summaryrefslogtreecommitdiff
path: root/configs/orangepi_zero_defconfig
AgeCommit message (Collapse)Author
2017-10-25SPL: SPI: select SPL_SPI_FLASH_SUPPORT on SPL_SPI_SUNXIAndre Przywara
The Allwinner SPI flash SPL boot support is guarded by the SPL_SPI_SUNXI symbol. But despite its generic name, the actual only use case for this is to provide SPI flash support to the SPL, which requires CONFIG_SPL_SPI_FLASH_SUPPORT to be defined. Select this symbol from the SPL_SPI_SUNXI Kconfig definition. This avoids doing this explicitly in the defconfig, and fixes SPI booting on the Pine64 SoPine (and -LTS version) and the OrangePi Win board (both with SPI flash). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-10cmd: Toggle the default value of CONFIG_CMD_IMLSTuomas Tynkkynen
Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-09-01configs: Migrate all of the existing USB symbols, except fastbootTom Rini
This syncs all of the currently Kconfig'd symbols out of the headers and into the defconfig files. This has two exceptions, first am335x_evm needs to be converted to DM in SPL and then it can stop undef'ing CONFIG_DM_USB. Leaving this as-is results in a build failure, and without work, run time failure. The other case is am43xx_evm.h and in turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB host mode in SPL, but still desire to have gadget mode in U-Boot proper. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-11sunxi: reduce Orange Pi Zero DRAM clock speedClément Bœsch
Using `fel-boot-lima-memtester-on-orange-pi-pc 672` on an Orange Pi without heatsink results in the following error after a few minutes: WRITE FAILURE: 0x00200000 != 0xffdfffff at offset 0x0137f47c (bitflip). Also, the constructor repository (github/orangepi-xunlong) seems to contain that 624 Mhz clock speed in its u-boot fork. It may be that 672 Mhz is the advertized overclocked speed. According to http://linux-sunxi.org/Orange_Pi_PC#DRAM_clock_speed_limit it may be worth decreasing that value with other Orange Pi boards. See also e7d6aa0b74b7f4d08ee68da8a586c76c761348e2. Signed-off-by: Clément Bœsch <u@pkh.me> [Add s-o-b line] Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-06-19configs: Resync defconfigsTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-28sunxi: Disable DE2 video driver where not neededJernej Skrabec
Because DE2 driver is enabled by default, it is nice to disable it on all boards which don't have any video output. List of such boards is also much shorter. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-13configs: Re-syncTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-15sunxi: OrangePi Zero: defconfig: enable SPI flashAndre Przywara
Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from which the board can actually boot from. Enable the SPL support for the SPI controller and SPI flash to allow putting the SPL, the DT and U-Boot proper into there. This will let a board boot without an SD card inserted. The flash chip can be written with a version of the sunxi-fel tool. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-01-15sunxi: add orangepi zero defconfigIcenowy Zheng
Orange Pi Zero is a board designed by Xunlong. It has an Allwinner H2+ SoC (similar to H3, which shares the same SoC ID), 256MB/512MB RAM, Allwinner XR819 SDIO Wi-Fi, a MicroUSB port which is used to power the board (also capable of OTG), a USB Type-A socket and a MicroSD slot. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Reviewed-by: Jagan Teki <jagan@openedev.com>