summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2019-10-08imx: Convert emergency pad of display5 to use dm_gpio* functionsLukasz Majewski
After this change the display5's emergency gpio use dm_gpio* functions instead of legacy ones (gpio*) to read its state. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08ARM: display5: Remove common.c file (after DM/DTS U-Boot proper conversion)Lukasz Majewski
The common.c file content can be safely moved to spl.c file after performing the DM/DTS conversion for the U-Boot proper. It contains the non DM/DTS setup code, which now is only used by SPL. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08ARM: display5: Remove UART initialization code after DM/DTS conversion ↵Lukasz Majewski
(non-console) This UART is not used in U-Boot, so there is no need to initialize it. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: SPI: Convert display5 to use SPI with DM/DTS (but no in SPL)Lukasz Majewski
The DM/DTS support for SPI is disabled on purpose for SPL, as it is not supported as of time of this conversion. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: eth: Switch display5 board to use DM_ETHLukasz Majewski
After this commit the display5 device would use FEC driver supporting driver model (DM_ETH). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: mmc: Switch display5 board to use DM_MMC and BLK (USDHC)Lukasz Majewski
After this commit the display5 device would use eMMC driver supporting driver model (DM_MMC and BLK). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: I2C: Switch display5 board to use DM_I2CLukasz Majewski
After this commit the display5 device would use I2C driver supporting driver model (DM_I2C). The 'i2c' and 'eeprom' commands now use DM I2C drivers and initialize on-bus devices according to device tree description. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08imx: bk4: Print proper HW revision of VF610's BK4 boardLukasz Majewski
This code uses HW difference on the USB_RESET pin (added PULL UP resistor on the L333 rev) to distinguish between two BK4 HW revisions. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08pico-imx6: Add Falcon modeFabio Estevam
Add Falcon mode support, which allows the SPL to load and jump to the Linux kernel directly, without the need of loading U-Boot proper. CONFIG_SPL_OS_BOOT=y needs to be passed in the defconfig in order to use Falcon mode. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08pico-imx6: Add splashscreen supportFabio Estevam
Add splashscreen support. Tested with the parallel FT5x06-WVGA panel. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08pico-imx6: Add Ethernet supportFabio Estevam
Add Ethernet support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08pico-imx6: Add initial supportFabio Estevam
Add the initial support for the pico-imx6 variants. DDR initialization is based on the TechNexion's U-Boot code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08configs: pico-imx7d: Convert to DM_VIDEOJoris Offouga
This commit convert all pico-imx7d to DM_VIDEO Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08imx: fix missing MAINTAINERS pico boardsStefano Babic
Add missing files pico-nymph-imx7d_defconfig and c>onfigs/pico-dwarf-imx7d_defconfig Signed-off-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> CC: Fabio Estevam <festevam@gmail.com> CC: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08pico-imx7d: Provide a way to escape the Falcon modeFabio Estevam
When CONFIG_SPL_OS_BOOT is selected, it is still convenient to be able to escape from Falcon mode and boot to U-Boot proper. Add a mechanism that allows booting in U-Boot proper when the key 'c' is entered on console at boot time. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08pico-imx7d: Add instructions for booting in Falcon modeFabio Estevam
Improve the README by adding instructions on how to boot using Falcon mode, which allows the SPL to load the kernel directly, without using U-Boot proper. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08pico-imx6ul: Provide a way to escape the Falcon modeFabio Estevam
When CONFIG_SPL_OS_BOOT is selected, it is still convenient to be able to escape from Falcon mode and boot to U-Boot proper. Add a mechanism that allows booting in U-Boot proper when the key 'c' is entered on console at boot time. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08pico-imx6ul: Update the Falcon mode instructionsFabio Estevam
Sync the Falcon mode instructions with the ones fro pico-imx7d. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08pico-imx6ul: Add LCD supportFabio Estevam
Add support for the VXT VL050-8048NT-C01 panel connected through the 24 bit parallel LCDIF interface. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08imx8qm_mek: switch to use container imagePeng Fan
Because FIT could not be used for AHAB secure boot on i.MX8, so switch to use container image that could let SPL verify ATF and U-Boot with AHAB. Enable HUSH_PARSER in defconfig to make run netboot could work. Note: The AHAB related code has not been added. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8qxp_mek: switch to use container imagePeng Fan
Because FIT could not be used for AHAB secure boot on i.MX8, so switch to use container image that could let SPL verify ATF and U-Boot with AHAB. Note: The AHAB related code has not been added. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: imx8qxp_mek: fix CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTORPeng Fan
The first stage of flash.bin is larger than 584 * 512, so when writting u-boot.itb, some data will be override. Enlarge the CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to fix boot. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08i.MX7ULP: evk: Modify FDT file to disable SD3.0 for usb bootPeng Fan
Since the SD3.0 kernel driver needs M4 image support, this causes problem for usb boot booting into kernel. To decouple the relationship, we modify the FDT file in u-boot to disable SD3.0. So the kernel won't depend on M4 image. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08nitrogen6x: reserve used gpiosTroy Kisky
This prevents messages like gpio@20a0000: get_value: error: gpio GPIO2_2 not reserved when CONFIG_DM_GPIO is enabled. Also, when CONFIG_DM_GPIO is enabled, checkboard is too early to use gpio_get_value, so read it directly on failure. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-10-08nitrogen6x: migrate to using device treeTroy Kisky
Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-10-08apalis_imx6: fix broken fsl_esdhc_imx conversionRicardo Salveti
Commit e37ac717d796 ("Convert to use fsl_esdhc_imx for i.MX platforms") converted FSL_ESDHC to FSL_ESDHC_IMX, but the config check for apalis_imx6 wasn't updated accordantly. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-10-08apalis_imx6: add board_fit_config_name_match to support FIT in SPLRicardo Salveti
Only one dtb is currently supported, so match with imx6-apalis. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-10-08imx: mx6slevk: enable DM_SPI and DM_SPI_FLASHPeng Fan
With DM_SPI and DM_SPI_FLASH enabled, we could get: spi 0 [ ] mxc_spi | | | `-- ecspi@02008000 spi_flash 0 [ ] spi_flash_std | | | `-- m25p80@0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: mx6ul_14x14_evk: convert to DM_VIDEOPeng Fan
To support DM_VIDEO, Add display node for lcdif Drop board iomuxc settings. Enable DM_VIDEO Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08imx: mx6ul_14x14_evk: Fix SPL bootPeng Fan
When booting SPL on the board, met boot failure: " Trying to boot from MMC2 MMC Device 1 not found spl: could not find mmc device 1. error: -19 SPL: failed to boot from all boot devices " Let's register the two mmc controllers in SPL stage to avoid boot failure. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08imx: add i.MX6ULZ boardPeng Fan
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible with i.MX6ULL. so most code of i.MX6ULL can be reused by i.MX6ULZ. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-06MAINTAINERS: Update my email addressMaxime Ripard
I'm not at bootlin anymore, and my mail address doesn't work any longer. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-04ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPLAdam Ford
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-10-04board: ti: am654: Disable TRNG node for HS devicesAndrew F. Davis
On HS devices the access to TRNG is restricted on the non-secure ARM side, disable the node in DT to prevent firewall violations. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-01rpi4: enable dram bank initializationMatthias Brugger
When booting through the efi stub, the memory map get's created by reading the dram bank information. Depending on the version of the RPi4 this information changes. Read the device tree to initialize the dram bank data structure. This way the kernel is able to access the whole range of available memory. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add emmc hs200 support - Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-13MAINTAINERS: Change fsl-qoriq, mpc86xx, mpc85xx maintainersPriyanka Jain
Change maintainers to Priyanka Jain for fsl-qoriq, mpc85xx Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-09-12lx2160: Correct serdes frequency print.Meenakshi Aggarwal
Suffix serdes frequency print with MHz Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12board: lx2160aqds: add support for SerDes protocol 14Florin Chiculita
Add SerDes1 protocol 14 in the list of supported protocols. This configuration enables one high-speed 100G port and PCIe x4. Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12board: lx2160aqds: fix ethernet-phy compatible propertyFlorin Chiculita
The code that generates the compatible property concatenates the ethernet phy id and clause-compatible information without separating them with a comma, resulting into no ethernet phy driver getting loaded by Linux kernel. Suffix phy_id_compatible_str with comma to fix this Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12board: fsl: lx2160a: implement board_fix_fdtPankaj Bansal
lx2160a rev1 and rev2 SoC has different pcie controller. The pcie controller device tree node fields "compatible" and registers names needs to be updated accordingly This change in device tree is handled as part of fdt fixups. These changes would only be applied if the soc revision is not rev1. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-11doc: lion_rk3368: use idbloader.img for rk3368Matwey V. Kornilov
Makefile now produces ready-to-deploy idbloader.img file. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-07Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Initial DM conversion
2019-09-06Merge tag 'rpi-next-2019.10' of https://github.com/mbgg/u-bootTom Rini
- fix mailbox status register used for polling - fix bcm2835_sdhost to wait long enough for a transfer to complete - increase kernel image size from 8 MB to 64 MB on arm64 - add support for RPi4 - add prefixes for raspberry pi related stuff to git-mailrc
2019-09-06RPI: Add memory map for bcm2711Andrei Gherzan
Define the memory map for the BCM2711 based on the dt configuration available in the Raspberry Pi kernel fork. Signed-off-by: Andrei Gherzan <andrei@balena.io> [mb: BCM2838 -> BCM2711] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06RPI: Add entry for Raspberry Pi 4 model BAndrei Gherzan
The Raspebrry Pi 4 uses the new revision code scheme as documented by the foundation. This change adds an entry for this board as well. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-04net: dwc_et_qos: update weak function board_interface_eth_initPatrick Delaunay
Align the board and driver prototype for board_interface_eth_init to avoid execution issue (the interface_type parameter is defined as int or phy_interface_t). To have a generic weak function (it should be reused by other driver) I change the prototype to use directly udevice. This prototype is added in netdev.h to allow compilation check and avoid warning when compiling with W=1 on file board/st/stm32mp1/stm32mp1.c warning: no previous prototype for 'board_interface_eth_init'\ [-Wmissing-prototypes] int board_interface_eth_init(int interface_type, .... ^~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-03Merge tag 'arc-for-2019.10-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc These are some very late changes mostly required to get 64-bit division working on ARC boards. For that we had to import missing parts of libgcc and add compiler flags to EMSDP which otherwise used very simple profile for compliation. And while at it another fix for EM SDP initialization is inluded as well.
2019-09-03arc: emsdp: Add more platform-specific compiler optionsAlexey Brodkin
Even though EM SDP is FPGA-based board and different FPGA images (known as .bit-files) are awailable for the board still there's a common subset of options we may rely on for all configs. These are: * Normalizer * Swap instructions * Simple multiplier * Barrel-shifter * Floating-point unit * Shorter instructions (code density) This among other improvements allows to compile code with 64-bit divisions, see [1]. [1] https://patchwork.ozlabs.org/patch/1156541/ Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Kever Yang <kever.yang@rock-chips.com>
2019-09-03arc: emsdp: Add initialization of PSRAMAlexey Brodkin
If the "Page Mode" is not enabled on the device, read operations from PSRAM may result in incorrect data. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
generated by cgit (git 2.34.1) at 2024-12-26 19:50:07 +0000