summaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)Author
2007-09-24[FIX] repair MFSL commandsMichal Simek
2007-09-24synchronizition with mainlineMichal Simek
2007-09-24Merge ../u-bootMichal Simek
2007-09-16TQM8xx[LM]: Fix broken environment alignment.Wolfgang Denk
With recent toolchains, the environment sectors were no longer aligned to sector boundaries. The reason was a combination of two bugs: 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined for all TQM8xxL and TQM8xxM boards. But "include/common.h", where this gets defined, is not included here (and cannot be included without causing lots of problems). Added a new #define CFG_USE_PPCENV for all boards which really want to put the environment is a ".ppcenv" section. 2) The linker scripts just include environment.o, silently assuming that the objects in that file are really in the order in which they are coded in the C file, i. e. "environment" first, then "redundand_environment", and "env_size" last. However, current toolchains (GCC-4.x) reorder the objects, causing the environment data not to start on a flash sector boundary: Instead of: we got: 40008000 T environment 40008000 T env_size 4000c000 T redundand_environment 40008004 T redundand_environment 40010000 T env_size 4000c004 T environment Note: this patch fixes just the first part, and cures the alignment problem by making sure that "env_size" gets placed correctly. However, we still have a potential issue because primary and redundant environment sectors are actually swapped, i. e. we have now: 40008000 T redundand_environment 4000c000 T environment 40010000 T env_size This shall be fixed in the next version. Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-15Fix do_div() usage in nand process outputMatthias Fuchs
Fix usage of do_div() in nand erase|read|write process output. The last patch to nand_util.c introduced do_div() instead of libgcc's implementation. But do_div() returns the quotient in its first macro parameter and not as result. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-09-15NAND: Add CFG_NAND_QUIET optionMatthias Fuchs
This config option sets the default for the progress information output behavior that can also be configured through the 'quiet' environment variable. The legacy NAND code does not print the current progress info on the console. So this option is for backward compatibility for units that are in the field and where setting the quiet variable is not an option. With CFG_NAND_QUIET set to '1' the console progress info is turned off. This can still be overwritten through the environment variable. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-09-11Merge git://www.denx.de/git/u-bootMichal Simek
2007-09-09Bugfix: make bootm+libfdt compile on boards with no flashGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-09-07PXA270: Add support for multiple serial ports.stefano babic
This patch adds support for multiple serial ports to the PXA target. FFUART, BTUART and STUART are supported. Signed-off-by: Stefano Babic <sbabic@denx.de>
2007-09-07Fix do_bootm_linux() so that multi-file images with FDT blob boot.Bartlomiej Sieka
Fix incorrect blob address calculation in do_bootm_linux() that prevents booting the kernel from a multi-file image (kernel + initrd + blob). Also, make minor updates to the U-Boot's output and to the coding style. Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-09-06bootm/fdt: Only process the fdt if an fdt address was providedGrant Likely
Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style kernels using the board info structure (instead of passing a device tree) This change allows the old style booting to be used if the fdt argument was not passed to 'bootm'. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-29Fix compilation error for omap2420h4_config.Dirk Behme
omap2420h4 switched to cfi, so remove old (already disabled) flash.c and flash_probe() calls in env_flash.c. Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
2007-08-28IDE: - make ide_inb () and ide_outb () "weak", so boards canHeiko Schocher
define there own I/O functions. (Needed for the pcs440ep board). - The default I/O Functions are again 8 Bit accesses. - Added CONFIG_CMD_IDE for the pcs440ep Board. Signed-off-by: Heiko Schocher <hs@denx.de>
2007-08-18ColdFire: Fix some remaining problems with CFG_CMD_Stefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-16ColdFire: Add M54455EVB for MCF5445xTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16ColdFire: MCF5329 Update and cleanupTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16Merge branch 'denx-coldfire' into coldfire-aug2007John Rigby
2007-08-16fdt: suppress unused variable 'bd' warningKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16Fix warnings from of_data copy fixAndy Fleming
Forgot to cast of_flat_tree to ulong. Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16Fix of_data copying for CONFIG_OF_FLAT_TREE-using boardsAndy Fleming
The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed" neglected to *also* put the code inside the similar #ifdef for CONFIG_OF_FLAT_TREE. Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-15Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-08-15Merge git://www.denx.de/git/u-boot into mergeMichal Simek
2007-08-15Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-08-15Fix where the #ifdef CFG_BOOTMAPSZ is placed.Jerry Van Baren
Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT) when it should have gone inside of the conditional. As a result, it broke non-LIBFDT board builds. Also added a missing "not." to the comment. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-15Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-08-14Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk
2007-08-14Merge with /home/wd/git/u-boot/custodian/u-boot-armWolfgang Denk
2007-08-14Fix initrd/dtb interactionAndy Fleming
The original code would wrongly relocate the blob to be right before the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ, if it is defined. So we make two changes: 1) flag the blob for relocation whenever its address is above BOOTMAPSZ 2) If the blob is being relocated, relocate it before kbd, not initrd Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-14Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-08-14Merge with /home/stefan/git/u-boot/zeusStefan Roese
2007-08-14Add MACH_TYPE records for several AT91 boards.Peter Pearse
Merge to two at45.c files into a common file, split to at45.c and spi.c Fix spelling error in DM9161 PHY Support. Initialize at91rm9200 board (and set LED). Add PIO control for at91rm9200dk LEDs and Mux. Change dataflash partition boundaries to be compatible with Linux 2.6. Signed-off-by: Peter Pearse <peter.pearse@arm.com> Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
2007-08-10Improve error print messages.Gerald Van Baren
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10fdt: allow for builds that don't want env and bd_t nodesKim Phillips
protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the area. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-10fdt: do board setup based on fdt address specified on bootm lineKim Phillips
The last fdt patch to bootm did board setup based on the address specified by a prior fdt address command invocation. The bootm code, as its call to fdt_chosen does, should use the fdt specified by the user on the bootm command. Note this restores full functionality for the 8360's existing default boot environment values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr' before booting a kernel). Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-10Call ft_board_setup() from the bootm command.Gerald Van Baren
In the patch titled "Create new fdt boardsetup command..." I removed the call to ft_board_setup() from the routine fdt_chosen(), but I forgot to add a direct call back into cmd_bootm.c This fixes the oversight by adding the direct call to the bootm command. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Create new fdt boardsetup command, fix bug parsing [] form of set values.Gerald Van Baren
Previously ft_board_setup() was called by fdt_chosen() which was not really correctly structured. This splits ft_board_setup() out by creating a new fdt boardsetup command. Fix a bug when parsing fdt set command values which have the square bracket form [00 11 22 33] - the length was updated incorrectly in when parsing that form. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Tighten up the error messages.Gerald Van Baren
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Asthetic improvements: error messages and line lengths.Gerald Van Baren
Tighten up the error messages, split overlength lines. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Fix fdt_chosen() to call ft_board_setup(), clean up long lines.Gerald Van Baren
The fdt_chosen() function was adding/seting some properties ad-hoc improperly and duplicated (poorly) what was done in ft_board_setup() Clean up long lines (setting properties, printing errors). Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10For fdt_find_node_by_path(), handle the root path properly.Gerald Van Baren
Also removes the special case root path detection in cmd_fdt.c since it is no longer necessary. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Replace fdt_node_offset() with fdt_find_node_by_path().Gerald Van Baren
The new name matches more closely the kernel's name, which is also a much better description. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Fix cmd_fdt line lengths, refactor code.Gerald Van Baren
Break lines that were greater than 80 characters in length. Move the fdt print and property parsing code to separate static functions to reduce coding clutter in the fdt_cmd handling body. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10FDT command improvements.Gerald Van Baren
Fix "fdt set" so that it will create a non-existing property. Add "fdt mknode" to create nodes. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Reorganize and fix problems (returns) in the bootm command.Gerald Van Baren
Do *NOT* return after the "point of no return" has been passed. If something goes wrong, the board must be reset after that point. Move the "Transferring control to Linux" debug message back to where it belongs: just before transferring control to linux. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Fix bugs in the CONFIG_OF_LIBFDTGerald Van Baren
Stupid coding mistakes (identified by Timur Tabi, thanks). Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Improve fdt move length handling.Gerald Van Baren
Make the length parameter optional: if not specified, do the move using the current size unchanged. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Minor code clean up.Gerald Van Baren
Declare the variable fdt properly as extern. Call the "set_fn" function pointer the "short way" without the full dereferencing syntax. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10Improve error messages, more informative.Gerald Van Baren
Print more than the raw libfdt error message strings. This is especially useful for cluing in the user when the bootm command aborts due to blob problems. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2007-08-10[ARM] TI DaVinci support, hopefully finalSergey Kubushyn
Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Acked-by: Stefan Roese <sr@denx.de>
2007-08-07Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher
generated by cgit (git 2.34.1) at 2024-12-27 13:22:49 +0000