summaryrefslogtreecommitdiff
path: root/cmd
AgeCommit message (Collapse)Author
2019-10-23cmd: Add Support for UFS commandsFaiz Abbas
Add Support for commands to initialize and configure UFS devices. TODO: Add Support for commands to resize and reconfigure LUNs Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-17Merge tag 'for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubiTom Rini
ubi enhancements for 2020.01 - provide a way for skipping crc checks ported from linux, and add an U-Boot command to set this flag on already installed systems. - fix redundand environment management
2019-10-16ubi: Add "skipcheck" command to set/clear this bit in the UBI volume hdrStefan Roese
U-Boot now supports the "skip_check" flag to optionally skip the CRC check at open time. Currently its only possible to set this bit upon UBI volume creation. But it might be very useful to also set this bit on already installed systems (e.g. field upgrade) to make also use of the boot-time decrease on those systems. This patch now adds a new "ubi" command "ubi skipcheck" to set or clear this bit in the UBI volume header: => ubi skipcheck rootfs0 on Setting skip_check on volume rootfs0 BTW: This saves approx. 10 seconds Linux bootup time on a MT7688 based target with 128MiB of SPI NAND. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Quentin Schulz <quentin.schulz@bootlin.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Dannenberg <dannenberg@ti.com>
2019-10-16ubi: provide a way to skip CRC checksQuentin Schulz
Some users of static UBI volumes implement their own integrity check, thus making the volume CRC check done at open time useless. For instance, this is the case when one use the ubiblock + dm-verity + squashfs combination, where dm-verity already checks integrity of the block device but this time at the block granularity instead of verifying the whole volume. Skipping this test drastically improves the boot-time. Adapted to U-Boot by Stefan Roese. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Quentin Schulz <quentin.schulz@bootlin.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-15cmd: aes: use map_sysmem when accessing memoryPhilippe Reynes
The aes command used to segfault when accessing memory in sandbox. The pointer accesses should be mapped. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-12Merge branch '2019-10-11-master-imports'Tom Rini
- Assorted cleanups - FAT bugfixes - mediatek platform updates
2019-10-11cmd: itest: add support for .q size specifierMarek Szyprowski
Add support for quad (64bits) memory access specifier. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-10-11cmd: avoid decimal conversionT Karthik Reddy
This patch uses auto instead of decimal in simple_strtoul(). Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-11cmd: ti: ddr3: Move the print statement after testKrunal Bhargav
If the ECC is enabled over the entire memory region, we need to ensure the printf/put calls do not modify the stack after ECC is disabled. Moved the printf/put statements after ECC is enabled. Signed-off-by: Krunal Bhargav <k-bhargav@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11cmd: ti: ddr3: Fix ecc address calculationLokesh Vutla
ecc_address_range registers contains the start address and end address of the DDR address space. But the ddr cmd driver is assuming the register contains the start address and size of the DDR address space. Because of this some valid ecc addresses are errored out as invalid address. Fix this calculation. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-09Merge tag 'xilinx-for-v2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 FPGA: - Enable fpga loading on Versal - Minor fix Microblaze: - Fix LMB configurations to support initrds - Some other cleanups Zynq: - Minor config/dt changes - Add distro boot support for usb1 and mmc1 - Remove Xilinx private boot commands and use only distro boot ZynqMP: - Kconfig cleanups, defconfig updates - Update some dt files - Add firmware driver for talking to PMUFW - Extend distro boot support for jtag - Add new IDs - Add system controller configurations - Convert code to talk firmware via mailbox or SMCs Versal: - Add board_late_init() - Add run time DT memory setup - Add DFU support - Extend distro boot support for jtag and dfu - Add clock driver - Tune mini configurations Xilinx: - Improve documentation (boot scripts, dt binding) - Enable run time initrd_high calculation - Define default SYS_PROMPT - Add zynq/zynqmp virtual defconfig Drivers: - Add Xilinx mailbox driver for talking to firmware - Clean zynq_gem for Versal - Move ZYNQ_HISPD_BROKEN to Kconfig - Wire genphy_init() in phy.c - Add Xilinx gii2rgmii bridge - Cleanup zynq_sdhci - dwc3 fix - zynq_gpio fix - axi_emac fix Others: - apalis-tk1 - clean config file
2019-10-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Rename existing FSP code to fsp1 - Add fsp2 directory in preparation to support FSP 2.0 - Various x86 platform codes update - Various bug fixes and updates in dm core, sandbox and spl
2019-10-08Merge tag 'efi-2020-01-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-01-rc1 The major corrections in this pull request are: Fixes for the SetVariable() boot service. Device path node for NVMe drives. Disable CONFIG_CMD_NVEDIT by default.
2019-10-08arm64: zynqmp: Define default SYS_PROMPTMichal Simek
All boards are using the same prompt that's why add it as default value to Kconfig to simplify defconfigs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-08ARM: zynq: Define default SYS_PROMPTMichal Simek
All boards are using the same prompt that's why add it as default value to Kconfig to simplify defconfigs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08iod: Enhance to support display of multiple valuesSimon Glass
At present the 'iod' command differs from 'md' in that it only shows a single value. It is useful to see a dump of multiple values, particularly when x86 peripherals contain register sets accessible via I/O ports. Enhance the command to match md. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct multi-line comment format style] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Rename some FSP functions to have an fsp_ prefixSimon Glass
Given these exported function an fsp_ prefix since they are declared in an fsp.h header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Rename existing FSP code to fsp1Simon Glass
Since there is now a new version of the FSP and it is incompatible with the existing version, move the code into an fsp1 directory. This will allow us to put FSP v2 code into an fsp2 directory. Add a Kconfig which defines which version is in use. Some of the code in this new fsp1/ directory is generic across both FSPv1 and FSPv2. Future patches will address this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-06cmd: host: fix seg fault at "host info"AKASHI Takahiro
With the patch below applied, host_block_dev structure was switched to be placed in platdata rather than priv. The command "host info" must be aligned with this change. Otherwise, we will see "Segmentation Fault." Fixes: 8f994c860d91 ("sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-06cmd: disable CMD_NVEDIT_EFI by defaultHeinrich Schuchardt
The growth of the UEFI sub-system leads to build failures for systems with strict limits on the U-Boot image size. CMD_NVEDIT_EFI supports displaying and editing of UEFI variables. The setting is not needed for booting. Disabling it by default reduces the size of the U-Boot image by 2 KiB. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-06cmd: env: fix a typo in a comment of do_env_set_efi()AKASHI Takahiro
A wrong function name is referred to in a comment of do_env_set_efi(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-04Kconfig: fix a typo in the description of bmp command.Andrius Štikonas
Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
2019-10-04Kconfig: Migrate CONFIG_BOOTM_* optionsTom Rini
Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04cmd: part: number: return hexadecimal valueRoman Stratiienko
At this point we are using part number sub-command to retrieve UUID of the partition using it's name. e.g.: part number mmc $mmcdev system_a system_a_index part uuid mmc $mmcdev:${system_a_index} system_a_uuid Since 'part uuid' sub-command expects partition index in hex format and 'part number' returns decimal value, 'part uuid' command will provide wrong UUID or fail. Fixes: be683756f62034 ("cmd: part: Add 'number' sub-command") Cc: Dirk Behme <dirk.behme@de.bosch.com> Reported-by: Pontus Fuchs <pontus.fuchs@se.bosch.com> Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-10-04autoboot: add necessary dependency at AUTOBOOT_MENU_SHOWAKASHI Takahiro
Otherwise, menu_show() will be undefined in bootdelay_process(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-09-04net: introduce packet capture supportRamon Fried
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark) This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Tested-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04net: mdio: Clarify code flow Covarity 244085 & 244090Joe Hershberger
Document that the lack of breaks is intentional. Series-to: u-boot Series-cc: ti Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-26cmd: pci: Adjust display of digits for 64bit address and sizeKunihiko Hayashi
The command "pci bar" and "pci region" display the address and size in 16 characters including "0x", so the command can only display 14 hexadecimal digits if the number of digits in the address and size is less than 14. ID Base Size Width Type ---------------------------------------------------------- 0 0x00000020000000 0x00000000100000 64 MEM Prefetchable 1 0xffff000080000000 0x00000000100000 64 MEM Prefetchable The 64-bit address and size should be displayed in 18(= 16+2) digits, so this patch adjusts them. Cc: Yehuda Yitschak <yehuday@marvell.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-26cmd: gpio: remove redundant assignmentHeinrich Schuchardt
The assigned value NULL is overwritten before being used. Remove the assignment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-24Merge branch '2019-08-23-master-imports'Tom Rini
- Migrate CONFIG_MX_CYCLIC, CONFIG_FSL_USDHC and CONFIG_MXS_GPIO to Kconfig - Fix some SPL/TPL and ARM64 dependencies
2019-08-23Convert CONFIG_MX_CYCLIC to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_MX_CYCLIC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: David Lechner <david@lechnology.com>
2019-08-22clk: support clk tree dumpPeng Fan
The previous code only dump the clk list. This patch is to support clk tree dump, and also dump the enable_cnt. The code used in patch is similar to dm_dump_all, but the code here only filter out the UCLASS_CLK devices. On i.MX8MM, Partial output: u-boot=> clk dump Rate Usecnt Name ------------------------------------------ 24000000 0 |-- clock-osc-24m 24000000 0 | |-- dram_pll_ref_sel 750000000 0 | | `-- dram_pll 750000000 0 | | `-- dram_pll_bypass 750000000 0 | | `-- dram_pll_out 24000000 0 | |-- arm_pll_ref_sel 1200000000 0 | | `-- arm_pll 1200000000 0 | | `-- arm_pll_bypass 1200000000 0 | | `-- arm_pll_out 1200000000 0 | | `-- arm_a53_src 1200000000 0 | | `-- arm_a53_cg 1200000000 0 | | `-- arm_a53_div 24000000 4 | |-- sys_pll1_ref_sel 800000000 4 | | `-- sys_pll1 800000000 4 | | `-- sys_pll1_bypass 800000000 4 | | `-- sys_pll1_out 40000000 0 | | |-- sys_pll1_40m Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-18cbfs: Move result variable into the structSimon Glass
Move the result variable into the struct also, so that it can be used when BSS is not available. Add a function to read it. Note that all functions sill use the BSS version of the data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-11Drop PCMCIASimon Glass
This is no-longer used in U-Boot and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Rename environment.h to env_internal.hSimon Glass
This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Drop environment.h header file where not neededSimon Glass
This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Drop the ACTION typedefSimon Glass
Avoid using a typedef here which is unnecessary. Add an 'env_' prefix to both the enum and its members to make it clear that these are related to the environment. Add an ENV prefix to these two flags so that it is clear what they relate to. Also move them to env.h since they are part of the public API. Use an enum rather than a #define to tie them together. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Rename the redundancy flagsSimon Glass
Add an ENV prefix to these two flags so that it is clear what they relate to. Also move them to env.h since they are part of the public API. Use an enum rather than a #define to tie them together. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Drop the ENTRY typedefSimon Glass
U-Boot is not supposed to use typedef for structs anymore. Also this name is the same as the ENTRY() macro used in assembler files, and 'entry' itself is widely used in U-Boot (>8k matches). Drop the typedef and rename the struct to env_entry to reduce confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move get/set_default_env() to env.hSimon Glass
Move these functions to the new header file and rename set_default_env() to env_set_default() so that it has a consistent env_ prefix. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move set_default_vars to env.hSimon Glass
Move this function to the new header file and rename it so it has an env_ prefix. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: net: Move eth_parse_enetaddr() to net.c/hSimon Glass
This function fits better with the network subsystem, so move it. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get() to env.hSimon Glass
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set() to env.hSimon Glass
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get_hex() to env.hSimon Glass
Move env_get_hex() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get_yesno() to env.hSimon Glass
Move env_get_yesno() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_set_ulong() to env.hSimon Glass
Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_set_hex() to env.hSimon Glass
Move env_set_hex() over to the new header file along with env_set_addr() which uses it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move envmatch() to env.hSimon Glass
Move envmatch() over to the new header file. Also rename it to env_match() to better line up with other functions. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get_f() to env.hSimon Glass
Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2024-12-26 06:29:54 +0000