summaryrefslogtreecommitdiff
path: root/cmd/Kconfig
AgeCommit message (Collapse)Author
2019-10-31cmd: thor: select DFU subsystem also for 'thor' download toolMarek Szyprowski
'THOR' download command requires DFU infrastructure to properly flash board images. It can be used without enabling DFU command, so add such dependency to Kconfig. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-10-25cmd: sf: Mark it default if DM_SPI_FLASH enabledJagan Teki
If DM_SPI_FLASH enabled that means it is using sf command for flash interface to access. SPI_FLASH can be used via sf command and board/driver functions to call spi flash ops, so mark it default only for DM_SPI_FLASH. This would prevent explicit adding of CONFIG_CMD_SF when DM_SPI_FLASH being enabled. Cc: Tom Rini <trini@konsulko.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-23cmd: Add Support for UFS commandsFaiz Abbas
Add Support for commands to initialize and configure UFS devices. TODO: Add Support for commands to resize and reconfigure LUNs Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-09Merge tag 'xilinx-for-v2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 FPGA: - Enable fpga loading on Versal - Minor fix Microblaze: - Fix LMB configurations to support initrds - Some other cleanups Zynq: - Minor config/dt changes - Add distro boot support for usb1 and mmc1 - Remove Xilinx private boot commands and use only distro boot ZynqMP: - Kconfig cleanups, defconfig updates - Update some dt files - Add firmware driver for talking to PMUFW - Extend distro boot support for jtag - Add new IDs - Add system controller configurations - Convert code to talk firmware via mailbox or SMCs Versal: - Add board_late_init() - Add run time DT memory setup - Add DFU support - Extend distro boot support for jtag and dfu - Add clock driver - Tune mini configurations Xilinx: - Improve documentation (boot scripts, dt binding) - Enable run time initrd_high calculation - Define default SYS_PROMPT - Add zynq/zynqmp virtual defconfig Drivers: - Add Xilinx mailbox driver for talking to firmware - Clean zynq_gem for Versal - Move ZYNQ_HISPD_BROKEN to Kconfig - Wire genphy_init() in phy.c - Add Xilinx gii2rgmii bridge - Cleanup zynq_sdhci - dwc3 fix - zynq_gpio fix - axi_emac fix Others: - apalis-tk1 - clean config file
2019-10-08arm64: zynqmp: Define default SYS_PROMPTMichal Simek
All boards are using the same prompt that's why add it as default value to Kconfig to simplify defconfigs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-08ARM: zynq: Define default SYS_PROMPTMichal Simek
All boards are using the same prompt that's why add it as default value to Kconfig to simplify defconfigs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-06cmd: disable CMD_NVEDIT_EFI by defaultHeinrich Schuchardt
The growth of the UEFI sub-system leads to build failures for systems with strict limits on the U-Boot image size. CMD_NVEDIT_EFI supports displaying and editing of UEFI variables. The setting is not needed for booting. Disabling it by default reduces the size of the U-Boot image by 2 KiB. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-04Kconfig: fix a typo in the description of bmp command.Andrius Štikonas
Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
2019-10-04Kconfig: Migrate CONFIG_BOOTM_* optionsTom Rini
Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04autoboot: add necessary dependency at AUTOBOOT_MENU_SHOWAKASHI Takahiro
Otherwise, menu_show() will be undefined in bootdelay_process(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-09-04net: introduce packet capture supportRamon Fried
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark) This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Tested-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-23Convert CONFIG_MX_CYCLIC to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_MX_CYCLIC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: David Lechner <david@lechnology.com>
2019-08-11Drop PCMCIASimon Glass
This is no-longer used in U-Boot and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02Convert CONFIG_AUTOBOOT_MENU_SHOW to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_AUTOBOOT_MENU_SHOW Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEYSimon Glass
Since this is part of the autoboot functionality, it makes sense to name it with an AUTOBOOT prefix. No mainline boards use it so this should be safe, and downstream boards will need to adjust. Since this option is just an integer value, it really needs another option to control whether the feature is enabled or not. Add a new CONFIG_USE_AUTOBOOT_MENUKEY for that. This fits better with how things are done with Kconfig, avoiding the need to use a specific value to disable the feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02autoboot: Improve docs for CONFIG_AUTOBOOT_ENCRYPTIONSimon Glass
This option is not documented properly at present. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-27Merge tag 'u-boot-imx-20190719' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-24cmd: Add 'ab_select' commandRuslan Trofymenko
For A/B system update support the Android boot process requires to send 'androidboot.slot_suffix' parameter as a command line argument. This patch implementes 'ab_select' command which allows us to obtain current slot by processing the A/B metadata. The patch was extracted from commit [1] with one modification: the separator for specifying the name of metadata partition was changed from ';' to '#', because ';' is used for commands separation. [1] https://android-review.googlesource.com/c/platform/external/u-boot/+/729880/2 Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Alistair Strachan <astrachan@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-24treewide: Fix stale references of Android docsEugeniu Rosca
Commit 9bdf0e8fef86 ("doc: relocate/rename Android README and add BCB overview") left some obsolete references of Android documents/paths. This has been pointed out by Sam (thanks!) in: https://patchwork.ozlabs.org/patch/1104245/#2208134 Fixes: 9bdf0e8fef86 ("doc: relocate/rename Android README and add BCB overview") Reported-by: Sam Protsenko <semen.protsenko@linaro.org> Suggested-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-19Kconfig: Add CMD_SPL_NOR_OFS config for falcon boot argument offsetLukasz Majewski
This option will provide the offset in the parallel NOR flash memory to, which the falcon boot data is stored. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19Kconfig: cosmetic: Update description of CMD_SPL_NAND_OFSLukasz Majewski
The CMD_SPL_NAND_OFS description was a bit misleading, has been updated. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19Kconfig: Make CMD_SPL_NAND_OFS only available when proper memory is usedLukasz Majewski
This commit makes the CMD_SPL_NAND_OFS only visible when we use NAND memory. Before this change it was present when only CMD_SPL was enabled (and would stay when board with other falcon boot medium is used). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-18cmd: mem: Add a command to fill the memory with random dataJean-Jacques Hiblot
This command fills the memory with data produced by rand(). Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-18env: register erase commandFrank Wunderlich
this patch adds basic changes for adding a erase-subcommand to env with this command the environment stored on non-volatile storage written by saveenv can be cleared. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> squashed fixes - start message with "Erasing" - mark erase-function as optional - env: separate eraseenv from saveenv Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-15cmd: Remove mmc_spi commandAnup Patel
The mmc_spi command was added to manually setup MMC over SPI bus using command. This was required by the legacy non-DM MMC_SPI driver. With DM based MMC_SPI driver in-place, we can now use all general storge commands and mmc command for MMC over SPI bus hence we remove the mmc_spi command all it's references. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-13cmd: nvedit: Add sub-command 'env info'Leo Ruan
Add sub-command 'env info' to display environment information: - env_valid : is environment valid - env_ready : is environment imported into hash table - env_use_default : is default environment using This command can be optionally used for evaluation in scripts: [-d] : evaluate whether default environment is used [-p] : evaluate whether environment can be persisted The result of multiple evaluations will be combined with AND. Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Do not enable by default] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-11cmd: Add 'bcb' command to read/modify/write BCB fieldsEugeniu Rosca
'Bootloader Control Block' (BCB) is a well established term/acronym in the Android namespace which refers to a location in a dedicated raw (i.e. FS-unaware) flash (e.g. eMMC) partition, usually called "misc", which is used as media for exchanging messages between Android userspace (particularly recovery [1]) and an Android-capable bootloader. On higher level, this allows implementing a subset of Android Bootloader Requirements [2], amongst which is the Android-specific bootloader flow [3]. Regardless how the latter is implemented in U-Boot ([3] being the most memorable example), reading/writing/dumping the BCB fields in the development process from inside the U-Boot is a convenient feature. Hence, make it available to the users. Some usage examples of the new command recorded on R-Car H3ULCB-KF ('>>>' is an overlay on top of the original console output): => bcb bcb - Load/set/clear/test/dump/store Android BCB fields Usage: bcb load <dev> <part> - load BCB from mmc <dev>:<part> bcb set <field> <val> - set BCB <field> to <val> bcb clear [<field>] - clear BCB <field> or all fields bcb test <field> <op> <val> - test BCB <field> against <val> bcb dump <field> - dump BCB <field> bcb store - store BCB back to mmc Legend: <dev> - MMC device index containing the BCB partition <part> - MMC partition index or name containing the BCB <field> - one of {command,status,recovery,stage,reserved} <op> - the binary operator used in 'bcb test': '=' returns true if <val> matches the string stored in <field> '~' returns true if <val> matches a subset of <field>'s string <val> - string/text provided as input to bcb {set,test} NOTE: any ':' character in <val> will be replaced by line feed during 'bcb set' and used as separator by upper layers => bcb dump command Error: Please, load BCB first! >>> Users must specify mmc device and partition before any other call => bcb load 1 misc => bcb load 1 1 >>> The two calls are equivalent (assuming "misc" has index 1) => bcb dump command 00000000: 62 6f 6f 74 6f 6e 63 65 2d 73 68 65 6c 6c 00 72 bootonce-shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The output is in binary/string format for convenience >>> The output size matches the size of inspected BCB field >>> (32 bytes in case of 'command') => bcb test command = bootonce-shell && echo true true => bcb test command = bootonce-shell- && echo true => bcb test command = bootonce-shel && echo true >>> The '=' operator returns 'true' on perfect match => bcb test command ~ bootonce-shel && echo true true => bcb test command ~ bootonce-shell && echo true true >>> The '~' operator returns 'true' on substring match => bcb set command recovery => bcb dump command 00000000: 72 65 63 6f 76 65 72 79 00 73 68 65 6c 6c 00 72 recovery.shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The new value is NULL-terminated and stored in the BCB field => bcb set recovery "msg1:msg2:msg3" => bcb dump recovery 00000040: 6d 73 67 31 0a 6d 73 67 32 0a 6d 73 67 33 00 00 msg1.msg2.msg3.. 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ >>> --- snip --- >>> Every ':' is replaced by line-feed '\n' (0xA). The latter is used >>> as separator between individual commands by Android userspace => bcb store >>> Flush/store the BCB structure to MMC [1] https://android.googlesource.com/platform/bootable/recovery [2] https://source.android.com/devices/bootloader [3] https://patchwork.ozlabs.org/patch/746835/ ("[U-Boot,5/6] Initial support for the Android Bootloader flow") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-06-13Kconfig: Add SPI / SPI_FLASH as dependenciesTom Rini
In order to use CMD_SF / CMD_SPI / ENV_IS_IN_SPI_FLASH we need to have the SPI (or SPI_FLASH/DM_SPI_FLASH, for CMD_SF) enabled. Express this in the Kconfigs. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-28cmd: remove unused `display` commandHeinrich Schuchardt
Compiling the display command leads to an error undefined reference to `display_set' No implementation of display_set() exists in U-Boot. Eliminate the `display` command as well as the accompanying files. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-12efi_loader: make device path to text protocol customizableHeinrich Schuchardt
The device path to text protocol is not needed for EBBR compliance. So let's make it a customizable option. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-10cmd: ubifs: Remove select for non-existent optionChris Packham
There is no 'config CRC32', remove the select that was attempting to use it. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-05-09RISCV: image: Add booti supportAtish Patra
This patch adds booti support for RISC-V Linux kernel. The existing bootm method will also continue to work as it is. It depends on the following kernel patch which adds the header to the flat Image. Gzip compressed Image (Image.gz) support is not enabled with this patch. https://patchwork.kernel.org/patch/10925543/ Tested on HiFive Unleashed and QEMU. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Karsten Merker <merker@debian.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2019-04-26Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2019-04-25Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without ↵Simon Goldschmidt
DM_I2C_COMPAT" This reverts commit 65a97e7fcf54feb7c4ebe1aee8a572830af4cf51. The 'eeprom' command has been converted to work with DM_I2C in a patch submitted around the same time as this commit: commit 0c07a9b4078d ("eeprom: Add device model based I2C support to eeprom command") Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-24Merge tag 'pull-24apr19' of git://git.denx.de/u-boot-dmTom Rini
Various minor sandbox iumprovements Fixes for tracing with sandbox Refactoring for boot_get_fdt()
2019-04-23Convert CONFIG_TRACE to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_TRACE Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23common: command: Add command execution tracer.Christoph Muellner
When using boot scripts it can become quite hard to understand which commands are actually executed during bootup (e.g. where is a kernel image loaded from or which DTB is in use). Shell scripts suffer from a similar problem and many shells address this problem with a command execution tracer (e.g. BASH has xtrace, which can be enabled by "set -x"). This patch introduces a command tracer for U-Boot, which prints every command with its arguments before it is executed. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-22cmd: add exception commandHeinrich Schuchardt
The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12cmd: add wdt commandMichael Walle
Add a command to control the watchdog devices. This is useful if the watchdog is rather long running (eg. seconds) and it should be controlled by scripts. It is also handy during debugging. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-25Convert CONFIG_DEFAULT_SPI_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_DEFAULT_SPI_BUS CONFIG_DEFAULT_SPI_MODE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-25cmd: add efidebug commandAKASHI Takahiro
Currently, there is no easy way to add or modify UEFI variables. In particular, bootmgr supports BootOrder/BootXXXX variables, it is quite hard to define them as u-boot variables because they are represented in a complicated and encoded format. The new command, efidebug, helps address these issues and give us more friendly interfaces: * efidebug boot add: add BootXXXX variable * efidebug boot rm: remove BootXXXX variable * efidebug boot dump: display all BootXXXX variables * efidebug boot next: set BootNext variable * efidebug boot order: set/display a boot order (BootOrder) Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25cmd: env: add "-e" option for handling UEFI variablesAKASHI Takahiro
"env [print|set] -e" allows for handling uefi variables without knowing details about mapping to corresponding u-boot variables. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-22cmd: Kconfig: LED command depends on LED subsystemsJan Kiszka
Without CONFIG_LED, we get cmd/built-in.o: In function `show_led_state': cmd/led.c:40: undefined reference to `led_get_state' cmd/built-in.o: In function `do_led': cmd/led.c:99: undefined reference to `led_get_by_label' cmd/led.c:108: undefined reference to `led_set_state' Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2019-02-13efi_loader: CMD_BOOTEFI_HELLO_COMPILE in configsHeinrich Schuchardt
It should not be necessary to adjust CMD_BOOTEFI_HELLO_COMPILE in config files. arch/arm/lib/crt0_arm_efi.S cannot be compiled in thumbs mode. We can disable CMD_BOOTEFI_HELLO_COMPILE for CONFIG_CPU_V7M. So there is no longer a need to disable it in stm32 configs. helloworld.efi can be built without problems on x86_64. So there is no need to disable it in chromebook_link64_defconfig and qemu-x86_64_defconfig. Same is true for ARM V7A. So do not disable CMD_BOOTEFI_HELLO_COMPILE in kp_imx6q_tpc_defconfig. Some architecture checks are already make for EFI_LOADER. There is no need to repeat them for CMD_BOOTEFI_HELLO_COMPILE Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice.Chotard@st.com Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-10cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPATJean-Jacques Hiblot
The implementation of the EEPROM commands does not support the DM I2C API. Prevent compilation breakage by not enabling it if the non-DM API is not available (if DM_I2C is used without DM_I2C_COMPAT) Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-04cmd: add clear screen 'cls' commandAnatolij Gustschin
Add common clear screen command for configurations CONFIG_DM_VIDEO, CONFIG_LCD and CONFIG_CFB_CONSOLE. Remove the existing cls command implementation from lcd.c code and activate the command for all boards enabling CONFIG_LCD for compatibility reasons. Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Patrick.Delaunay <patrick.delaunay@free.fr>
2018-11-16cmd: pinmux: Add pinmux commandPatrice Chotard
pinmux command allows to : - list all pin-controllers available on platforms - select a pin-controller - display the muxing of all pins of the current pin-controller or all pin-controllers depending of given options Signed-off-by: Patrice Chotard <patrice.chotard@st.com> cmd: pinmux: Fix pinmux command if "pinmux status" command is used without having set dev using "pinmux dev", print pinmux usage Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14virtio: cmd: Add virtio command for virtio devicesTuomas Tynkkynen
Add 'virtio' command in U-Boot command line. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-13cmd: ubi: Remove useless call to mtdparts_init()Boris Brezillon
Commit c58fb2cdb3e4 ("cmd: ubi: clean the partition handling") introduced a call to mtd_probe_devices() in the ubi_attach() path and this function takes care of parsing mtdparts/mtdids and creating/registering the associated mtd partitions. The mtdparts_init() call in the ubi_detach() path is not only unnecessary but can sometimes print error messages even when things work properly (that's the case with SPI NAND devices that have not been probed with 'mtd list'), which is misleading. Remove this call to mtdparts_init() and drop the dependency on CMD_MTDPARTS. Fixes: c58fb2cdb3e4 ("cmd: ubi: clean the partition handling") Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13mtd: Make {MTDIDS, MTDPARTS}_DEFAULT visible when MTD_PARTITIONS is selectedBoris Brezillon
gwventana configs are relying on CMD_UBI to select CMD_MTDPARTS, which is then making {MTDIDS,MTDPARTS}_DEFAULT options available. We are about to remove the 'select CMD_MTDPARTS' statement in the CMD_UBI entry, but if we do that without first making sure {MTDIDS,MTDPARTS}_DEFAULT are visible, we end up with a build failure when building gwventana configs. Address that by adding a depends on MTD_PARTITIONS to {MTDIDS,MTDPARTS}_DEFAULT which does the trick since CMD_UBI selects MTD_UBI which in turn selects MTD_PARTITIONS. We also get rid of the depends on CMD_MTD, since CMD_MTD also selects MTD_PARTITIONS. Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
generated by cgit (git 2.34.1) at 2024-12-23 10:13:46 +0000