summaryrefslogtreecommitdiff
path: root/cmd
AgeCommit message (Collapse)Author
2020-06-30efi_loader: incorrect check against FDT_ADDR_T_NONEHeinrich Schuchardt
With commit 0d7c2913fdf7 ("cmd: bootefi: Honor the address & size cells properties correctly") addr was replaced by fdt_addr. But not in the check against FDT_ADDR_T_NONE. Fixes: 0d7c2913fdf7 ("cmd: bootefi: Honor the address & size cells properties correctly") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-29spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-25Merge tag 'efi-2020-07-rc6' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc6 Corrections for variable definitions are provided: * Correct size of secure boot related UEFI variables. * Do not use int for storing an enum. * Replace fdt_addr by fdt_size where needed.
2020-06-25bdinfo: Update the file commentsSimon Glass
Update the comment at the top of the file to indicate what this file does. Also drop the line at the bottom and an unnecessary header include. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: m68k: ppc: Move arch-specific code from bdinfoSimon Glass
We don't have an easy way to share these three lines of code with two architectures. We also want to make it clear that this code is actually arch-specific. So just duplicate it in each arch-specific file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: m68k: Move m68k-specific info into its own fileSimon Glass
We don't really want to have m68k-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com> Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com>
2020-06-25bdinfo: ppc: Move PPC-specific info into its own fileSimon Glass
We don't really want to have PPC-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: arm: Move ARM-specific info into its own fileSimon Glass
We don't really want to have ARM-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Export some basic printing functionsSimon Glass
At present the functions to print a number and a frequency are static. We want to move some of the code in here to an arch-specific file. For consistency that code should use these same functions. So export them with an appropriate name. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: net: Inline print_eth_ip_addr()Simon Glass
This function only has two lines of code now, so inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: net: Drop legacy ethernet bdinfoSimon Glass
This code pre-dates driver model and the migration date is nearly upon us. Pare the print_eths() function down and enable it for driver model, since it works correctly. The IP address is already printed in print_eth_ip_addr() so we can remove that. Since this results in a one-line print_eths() function, inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: net: ppc: Drop prints for CONFIG_HAS_ETHnSimon Glass
These config options have not been migrated to Kconfig. This should be handled using driver model, iterating over the available Ethernet devices. For now, remove the code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: Drop print_cpu_word_size()Simon Glass
This function only has one line of code in it so inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop print_bi_flash()Simon Glass
This function only has three lines of code in it so inline it. This helps to put all the code in one place for future partitioning. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop print_bi_boot_params()Simon Glass
This function only has one line of code in it so inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: sh: arc: Drop arch-specific print_bi_mem()Simon Glass
It isn't worth having arch-specific code for such minor output differences. In fact it is better if all archs are consistent. Drop the arch-specific code in print_bi_mem() and inline it to avoid a two-line function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-06-25bdinfo: ppc: Drop arch-specific print_baudrate()Simon Glass
This function outputs the same basic info. Since the baud rate is commonly 115200 these is often no difference. Drop the arch-specific code and inline it to avoid a one-line function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: Drop print_std_bdinfo()Simon Glass
Everything in this function is standard now so it serves no purpose. Move it into the generic do_bdinfo() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop unnecessary inline on functionsSimon Glass
This serves no purpose since the compiler will inline the functions automatically. Drop use of inline in this file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: microblaze: sh: nios2: Drop arch-specific flash infoSimon Glass
The differences these architectures have are minor and not worth the extra code. Use the generic version always. Tidy up the code style by removing unnecessary tabs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop unused __maybe_unusedSimon Glass
Some of these are not needed now. Drop them to avoid cluttering the code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop the option to not use the generic 'bd' commandSimon Glass
Now that all architectures are using the generic do_bdinfo(), drop the option to not use it. When new architectures are added, they will get at least some useful information from the generic implementation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: arc: Use the generic bd commandSimon Glass
There is nothing new in the arc 'bd' command beyond what is already there. Switch it over to use the generic code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: arm: Use the generic bd commandSimon Glass
Unfortunately ARM has a lot of special stuff. Move it into the generic function for now, so we can have it all in one place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: m68k: Use the generic bd commandSimon Glass
Unfortunately m68k has a lot of special stuff. Move it into the generic function for now, so we can have it all in one place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: powerpc: Use the generic bd commandSimon Glass
Unfortunately PowerPC has a lot of special stuff. Move it into the generic function for now, so we can have it all in one place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: riscv: Use the generic bd commandSimon Glass
This arch has none of its own info to show. Move it over to use the generic do_bdinfo(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: nds32: Use the generic bd commandSimon Glass
This arch has none of its own info to show. Move it over to use the generic do_bdinfo(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: sandbox: Use the generic bd commandSimon Glass
Sandbox has a printout of 'FB base' but this code is not used since sandbox uses driver model for everything. Move sandbox over to use the generic do_bdinfo(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: x86: Use the generic bd commandSimon Glass
This arch shows 'ethspeed' info but only the freescale drivers use it, so it can be dropped. It also calls print_bi_dram() which is safe to call from any arch since it has an #ifdef inside it. Add this to the generic do_bdinfo() and move x86 over to use it. Put it first since pytests rely on seeing it before memstart in find_ram_base(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: sh: Use the generic bd commandSimon Glass
This arch has no code that is not already in the generic function. Drop the arch-specific function and change sh over to use the generic one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: microblaze: Use the generic bd commandSimon Glass
Microblaze prints out ethernet and FDT information. This is useful to most archs, so move it into the generic code and move microblaze over to use it. Note that FDT information is shown for all boards, since they should be using device tree by now. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: nios2: Use the generic bd commandSimon Glass
Nios2 currently has some code to output SRAM information which is behind an #ifdef. No nios2 boards define this option, so the code can be removed. Move Nios2 over to use the generic function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: mips: Use the generic bd commandSimon Glass
MIPS currently has a few extra things which are generally useful. Add them to the generic function and move MIPS over to use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-06-25bdinfo: xtensa: Create a generic do_bdinfo for xtensaSimon Glass
This arch uses only the generic function. It would be nice if all the archs did the same. As a first step, create a new generic function for the 'bd' command and make xtensa use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24cmd: bootefi: Fix fdt_size variable type in efi_carve_out_dt_rsv()Bin Meng
Variable fdt_size should be of type 'fdt_size_t', not 'fdt_addr_t'. Fixes 0d7c2913fdf7: ("cmd: bootefi: Honor the address & size cells properties correctly") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-24Merge tag 'mmc-2020-6-24' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- Fix fsl_esdhc_imx tunning mask - Disable CMD CRC for normal tuning for fsl_esdhc_imx - Retry CM1 until emmc ready - Fix sdhci HISPD handling - Cache-aligned extcsd reading
2020-06-24cmd: mmc: Cache-align extcsd read targetMarek Vasut
The extcsd read target must be cache aligned in case the controller uses DMA to read the extcsd register, make it so. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2020-06-23cmd: booti: Fix spelling of "environment".Vagrant Cascadian
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-19Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi into nextTom Rini
- Convert fsl_espi to driver model (Chuanhua) - Enable am335x baltos to DM_SPI (Jagan) - Drop few powerpc board which doesn't have DM enabled (Jagan)
2020-06-19cmd: bootefi: Honor the address & size cells properties correctlyAtish Patra
fdtdec_get_addr_size reads the uses a fixed value for address & size cell properties which may not be correct always. Use the auto variant of the function which automatically reads #address-cells & #size-cells from parent and uses to read the "reg" property. Signed-off-by: Atish Patra <atish.patra@wdc.com> On 32 bit systems fdt_addr_t may be 4 bytes long but size is defined as u64. Avoid filling the upper 4 bytes of the sizep parameter of fdtdec_get_addr_size_auto_parent() with random bytes from the stack by defining a separate variable fdt_size. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-15trivial: Fix booot occurencesMichal Simek
s/booot/boot/g The first ase is booot instead of boot and second u-booot instead of u-boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-06-13Merge tag 'dm-pull-12jun20' of git://git.denx.de/u-boot-dm into nextTom Rini
patman improvements to allow it to work with Zephyr change to how sequence numbers are assigned to devices minor fixes and improvements
2020-06-12net: Fix error if some network features are disabledKrebs, Olaf
If 'CONFIG_CMD_TFTPBOOT' or 'CONFIG_CMD_BOOTP' are disabled, the usage must be disabled, too! Signed-off-by: Olaf Krebs <olaf.krebs@emh-metering.com> CC: Joe Hershberger <joe.hershberger@ni.com>
2020-06-11log: check argument of 'log level' commandHeinrich Schuchardt
Check that the argument provided to the 'log level' command is in the range between zero and CONFIG_LOG_MAX_LEVEL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-03Merge tag 'efi-2020-07-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc4 This patch series addresses the following issues: * allow compiling with clang * add missing function descriptions to the HTML documentation * simplify the validation of UEFI images * validate load options in the UEFI boot manager In a preparatory patch a structure definition is moved.
2020-06-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- Toshiba spinand (Yoshio) - SPI/SPI Flash cleanup (Jagan) - Remove SH SPI (Jagan)
2020-06-03efi_loader: validate load optionHeinrich Schuchardt
For passing the optional data of the load option to the loaded imaged protocol we need its size. efi_deserialize_load_option() is changed to return the size of the optional data. As a by-product we get a partial validation of the load option. Checking the length of the device path remains to be implemented. Some Coverity defects identified the load options as user input because get_unaligned_le32() and get_unaligned_le16() is called. But non of these Coverity defects can be resolved without marking functions with Coverity specific tags. Reported-by: Coverity (CID 303760) Reported-by: Coverity (CID 303768) Reported-by: Coverity (CID 303776) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-02cmd: fitupd: move config check to KconfigHeinrich Schuchardt
Configuration checks should not be in the C files but in the Kconfig files. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2024-12-23 18:44:23 +0000