summaryrefslogtreecommitdiff
path: root/cmd
AgeCommit message (Collapse)Author
2020-07-09rtc: add rtc commandRasmus Villemoes
Mostly as an aid for debugging RTC drivers, provide a command that can be used to read/write arbitrary registers (assuming the driver provides the read/write methods or their single-register-at-a-time variants). Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-07-08cmd: Add a memory-search commandSimon Glass
It is useful to be able to find hex values and strings in a memory range. Add a command to support this. cmd: Fix 'md' and add a memory-search command At present 'md.q' is broken. This series provides a fix for this. It also implements a new memory-search command called 'ms'. It allows searching memory for hex and string data. END Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-08cmd: mem: Drop #ifdef for MEM_SUPPORT_64BIT_DATASimon Glass
This is defined only when __lp64__ is defined. That means that ulong is 64 bits long. Therefore we don't need to use a separate u64 type on those architectures. Fix up the code to take advantage of that, removing the preprocessor conditions. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-08cmd: mem: Use a macro to avoid #ifdef in helpSimon Glass
It is a bit painful to have #ifdefs in the middle of the help for each command. Add a macro to avoid this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-08Update MEM_SUPPORT_64BIT_DATA to be always definedSimon Glass
Define this macro always so we don't need the preprocessor to check it. Convert the users to #if instead of #ifdef. Note that '#if MEM_SUPPORT_64BIT_DATA' does not give an error if the macro is not define. It just assumes zero. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-08cmd: add a panic commandHeiko Stuebner
Even in boot scripts it may be needed to "panic" when all options are exhausted and the device specification specifies hanging instead of resetting the board. So add a new panic command that just wraps around the core panic call in U-Boot and can take an optional message. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-07cmd: blkls: Add blkls commandNiel Fourie
Add a command to print a list of available block device drivers, and for each, the list of known block devices. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-07cmd: dm: Fixed/Added DM driver listing subcommandsNiel Fourie
Renamed dm "drivers" subcommand to "compat" (as it listed compatibility strings) and prevent it from segfaulting when drivers have no of_match populated. Added a new "drivers" subcommand to dump a list of all known DM drivers and for each, their uclass id, uclass driver and names of attached devices. Added a new "static" subcommand to dump a list of DM drivers with statically defined platform data. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-07cmd: fs: Add command to list supported fs typesNiel Fourie
Added command "fstypes" to list supported/included filesystems. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Limit to sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-07cmd: part: Add subcommand to list supported partition tablesNiel Fourie
Add a subcommand "types" to the part command, which lists the supported partition table types. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-07cmd: env: use ENV_IS_IN_DEVICE in env infoPatrick Delaunay
Use the define ENV_IS_IN_DEVICE to test if one the CONFIG_ENV_IS_IN_... is defined and correct the detection of persistent storage support in the command "env info" if CONFIG_ENV_IS_NOWHERE is activated. Since commit 60d5ed2593c9 ("env: allow ENV_IS_NOWHERE with other storage target") test CONFIG_ENV_IS_NOWHERE is not enough; see also commit 953db29a1e9c6 ("env: enable saveenv command when one CONFIG_ENV_IS_IN is activated"). This patch avoids issue for this command in stm32mp1 platform. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-05Merge tag 'efi-2020-10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi into next Pull request for UEFI sub-system for efi-2020-10-rc1 This series comprises error corrections for the UEFI subsystem: * correct consideration of timestamps for variable authentication * correct collection of data regions for code authentication * correct unit tests to test loading dbx * enable FAT_WRITE as required by the UEFI spec The boot manager uses log functions instead of printf() and debug(). The UEFI intialization state is exported.
2020-06-30Merge tag 'mips-pull-2020-06-29' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next - net: pcnet: cleanup and add DM support - Makefile: add rule to build an endian-swapped U-Boot image used by MIPS Malta EL variants - CI: add Qemu tests for MIPS Malta
2020-06-30efi_loader: incorrect check against FDT_ADDR_T_NONEHeinrich Schuchardt
With commit 0d7c2913fdf7 ("cmd: bootefi: Honor the address & size cells properties correctly") addr was replaced by fdt_addr. But not in the check against FDT_ADDR_T_NONE. Fixes: 0d7c2913fdf7 ("cmd: bootefi: Honor the address & size cells properties correctly") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-29spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-25Merge tag 'efi-2020-07-rc6' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc6 Corrections for variable definitions are provided: * Correct size of secure boot related UEFI variables. * Do not use int for storing an enum. * Replace fdt_addr by fdt_size where needed.
2020-06-25bdinfo: Update the file commentsSimon Glass
Update the comment at the top of the file to indicate what this file does. Also drop the line at the bottom and an unnecessary header include. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: m68k: ppc: Move arch-specific code from bdinfoSimon Glass
We don't have an easy way to share these three lines of code with two architectures. We also want to make it clear that this code is actually arch-specific. So just duplicate it in each arch-specific file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: m68k: Move m68k-specific info into its own fileSimon Glass
We don't really want to have m68k-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com> Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com>
2020-06-25bdinfo: ppc: Move PPC-specific info into its own fileSimon Glass
We don't really want to have PPC-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: arm: Move ARM-specific info into its own fileSimon Glass
We don't really want to have ARM-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Export some basic printing functionsSimon Glass
At present the functions to print a number and a frequency are static. We want to move some of the code in here to an arch-specific file. For consistency that code should use these same functions. So export them with an appropriate name. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: net: Inline print_eth_ip_addr()Simon Glass
This function only has two lines of code now, so inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: net: Drop legacy ethernet bdinfoSimon Glass
This code pre-dates driver model and the migration date is nearly upon us. Pare the print_eths() function down and enable it for driver model, since it works correctly. The IP address is already printed in print_eth_ip_addr() so we can remove that. Since this results in a one-line print_eths() function, inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: net: ppc: Drop prints for CONFIG_HAS_ETHnSimon Glass
These config options have not been migrated to Kconfig. This should be handled using driver model, iterating over the available Ethernet devices. For now, remove the code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: Drop print_cpu_word_size()Simon Glass
This function only has one line of code in it so inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop print_bi_flash()Simon Glass
This function only has three lines of code in it so inline it. This helps to put all the code in one place for future partitioning. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop print_bi_boot_params()Simon Glass
This function only has one line of code in it so inline it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: sh: arc: Drop arch-specific print_bi_mem()Simon Glass
It isn't worth having arch-specific code for such minor output differences. In fact it is better if all archs are consistent. Drop the arch-specific code in print_bi_mem() and inline it to avoid a two-line function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-06-25bdinfo: ppc: Drop arch-specific print_baudrate()Simon Glass
This function outputs the same basic info. Since the baud rate is commonly 115200 these is often no difference. Drop the arch-specific code and inline it to avoid a one-line function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: Drop print_std_bdinfo()Simon Glass
Everything in this function is standard now so it serves no purpose. Move it into the generic do_bdinfo() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop unnecessary inline on functionsSimon Glass
This serves no purpose since the compiler will inline the functions automatically. Drop use of inline in this file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: microblaze: sh: nios2: Drop arch-specific flash infoSimon Glass
The differences these architectures have are minor and not worth the extra code. Use the generic version always. Tidy up the code style by removing unnecessary tabs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop unused __maybe_unusedSimon Glass
Some of these are not needed now. Drop them to avoid cluttering the code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Drop the option to not use the generic 'bd' commandSimon Glass
Now that all architectures are using the generic do_bdinfo(), drop the option to not use it. When new architectures are added, they will get at least some useful information from the generic implementation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: arc: Use the generic bd commandSimon Glass
There is nothing new in the arc 'bd' command beyond what is already there. Switch it over to use the generic code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: arm: Use the generic bd commandSimon Glass
Unfortunately ARM has a lot of special stuff. Move it into the generic function for now, so we can have it all in one place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: m68k: Use the generic bd commandSimon Glass
Unfortunately m68k has a lot of special stuff. Move it into the generic function for now, so we can have it all in one place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: powerpc: Use the generic bd commandSimon Glass
Unfortunately PowerPC has a lot of special stuff. Move it into the generic function for now, so we can have it all in one place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: riscv: Use the generic bd commandSimon Glass
This arch has none of its own info to show. Move it over to use the generic do_bdinfo(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: nds32: Use the generic bd commandSimon Glass
This arch has none of its own info to show. Move it over to use the generic do_bdinfo(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: sandbox: Use the generic bd commandSimon Glass
Sandbox has a printout of 'FB base' but this code is not used since sandbox uses driver model for everything. Move sandbox over to use the generic do_bdinfo(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: x86: Use the generic bd commandSimon Glass
This arch shows 'ethspeed' info but only the freescale drivers use it, so it can be dropped. It also calls print_bi_dram() which is safe to call from any arch since it has an #ifdef inside it. Add this to the generic do_bdinfo() and move x86 over to use it. Put it first since pytests rely on seeing it before memstart in find_ram_base(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: sh: Use the generic bd commandSimon Glass
This arch has no code that is not already in the generic function. Drop the arch-specific function and change sh over to use the generic one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: microblaze: Use the generic bd commandSimon Glass
Microblaze prints out ethernet and FDT information. This is useful to most archs, so move it into the generic code and move microblaze over to use it. Note that FDT information is shown for all boards, since they should be using device tree by now. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: nios2: Use the generic bd commandSimon Glass
Nios2 currently has some code to output SRAM information which is behind an #ifdef. No nios2 boards define this option, so the code can be removed. Move Nios2 over to use the generic function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: mips: Use the generic bd commandSimon Glass
MIPS currently has a few extra things which are generally useful. Add them to the generic function and move MIPS over to use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-06-25bdinfo: xtensa: Create a generic do_bdinfo for xtensaSimon Glass
This arch uses only the generic function. It would be nice if all the archs did the same. As a first step, create a new generic function for the 'bd' command and make xtensa use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24cmd: bootefi: Fix fdt_size variable type in efi_carve_out_dt_rsv()Bin Meng
Variable fdt_size should be of type 'fdt_size_t', not 'fdt_addr_t'. Fixes 0d7c2913fdf7: ("cmd: bootefi: Honor the address & size cells properties correctly") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>