540, TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet. Make sure the PS/2 controller on the STK85xx is programmed. Jumper settings: X66 1-2, 9-10; X61 2-3 Patch by Martin Krause, 21 Jun 2006
generated by cgit (git 2.34.1) at 2025-02-02 01:51:49 +0000