summaryrefslogtreecommitdiff
path: root/cmd
AgeCommit message (Collapse)Author
2019-05-18CONFIG_SPL_SYS_[DI]CACHE_OFF: addTrevor Woerner
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-12efi_loader: comments for efi_install_fdt()Heinrich Schuchardt
Describe that efi_install_fdt() defaults to using the device tree indicated by environment variable fdtcontroladdr. ACPI tables and device trees are mutually exclusive. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12efi_loader: deduplicate code in cmd/bootefi.cHeinrich Schuchardt
Move duplicate initialization code to single instance. Adjust comments of concerned functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12efi_loader: make device path to text protocol customizableHeinrich Schuchardt
The device path to text protocol is not needed for EBBR compliance. So let's make it a customizable option. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-10cmd: ubifs: Remove select for non-existent optionChris Packham
There is no 'config CRC32', remove the select that was attempting to use it. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-05-09Merge git://git.denx.de/u-boot-riscvTom Rini
- Correct SYS_TEXT_BASE for qemu. - Support booti. - Increase SYSBOOTM_LEN for Fedora/RISCV kernel. - Support SMP booting from flash.
2019-05-09RISCV: image: Add booti supportAtish Patra
This patch adds booti support for RISC-V Linux kernel. The existing bootm method will also continue to work as it is. It depends on the following kernel patch which adds the header to the flat Image. Gzip compressed Image (Image.gz) support is not enabled with this patch. https://patchwork.kernel.org/patch/10925543/ Tested on HiFive Unleashed and QEMU. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Karsten Merker <merker@debian.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2019-05-08Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
- Various PHY fixes / enhancements. - TI K2G fixes
2019-05-07cmd: mdio: Switch to generic helpers when accessing the registersCarlo Caione
Switch to use the generic helpers to access the MMD registers so that we can used the same command also for C45 PHYs, C22 PHYs with direct and indirect access and PHYs implementing a custom way to access the registers. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-07efi_loader: clean up UEFI sub-system initializationHeinrich Schuchardt
allow_unaligned(), switch_to_non_secure_mode(), and efi_init_obj_list() are called in sequence in multiple places. Move calls to allow_unaligned() and switch_to_non_secure_mode() to efi_init_obj_list(). Remove unused includes. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-06Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Various pinctrl / gpio fixes for R-Car
2019-05-05cmd: pxe: add board specific PXE default pathMarek Behún
The list of PXE default paths contains ARCH and SOC specific paths, but one PXE server can serve different board with the same ARCH and SOC. This is the case for Turris Omnia and Turris Mox, where ARCH=arm and SOC=mvebu. If CONFIG_SYS_BOARD is defined, also try "default-$ARCH-$SOC-$BOARD" path. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-04cmd: mmc: Make Mode: printout consistentMarek Vasut
The "Mode :" line is the only one in "mmc info" output that has a space in front of the colon. Drop the space to make it consistent with the rest of the output, e.g.: => mmc dev 1 ; mmc info switch to partitions #0, OK mmc1 is current device Device: sd@ee160000 Manufacturer ID: 3 OEM: 5344 Name: SL08G Bus Speed: 50000000 Mode : SD High Speed (50MHz) ^------------------------------ Remove this space Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 7.4 GiB Bus Width: 1-bit Erase Group Size: 512 Bytes Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> CC: Tom Rini <trini@konsulko.com>
2019-05-04cmd: clk: Handle ENODEV from clk_get_rateIsmael Luceno Cortes
clk_get_rate may return -ENODEV if the clock isn't valid. Also, make the error cases go through a single path. Fixes: ff8eee0330a6 ("cmd: clk: Add trivial implementation of clock dump for DM") Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2019-05-03Merge tag 'efi-2019-07-rc2' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc2 This pull request provides error fixes for the handling of GPT partitions and for the UEFI subsystem.
2019-05-02cmd: gpt: fix and tidy up help messageEugeniu Rosca
Apply the following changes: - Guard the 'gpt read' command by 'ifdef CONFIG_CMD_GPT_RENAME', since 'gpt read' is not available on CMD_GPT_RENAME=n - Prefix the {read,swap,rename} commands with one space for consistency - Prefix the 'guid' commands with 'gpt' for consistency Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-02efi_loader: implement support of exit dataHeinrich Schuchardt
In case of a failure exit data may be passed to Exit() which in turn is returned by StartImage(). Let the `bootefi` command print the exit data string in case of an error. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-02efi_loader: memory leak in append valueHeinrich Schuchardt
When printing an UEFI variable an error may arise while converting an illegal hexadecimal value. In this case a buffer is leaked. Close the memory leak. Provide an error message. Reported-by: Coverity (CID 185830) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-02efi_loader: optional data in load options are binaryHeinrich Schuchardt
The field boot OptionalData in structure _EFI_LOAD_OPTIONS is for binary data. When we use `efidebug boot add` we should convert the 5th argument from UTF-8 to UTF-16 before putting it into the BootXXXX variable. When printing boot variables with `efidebug boot dump` we should support the OptionalData being arbitrary binary data. So let's dump the data as hexadecimal values. Here is an example session protocol: => efidebug boot add 00a1 label1 scsi 0:1 doit1 'my option' => efidebug boot add 00a2 label2 scsi 0:1 doit2 => efidebug boot dump Boot00A0: attributes: A-- (0x00000001) label: label1 file_path: .../HD(1,MBR,0xeac4e18b,0x800,0x3fffe)/doit1 data: 00000000: 6d 00 79 00 20 00 6f 00 70 00 74 00 69 00 6f 00 m.y. .o.p.t.i.o. 00000010: 6e 00 00 00 n... Boot00A1: attributes: A-- (0x00000001) label: label2 file_path: .../HD(1,MBR,0xeac4e18b,0x800,0x3fffe)/doit2 data: Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-02cmd: efidebug: rework "boot dump" sub-command using GetNextVariableName()AKASHI Takahiro
Currently in do_efi_boot_dump(), we directly read EFI variables from related environment variables. To accommodate alternative storage backends, we should switch to using the UEFI API instead. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-02efi_loader: set OsIndicationsSupported at initAKASHI Takahiro
UEFI variables should be installed using well-defined API. Currently we don't support much, but the value of OsIndicationsSupported will be updated once some features are added in the future. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Add comments. Rename a variable. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-26avb: add support for named persistent valuesIgor Opaniuk
AVB 2.0 spec. revision 1.1 introduces support for named persistent values that must be tamper evident and allows AVB to store arbitrary key-value pairs [1]. Introduce implementation of two additional AVB operations read_persistent_value()/write_persistent_value() for retrieving/storing named persistent values. Correspondent pull request in the OP-TEE OS project repo [2]. [1]: https://android.googlesource.com/platform/external/avb/+/android-9.0.0_r22 [2]: https://github.com/OP-TEE/optee_os/pull/2699 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-04-26cmd: pxe: Display splashscreen from extlinux.conf inputPatrice Chotard
The objective is to provide a simple way to retrieve a BMP file, and display it as splashscreen, from extlinux.conf file input. For this, we take example on https://www.syslinux.org/wiki/ index.php?title=Menu#The_advanced_menu_system and more particularly on MENU BACKGROUND chapter. For this, add "menu background" support in pxe command. As example, extlinux.conf content will look like: # Generic Distro Configuration file generated by OpenEmbedded menu title Select the boot mode TIMEOUT 20 menu background ../splash.bmp DEFAULT stm32mp157c-ev1-sdcard LABEL stm32mp157c-ev1-sdcard KERNEL /uImage FDT /stm32mp157c-ev1.dtb APPEND root=/dev/mmcblk0p6 rootwait rw earlyprintk console=ttySTM0,115200 Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-26Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2019-04-25Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without ↵Simon Goldschmidt
DM_I2C_COMPAT" This reverts commit 65a97e7fcf54feb7c4ebe1aee8a572830af4cf51. The 'eeprom' command has been converted to work with DM_I2C in a patch submitted around the same time as this commit: commit 0c07a9b4078d ("eeprom: Add device model based I2C support to eeprom command") Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-25eeprom: fix DM_I2C support without CONFIG_SYS_I2C_EEPROM_BUSSimon Goldschmidt
The current device model enabled eeprom code only works if CONFIG_SYS_I2C_EEPROM_BUS is set. This patch makes it work without that define so that the bus number passed to 'eeprom_init' is used. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-24Merge tag 'pull-24apr19' of git://git.denx.de/u-boot-dmTom Rini
Various minor sandbox iumprovements Fixes for tracing with sandbox Refactoring for boot_get_fdt()
2019-04-24Merge tag 'efi-2019-07-rc1-3' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc1 (3) This patch series reworks the implementation of the `bootefi` command to remove code duplication by using the LoadImage() boot service to load binaries. Missing short texts for UEFI protocols are added for display by the `efidebug dh` command. Missing parameter checks for AllocatePages() and CreateDeviceNode() are implemented. The constants for protocol GUIDs are changed to match the names in the UEFI specification.
2019-04-23Convert CONFIG_TRACE to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_TRACE Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23common: command: Add command execution tracer.Christoph Muellner
When using boot scripts it can become quite hard to understand which commands are actually executed during bootup (e.g. where is a kernel image loaded from or which DTB is in use). Shell scripts suffer from a similar problem and many shells address this problem with a command execution tracer (e.g. BASH has xtrace, which can be enabled by "set -x"). This patch introduces a command tracer for U-Boot, which prints every command with its arguments before it is executed. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-23efi_loader: need either ACPI table or device treeHeinrich Schuchardt
The EBBR specification prescribes that we should have either an ACPI table or a device tree but not both. Let us enforce this condition in the `bootefi` command. If the bootefi command is called without a device tree parameter use a previously device tree or fall back to the internal device tree. The fdt unit test should not be run on boards with an ACPI table. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: rework bootmgr/bootefi using load_image APIAKASHI Takahiro
In the current implementation, bootefi command and EFI boot manager don't use load_image API, instead, use more primitive and internal functions. This will introduce duplicated code and potentially unknown bugs as well as inconsistent behaviours. With this patch, do_efibootmgr() and do_boot_efi() are completely overhauled and re-implemented using load_image API. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Use efi_root as parent handle for the loaded image. LoadImage() should be called with BootPolicy = true by the boot manager. Avoid duplicate free_pool(). Eliminate variable memdp which is not needed after anymore due to "efi_loader: correctly split device path of loaded image". Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23cmd: bootefi: carve out do_bootefi_image() from do_bootefi()AKASHI Takahiro
This is a preparatory patch for reworking do_bootefi() in later patch. All the non-boot-manager-based (that is, bootefi <addr>) code is put into one function, do_bootefi_image(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23cmd: bootefi: carve out bootmgr code from do_bootefi()AKASHI Takahiro
This is a preparatory patch for reworking do_bootefi() in later patch. do_bootmgr_exec() is renamed to do_efibootmgr() as we put all the necessary code into this function. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23cmd: bootefi: move do_bootefi_bootmgr_exec() forwardAKASHI Takahiro
This is a preparatory patch for reworking do_bootefi() in later patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23cmd: bootefi: carve out efi_selftest code from do_bootefi()AKASHI Takahiro
This is a preparatory patch for reworking do_bootefi() in later patch. Efi_selftest code is unusual in terms of execution path in do_bootefi(), which make that function complicated and hard to understand. With this patch, all efi_selftest related code will be put in a separate function. The change also includes expanding efi_run_prepare() and efi_run_finish() in do_bootefi_exec(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23cmd: bootefi: merge efi_install_fdt() and efi_process_fdt()AKASHI Takahiro
This is a preparatory patch for reworking do_bootefi() in later patch. For simplicity, merge two functions. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Return error code of efi_install_configuration_table() when aborting from efi_install_fdt(). Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23cmd: bootefi: carve out fdt handling from do_bootefi()AKASHI Takahiro
This is a preparatory patch for reworking do_bootefi() in later patch. Carve out a function to handle the installation of the device tree as a configuration table in system table. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23cmd: bootefi: rework set_load_options()AKASHI Takahiro
set_load_options() can fail, so it should return error code to stop invoking an image. In addition, set_load_options() now takes a handle, instead of loaded_image_info, to utilize efi_load_image() in a later patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: more short texts for protocols in efidebugHeinrich Schuchardt
The `efidebug dh` command shows handles and the installed protocols. For most of the protocols implemented by U-Boot a short text was shown. But for some only the GUID was displayed. Provide the missing short texts for the following protocols: HII String, HII Database, HII Config Routing, Simple Network, PXE Base Code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: consistent naming of protocol GUIDsHeinrich Schuchardt
We should consistently use the same name for protocol GUIDs as defined in the UEFI specification. Not adhering to this rule has led to duplicate definitions for the EFI_LOADED_IMAGE_PROTOCOL_GUID. Adjust misnamed protocol GUIDs. Adjust the text for the graphics output protocol in the output of the `efidebug dh` command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-22cmd: ximg.c: Add support for getting external data address and lengthTien Fong Chee
This function supports getting both data address and length for existing FIT subimage and FIT external data. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-04-22cmd: add exception commandHeinrich Schuchardt
The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-21usb: reload watchdog during ums commandPatrick Delaunay
Reload the watchdog in the mass storage command ums to avoid reboot during the usb waiting loop when the host doesn't send any request. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21dfu: Avoid declaring unused variables and absent parametersAndy Shevchenko
The compiler is not happy when neither USB nor TFTP transport for DFU defined: cmd/dfu.c: In function ‘do_dfu’: cmd/dfu.c:31:8: warning: unused variable ‘devstring’ [-Wunused-variable] char *devstring = argv[3]; ^~~~~~~~~ cmd/dfu.c:30:8: warning: unused variable ‘interface’ [-Wunused-variable] char *interface = argv[2]; ^~~~~~~~~ Surround those variables by #ifdef expression. More serious, that comes under same circumstances, is a compilation error due to absence of macro parameter: In file included from include/image.h:45, from include/common.h:35, from cmd/dfu.c:13: include/command.h:207:24: error: expected expression before ‘,’ token # define _CMD_HELP(x) x, ^ include/command.h:286:18: note: in expansion of macro ‘_CMD_HELP’ _cmd, _usage, _CMD_HELP(_help) _CMD_COMPLETE(_comp) } ^~~~~~~~~ include/command.h:290:3: note: in expansion of macro ‘U_BOOT_CMD_MKENT_COMPLETE’ U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ ^~~~~~~~~~~~~~~~~~~~~~~~~ include/command.h:332:2: note: in expansion of macro ‘U_BOOT_CMD_COMPLETE’ U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL) ^~~~~~~~~~~~~~~~~~~ cmd/dfu.c:70:1: note: in expansion of macro ‘U_BOOT_CMD’ U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu, ^~~~~~~~~~ make[1]: *** [scripts/Makefile.build:279: cmd/dfu.o] Error 1 make: *** [Makefile:1518: cmd] Error 2 Put empty string unconditionally to have macro parameter present. Fixes: 0f44d33536a5 ("dfu: Fix up the Kconfig mess") Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-04-17Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx/FPGA changes for v2019.07 fpga: - Add support for external data in FIT - Extend testing for external data case - Inform user about a need to run post config on Zynq arm: - Tune zynq command functions - Fix internal variable setting arm64: - Add support for zc39dr decoding - Disable WDT for zcu100 - Small changes in reset_reason() - Some DT changes (spi) - Tune qspi-mini configuration - Remove useless eeprom setting - Fix two sdhci boot case spi: - Fix tap delay programming clk: - Enable i2c in SPL net: - Fix gem phydev handling - Remove phy detection code from gem driver general: - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-16fpga: Add support for getting external data address and lengthTien Fong Chee
This function supports getting both data address and length for existing FPGA subimage and FPGA external data. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15Merge tag 'efi-2019-07-rc1-2' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc1 (2) In the aarch64 crash dump information about the loaded EFI images is added. In README.uefi the development target is for the UEFI subsystem is described as "Embedded Base Boot Requirements (EBBR) Specification" compliance. Several bug fixes are supplied.
2019-04-14Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
Conflicts: arch/arm/dts/armada-385-amc.dts arch/arm/dts/armada-xp-theadorable.dts arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2024-12-27 03:00:13 +0000