summaryrefslogtreecommitdiff
path: root/configs/j721e_evm_a72_defconfig
AgeCommit message (Collapse)Author
2020-03-09configs: j721e_evm: Add Support for eMMC bootFaiz Abbas
Enable configs to support eMMC boot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-06configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-04configs: j721e_evm_a72: Add GPIO supportFaiz Abbas
Enable CONFIG_DA8XX_GPIO to enable GPIO support. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_defconfig: Enable PCA953x IO expanderVignesh Raghavendra
Enable PCA953x IO expander to control MMC/SD power lines. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5/a72_defconfig: Enable DFU related configsVignesh Raghavendra
Enable DFU, Fastboot and USB mass storage gadget related configs Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5/a72_defconfig: Enable USB Gadget related configsVignesh Raghavendra
Enable USB Gadget for R5 SPL, A72 SPL and A72 U-Boot to support DFU boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_a72: Fix redundant environment offsetFaiz Abbas
The current environment offset overlaps with the sysfw area and whenever environment is saved in the redundant slot, it overwrites sysfw.itb. Fix the offset to prevent this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-22configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-20configs: j721e_evm_a72_defconfig: Enable I2C and EEPROM supportVignesh Raghavendra
Enable I2C and EEPROM related configs for A72 SPL/U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm: Add configs for environment in eMMCFaiz Abbas
Add config to save and read back environment from eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm: Add configs for ADMA SupportFaiz Abbas
Add configs for ADMA Support. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm_a72_defconfig: Enable USB related configsVignesh Raghavendra
Enable USB host and device related configs. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09configs: j721e_evm_a72_defconfig: Enable DMA and EthernetVignesh Raghavendra
Enable configs related to DMA and Ethernet so as to support networking at U-Boot prompt Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-12-03mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTDMiquel Raynal
Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03mtd: rename CONFIG_MTD -> CONFIG_DM_MTDMiquel Raynal
CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-20env: Finish migration of common ENV optionsTom Rini
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-11configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-24Merge branch '2019-10-24-UFS-support'Tom Rini
- Add Universal Flash Storage (UFS) support
2019-10-24configs: j721e_evm_a72_defconfig: Add HBMC related configsVignesh Raghavendra
Enable HBMC and HyperFlash in A72 SPL and A72 U-Boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-23configs: j721e_evm_a72: Enable configs for UFSFaiz Abbas
Enable SCSI and UFS related configs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-11configs: j721e_evm_a72: Enable DISPLAY_CPUINFOLokesh Vutla
Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11configs: j721e_evm_a72: Disable PSCI_RESETLokesh Vutla
J721E uses TISCI protocol to reset the device and does not support PSCI reset. So disable PSCI reset. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11configs: j721e_evm_a72: Enhance bootcmd to start remoteprocsSuman Anna
The A72 U-boot can support early booting of any of the R5F or C66x or C71x remote processors from U-boot prompt to achieve various system usecases before booting the Linux kernel. Update the default BOOTCOMMAND to provide an automatic and easier way to start various remote processors through added environment variables. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com>
2019-10-11configs: j721e_evm_a72: Enable R5F and DSP remoteproc driverLokesh Vutla
Enable R5F and DSP remoteproc drivers for j721e running on a72. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-25Convert CONFIG_SYS_SPI_U_BOOT_OFFS to KconfigHannes Schmelzer
This converts the following to Kconfig: CONFIG_SYS_SPI_U_BOOT_OFFS Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> [trini: Expose this for SPL_SPI_SUNXI for now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-31configs: j721e_evm_a72: Disable K3_SYSTEM_CONTROLLERSuman Anna
The K3 System Controller driver is used for loading and starting the System Firmware, and is used only on R5 SPL. It need not be enabled and built for the A72 U-Boot and SPL, so disable it from the j721e_evm_a72 defconfig. While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A72 SPL. Signed-off-by: Suman Anna <s-anna@ti.com>
2019-07-26configs: j721e_evm_a72: Add initial supportLokesh Vutla
Add initial defconfig support for J721e that runs on A72. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Add MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2024-12-26 21:59:59 +0000